HiB Toilet Brush Holders Fitting Instructions

  • Hello! I've reviewed the fitting instructions for the HiB ATTO Hecto & Atto wall-mounted toilet brush and holder. This document provides detailed guidance on the installation process, including drilling, wall plug insertion, and securing the unit. It also includes care instructions to ensure longevity of the product. I am ready to answer any questions you may have regarding this product.
  • What type of drill bit should be used for drilling through tile?
    What type of fixings should be used for plasterboard walls?
    What should I use to clean the product?
6
FI#10 012 R190926 Ver No. 1.0 Oct 2019
Installation Guideline
Care Instructions
Using a suitable drill bit, drill holes in the marked positions to a suitable depth. If drilling through tile, use a ceramic drill bit.
Insert wall plugs level with the surface of the wall. If fitting to a tiled surface, wall plugs should be inserted below the tile surface to avoid
cracking. NB. For plasterboard walls, specialist fixings should be purchased, available from any DIY or hardware store.
Fig.4 - Ensure the retaining grub screw is installed securely.
Do not use abrasives or solvents when cleaning this product.
Wipe off all water spillages as soon as possible using a so, damp cloth.
/