2. CMP
  3. LED STRIP

CMP LED STRIP Owner's manual

  • Hello! I've reviewed the instruction manual for the CMP LED Strip models 25677-530-950, 25677-630-950, 25677-730-950, and 25677-830-950. This document details the steps for safely removing and replacing the LED strip, including wire plug disconnection, strip installation, and pull wire usage for longer models. I'm ready to answer any questions you have.
  • What should I do before starting the replacement?
    How do I disconnect the wire?
    What should I do if the LED strip is a longer model?
    Is there something I should use to ease the installation?
CUSTOM MOLDED PRODUCTS | 36 HERRING ROAD, NEWNAN, GA 30265 | WWW.C-M-P.COMjh0115
®
REPLACEMENT LED STRIP
CMP 25677-530-950; 25677-630-950; 25677-730-950; 25677-830-950
INSTRUCTION MANUAL
1. Remove access door carefully
4. Pull the LED Strip from channel
(some models may include a retaining
clip)
5. On longer models, feed pull wire
from opposite side
8. Reattach plug to main power cable.
Put wire back into channel
2. Pull wire plug from channel
3. Unscrew plug to separate it from the
main power cable
6. Attach pull wire through hole in the
end of the LED Strip
7. Lightly lubricate channel for easier
installation. Carefully pull LED Strip into
channel
9. Reinstall access door
/