HiB Atto Fitting Instructions

  • Hello! I've reviewed the fitting instructions for the Atto Series bathroom accessories. This document outlines the steps for proper installation, including drilling and securing the components. It also provides valuable care information to ensure the longevity of the product. I'm ready to answer any questions you have about the installation or maintenance of your bathroom accessory.
  • What should I use to clean the product?
    What should I do after spilling water on the product?
    Can I install the product on plasterboard walls?
6
FI#10 004 R190626 Ver No. 1.0 Oct 2019
Installation Guideline
Care Instructions
Using a suitable drill bit, drill holes in the marked positions to a suitable depth. If drilling through tile, use a ceramic drill bit.
Insert wall plugs level with the surface of the wall. If fitting to a tiled surface, wall plugs should be inserted below the tile surface to avoid
cracking. NB. For plasterboard walls, specialist fixings should be purchased, available from any DIY or hardware store.
Fig.4 - Ensure the retaining grub screw is installed securely.
Do not use abrasives or solvents when cleaning this product.
Wipe off all water spillages as soon as possible using a so, damp cloth.
/