2. Article
  3. SKU13506

Article SKU13506 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the KEMPEL Bench. This manual provides a detailed parts list as well as step-by-step guidelines to help you in setting up your bench. It also highlights the importance of regular maintenance to ensure optimal use. I'm here to assist you with any questions you might have about the document provided.
  • What should I place the parts on?
    How to align nut when securing bolts?
    When should I fully tighten all bolts ?
Assembly Instructions
KEMPEL
Bench
VERSION 1.0
ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having diculty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
2
TIME # OF PEOPLE DIFFICULTY
20 min
Page 2 of 4
KEMPEL Bench
PARTS INVENTORY
ID DESCRIPTION QTY
LEG FRAME 2
CENTER FRAME PIECE 1
M6 × 50MM BOLT 1
M6 × 13MM NUT 4
M6 × 75MM BOLT 4
ALLEN KEY 1
M6 × 55MM BOLT 2
WASHER 2
Hardware may loosen over time, check
the bolts regularly and tighten if necessary.
VENTOR
VENTOR
VENTOR
VENTOR
VENTOR
VENTOR
Page 3 of 4
1
× 4
KEMPEL Bench
Use bolt (C) to align each nut (D)
when securing bolts (E) from the side.
!
100%
85%
50%
Page 4 of 4
2
× 2
KEMPEL Bench
100%
85%50%
Fully tighten all bolts
before turning upright.
!
/