2. NextBase
  3. NBDVR380GW-B
NBDVR380GW-B

NextBase NBDVR380GW-B User manual

  • Hello! I have reviewed the user manual for dash cam installation. This document provides instructions for a few steps of in vehicle installation, including replacing the side cover, removing the camera from the mount, removing the cable lock, and connecting power using the provided car power cable. I am ready to help you with any questions you might have about this process.
  • How do you replace the side cover?
    How do you remove the camera from the mount?
    How do you remove the cable lock?
IN VEHICLE INSTALLATION (CONTD.)
3. Replace side cover
Click the side cover back in to place, with the curved edge engaging firstly.
4. Remove camera from mount
Slide the mount towards the camera lens to disengage the mount.
21
IN VEHICLE INSTALLATION (CONTD.)
5. Remove cable lock
The cable lock is in the corner of the mount and can be twisted away from the mount itself and
then disengaged completely from the mount.
6. Connect power
Connect the supplied Car Power cable in to the Mini USB socket marked ‘For use with 90
connector’.
Note:
- The Nextbase hardwire kit connector will utilize the mini USB socket marked ‘For use with
straight connector’.
22
/