Spedal CL796P User manual

Brand: Spedal

Model: CL796P

Type: User manual

Spedal CL796P is a smart multimedia dashcam that combines advanced driving recording and entertainment features. With a 7-inch IPS screen, you can conveniently view and playback your recordings. The device supports loop recording, allowing for continuous capturing of footage. It also features a gravity sensor for incident detection and a built-in microphone for audio recording. Additionally, the CL796P offers CarPlay and Android Auto connectivity, enabling you to seamlessly integrate your smartphone for navigation, music, and more.

018C2717-EN

USER MANUAL

CL796P / CL796T

SMART MULTIMEDIA DASHCAM

1. Disclaimer And Safety Guidelines

1.1 Disclaimer

1.2 Safety Guidelines

Thank you for purchasing this Spedal product. The content mentioned in this manual is related to your safety and legal rights and responsibilities. Before

using this product, please read this document carefully to ensure proper product settings. Failure to follow the instructions and warnings in this document

may result in injury to you and people around you, as well as damage to this product or other objects nearby. The ﬁnal interpretation right of this docu-

ment and related documents belongs to Shenzhen Xinzhuang Goodo Technology Co., Ltd. Subject to update without notice. Please visit http://spedal.cc for

the latest product information.

Once you use this product, it is deemed that you have carefully read the disclaimer and warnings, and understand, recognize andaccept all the terms and

contents of this statement. You undertake to take full responsibility for the use of this product and the possible consequences.

Spedal is not responsible for damage, injury, or any legal liability arising directly or indirectly from the use of this product. Users should follow all safety

guidelines including but not limited to those mentioned in this article.

● Do not operate this product when driving;

● Do not install or operate this product with wet hands;

● Do not install this product in a place with high temperature, humidity, ﬂammable, explosive gas or liquid;

● Do not install this product in an area that interferes with the driver's sight or driving safety;

● Do not install this product on the airbag cover or within the working range of the airbag;

● Do not leave this product in a closed vehicle with high temperature for a long time;

● Do not operate this product over rated voltage;

1.2.1 Warnings

01 02 03 04

05 06 07 08

09 10 11 12

2. Preparations For Product Use

2.1 Products And Components

● CL796P / CL796T Device x1 ● Suction Bracket x1 ● Dash Mount x1 ● Rear Camera Cable - Wire A x1

（21.3ft）

1.2.2 Precautions

● Do not p ress the lens too hard to avoid damage or dislocation of the lens;

● Do not directly touch the lens surface, so as not to affect the recording effect;

● Do not remove the memory card during the shutdown process to avoid ﬁle damage;

● When using the memory card for the ﬁrst time, please format it on this product to ensure stable reading and writing;

● When not using the product for a long time, please pull out the memory card to ensure the performance of the memory card.

● Do not use non-original cables and accessories;

● Do not use sharp objects such as awls or scissors to cut this product and its accessories;

● Do not disassemble, repair or modify this product and accessories by yourself;

● Do not install, use or place this product within the reach of children under the age of 16.

01 02 03 04

05 06 07 08

09 10 11 12

● Extension Cord - Wire B x1

（16.5ft,CL796P）

● Extension Cord - Wire C x1

（41ft,CL796T）

● Power Cable x1 ● USB - Lightning Cable x1

Note: Do not use non-original cables and components. Gifts and components are not covered under warranty. The package

contents of this product are subject to change without prior notice, and the actual package contents shall prevail.

● USB - TypeC Cable x1 ● Audio Cable x1 ● Rear Camera x1 ● Rear Camera Bracket x1

● 32GB TF Card x1 ● 3M Sticky x4 ● Screw x4 ● Screwdriver x1

● Cable Hiding Clip x8 ● Crowbar x1

01 02 03 04

05 06 07 08

09 10 11 12

2.2 Product Introduction

GPS Port

AV IN Port

TF Card Slot

mini USB Port

（for wireless cameras）

Power

Suction Bracket

Installation

Microphone

7inch IPS Screen

Dash Mount

Microphone

USB Port

AUX OUT Port

Power Cable

01 02 03 04

05 06 07 08

09 10 11 12

2.3 Installation Guide

2.3.1 TF Card Installation

● Insert the TF card into the TF card slot with the metal side facing

down.

● Please use the 32GB TF card that comes with this product. The

self-provided TF card should meet the following requirements: Class 10 or

above, the capacity does not exceed 128GB.

2.3.1

2.3.2 Suction Bracket Installation

1. Align the screw of the suction cup bracket with the screw hole on the

top of the device, turn the suction cup bracket clockwise, and tighten the

screw;

2. Adjust the angle of the screen and lens of the device;

3. Select a suitable position (such as the center of the front windshield),

ﬁx the suction cup on the glass, press the locking piece.

2.3.2

01 02 03 04

05 06 07 08

09 10 11 12

2.3.3 Dash Mount Installation

1. The wire on the back of the device passes through the dash mount

from the hole in the middle of the clip;

2. Push up the snap of the dash mount, align with the hole on the back of

the device, and ﬁx the bracket;

3. Adjust the angle of the screen and lens，Fix the dash mount on the

dashboard;

4. Adjust the angle of the screen and lens.

2.3.3

2.3.4

2.3.4 Device Installation

1. Insert the power cable into the car cigarette lighter, and connect the

other end to the power interface of the device;

2. Use suction bracket or dash mount to ﬁx the device. (Refer to [2.3.2

Suction Bracket Installation] / [2.3.3 Dash Mount Installation]).

