Andrew James AJ000681 User manual

Please read the manual fully before using the appliance and keep the

manual safe for future reference.

Food Processor and Blender

Pour la version française veuillez consulter notre site de web

www.andrewjamesworldwide.com

Die deutsche Version nden Sie auf unsere Webseite

www.andrewjamesworldwide.com

2

Safety Guide

When using any electrical

appliance, basic safety

precauons should always be

followed, including:

 This appliance can be used by

children aged from 8 years and

above and persons with

reduced physical, sensory or

mental capabilies or lack of

experience and knowledge if

they have been given

supervision or instrucon

concerning use of the

appliance in a safe way and

understand the hazards

involved. Children shall not

play with the appliance.

Cleaning and user maintenance

shall not be made by children

unless they are older than 8

and supervised. Keep the

appliance and its cord out of

reach of children less than 8

years old.

 Always ensure the voltage on

the rang label corresponds to

the voltage in your home.

 Check the power cord and

plug regularly for any

damage. If the cord or the

plug is damaged, it must be

replaced by a qualied

electrician or a service repair

centre. If in doubt please

contact our customer service

team.

 The appliance is intended for

domesc use only. Industrial

or commercial use will void

the warranty. The supplier

cannot be held responsible

for injury or damage if the

appliance has been used for

anything other than its

intended use.

 Incorrect operaon and use

can damage the appliance

and cause injury to the user.

 Do not use the appliance if it

has been dropped or

damaged in any way. If the

unit has been damaged take

the unit for examinaon and

3

or repair by an authorised

service agent.

 Do not immerse or expose the

motor assembly, plug or the

power cord in water or any

other liquid for any reason.

 If the supply cord is damaged,

it must be replaced by the

manufacturer or by someone

who is suitably qualied to

avoid a potenal hazard.

 Do not let the cord hang over

the edge of a table or counter.

Ensure that the cord is not in a

posion where it can be pulled

or tripped over accidentally.

 Do not allow the cord to touch

hot surfaces and do not place

the cord near hot gas, electric

burners or in a heated oven.

 Use of an extension cord with

this appliance is not

recommended. However if it is

necessary to use an extension

cord, ensure that the

extension cord is equal to or

greater than the power

consumpon of the appliance

to avoid overheang of the

appliance and extension cord.

Do not use any other

appliance on the extension

cord. Do not place the

extension cord in a posion

where it can be pulled on by

children or animals or be

tripped over.

 Always operate the appliance

on a smooth, even and stable

surface. Do not place the unit

on a hot surface.

 Always remove the plug of

the appliance safely. Do not

pull on the appliances cord to

remove the appliance plug

from the electrical socket.

 Never handle or operate the

appliance with wet hands.

Appliance specic safety

instrucons

 Only use the appliance for a

maximum of 2 minutes. Allow

4

the appliance to cool for a

short period aerwards.

Aer using the appliance for

more than 5 x 2 minute

periods allow the appliance

to cool for 90 minutes.

 Clean all parts and accessories

that come into contact with

food before rst me use.

 Never exceed the maximum

quanes stated on the bowl.

 Never leave the appliance

unaended while it is in use.

 Never touch parts of the

appliance whilst they are

moving.

 Refrain from pung utensils

or ngers inside the lid

opening.

 Never press down ingredients

into the feed opening with

your hands.

 Do not use the appliance for

hard ingredients such as

frozen meats, cheese, bones

etc.

 Always ensure the appliance

is turned o before removing

the lid and any aachments.

 Always remove the blades

before removing the

ingredients from the bowl.

 Demonstrate care when you

are handling, ng, cleaning

or removing the blades from

the food processor.

 Switch o the appliance and

remove all accessories before

cleaning.

 The appliance has an

incorporated protecve

device to protect the

appliance against high

temperatures. If the

temperature becomes too

high the appliance will

automacally turn o and will

resume operaon once the

appliance has fully cooled

down (Approx. 15 minutes).

 Do not push food down the

chute with ngers or other

5

objects such as knives, always

use the pusher provided with

the processor.

Appliance Illustraon

6.

1. Motor Base 2. Drive Axis 3. Bowl

4. Blade Adapter 5. Bowl Cover 6. Food Pusher

7. Disc Holder 8. Slicing Disc 9. Shredding Disc

10. French Fry Disc 11. Chopper 12. