Baxton Studio BBT5467.11-Walnut Rattan/Beige-CC Assembly Instructions

Type
Assembly Instructions

This manual is also suitable for

ASSEMBLY INSTRUCTIONS
PART LIST
ITEM DESCRIPTION BOX QTY
A CHAIR BACK 1 1 PC
B SEAT FRAME 11 PC
C ARM L/R 1 2 PCS
D CUSHION 1 1 PC
HARDWARE LIST (BOX : 1)
ITEM DESCRIPTION QTY
1 JCBC BOLT M6 x 35mm 2 PCS
2 JCBC BOLT M6 x 60mm 4 PCS
3 JCBC BOLT M6 x 80mm 2 PCS
4 JCBC BOLT M6 x 90mm 2 PCS
5 M6 FLAT WASHER 10 PCS
6 M6 SPRING WASHER 10 PCS
7 WOOD SCREW M4 x 32mm 9 PCS
8 WOOD DOWEL M12 x 30mm 2 PCS
9 M4 ALLEN KEY (BALL SHAPE) 1 PC
STEP 1
1 OF 4
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete before assembly. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTION : 1. Do not FULLY - TIGHTEN the nuts or nuts bolts until they are ready for assembly.
2. Do not OVER - TIGHTEN the nuts or bolts to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tools needed : Screwdriver (not provided).
STEP 2 Don't screw tight
A
B
B
9
1
6
5
MODEL : BBT5467.11 A4 - CC
ASSEMBLY INSTRUCTIONS
STEP 3
2 OF 4
STEP 4
STEP 5 STEP 6
x2
Don't screw tight
Don't screw tight
9465
365
C
8
C
CA
B
C
A
9265
ASSEMBLY INSTRUCTIONS
STEP 7 STEP 8
3 OF 4
Place the chair on the flat surface and adjust the
alignment and balance of the legs then ,
Please screw tight the steps 2 , 3 , 6 bolts.
STEP 9 STEP 10
Palm
C
C
7
C
D
D
ASSEMBLY INSTRUCTIONS
STEP 11 STEP 12
4 OF 4
x7
7
B
B
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Baxton Studio BBT5467.11-Walnut Rattan/Beige-CC Assembly Instructions

Type
Assembly Instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI