2. Schneider Electric
  3. NSYS3X8625

Schneider Electric NSYS3X8625, Spacial S3X Operating instructions

  • Hello! I'm a chat assistant and I've reviewed the product detail document for the Schneider Electric SPACIAL S3X enclosure. The document outlines the different fastener types and their torque specifications. I'm ready to answer your questions about this product.
  • What torque is required for type 1 fasteners?
    What diameter is type 2 fastener?
    What is the torque for type 3 fastener?
SPACIAL S3X
M6
5 Nm
44,25 lb-in
type 4
diam. 6
type 3
M8
15 Nm
132,75 lb-in
type 2
diam. 8
type 1
Released for Manufacturing
Printed on 2018/11/14
2
1
A
1 2
4 5
Ax2
2
1
3
1
2
1
2
3 Nm
26,55 lb-in
type 1 / type 2
3 Nm
26,55 lb-in
x2 x2
type 2
x4 x4
x4x4
Released for Manufacturing
Printed on 2018/11/14
3
type 3 / type 4
Released for Manufacturing
Printed on 2018/11/14
7313850001- 05
Schneider Electric Industries SAS
35, rue Joseph Monier
CS 30323
F - 92506 Rueil Malmaison Cedex
www.schneider-electric.com
Ce produit doit être installé, raccordé et utilisé en respectant les normes et/ou les règlements
d'installation en vigueur.
En raison de l'évolution des normes et du matériel, les caractéristiques et cotes d'encombrement
données ne nous engagent qu'après confirmation par nos services.
This product must be installed, connected and used in compliance with prevailing standards
and/or installation regulations.
As standards, specifications and designs change from time to time, always ask for confirmation of the
information given in this publication.
© 2018 Schneider Electric - All rights reserved.
Released for Manufacturing
Printed on 2018/11/14
/