2.3.4

01 02 03 04

05 06 07 08

09 10 11 12

2.3.6 Audio Cable Installation

1. Insert the audio cable into the car AUX port, and connect the other end

to the AUX OUT port of the device;

2. Set the car's audio input mode to AUX audio input. After the connec-

tion is successful, music, navigation, calls, etc. can be played through the

audio system in the car.

2.3.5 Rear Camera Installation

1. Connect the rear camera to the Rear camera cable - Wire A, and insert

the other end into the rear camera port (AV-IN) of the device;

2. Use the rear camera bracket to ﬁx the rear camera above the license

plate;

3. Please tear off the rear camera lens protective ﬁlm before use;

4. Please adjust the lens to a suitable angle.Tighten the screws.

Note: If the Rear camera cable-Wire A(21.3ft) is not long

enough, you can use the extension cord-Wire B(16.5ft,-

CL796P) or extension cord-Wire B(41ft,CL796T) in the pack-

age to extend the connection.

2.3.5

01 02 03 04

05 06 07 08

09 10 11 12

3. Features And Settings

3.1 Home Screen

12:00

01/03/2022

CarPlay Android Auto DVR

Playback

Time & Date

Quick adjustment of

screen brightness

Quick adjustment of

system volume

Driving recording and

system settings

Screen Brightness Adjustment

Volume Adjustment

Settings Mode

CarPlay Mode

DVR Mode

Playback Mode

FM Mode

Android Auto Mode

iPhone connection to the device

Driving record mode

Play back photos and videos

Mobile phone FM connected

to car stereo

Android phone connection

to the device

01 02 03 04

05 06 07 08

09 10 11 12

3.2.2 General Settings

● Format: Delete all data on the TF card. This operation is irreversible, please back up the images or photos before performing this operation.

● Auto screen off: Set the time for the screen to automatically turn off. 10 seconds, 30 seconds, 1 minute or off can be selected.

● Language setting: Set the language displayed by the system. 简体中文 , 繁體中文 , English, Français, Español, Português, Deutsch, Italiano, Pусский, 日本

語 or can be selected.

● System volume: Set the system volume.

● Key tone: Set whether the key tone is enabled. Close or open can be selected.

● Device Time: Set date, time and date format.

● Restore to factory settings: Restore all settings to the factory default values.

● Device Information: View the current ﬁrmware version information of the host.

3.2 Settings Mode

3.2.1 Video Settings

Click "Settings" on the home screen to enter "Video Settings" (driving record settings).

● Loop recording: Set the time of each recording. 1 minute, 2 minutes, 3 minutes or off can be selected.

● Crash Sensitivity: Set the sensitivity of the gravity sensor. High, medium, low or off can be selected.

● Time Watermark: Set whether to mark the time at the same time when recording. Close or open can be selected.

● Recording sound switch: Set whether to record sound at the same time when recording. Close or open can be selected.

● Exposure: Under different light, you can get better shooting effect by adjusting the EV value. -3, -2, -1, 0, 1, 2 or 3 can be selected.

● Light source frequency: According to different countries or regions, the power line frequency can be set to 50Hz or 60Hz.

01 02 03 04

05 06 07 08

09 10 11 12

3.3 / 3.4

Insert one end of the USB - lighting cable into the mobile phone, and the

other end into the USB port of the device; after the connection is suc-

cessful, the device will enter Carplay mode automatically.

Note:

1. Please make sure your iphone version is higher than

iOS9;

2. If you want to control the device by voice, please open

Siri in the iphone.

Insert one end of the USB - type C cable into the Android phone, and the

other end into the USB port of the device; after the connection is suc-

cessful, the device will display the Android Auto working interface, and

the mobile phone will display the Android Auto application icon.

Note: Please make sure your Android phone version is

higher than Android 11.

3.3 Carplay Mode

3.4 Android Auto Mode

01 02 03 04

05 06 07 08

09 10 11 12

3.5 DVR Mode

Click "DVR" on the home screen to enter the DVR mode.

04/06/2022 05:37:5000:54 1080P

Resolution

Video Length

Recording Mode

Recording Status

Photograph

Playback Mode

Start / stop Recording

Start / stop

Sound Recording

Date

Time

TF Card Status

Recording Status

Lock Current Video

Back To The Home

Switch Camera

Settings Mode

01 02 03 04

05 06 07 08

09 10 11 12

3.6 Playback Mode

Click "Playback" on the home screen to enter the playback mode, where you can play, lock, unlock, delete videos or pictures.

1/126Front

20220428_221206

Rear

20220428_221321

20220428_221614

20220428_221801

20220429_111026

20220429_111230

20220429_111442

20220429_111507

Rear Camera

Front Camera

Video File

Back To The Home

Lock / Unlock Files

Current Page Nr.

/ Total Page Nr.

Play

Pause / Play

Delete Files

01 02 03 04

05 06 07 08

09 10 11 12

95.00

OFF

88 93 108103

Frequency Adjustment

Save Current Frequency

Back To The Home

Pointer

FM Frequency

Frequency Adjustment

Scale

Turn on / off FM

3.7 FM Mode

Click "FM" on the home to enter FM mode.

1. Adjust the car FM to a frequency that is not occupied by the broadcast, and adjust the device FM to the same frequency; for example, adjust the car FM

to 91.0MHZ (if not occupied), and then adjust the the FM frequency of the device to 91.0MHZ, as well, and the FM function is turned on; after the connec-

tion is successful, the sound on the device will be transmitted to the car speakers.

2. When the FM is on, you can select the button or slide the pointer to adjust the frequency.

Note: If you do not need to use the car audio, please set the FM to OFF, otherwise the device will not output sound.

01 02 03 04

05 06 07 08

09 10 11 12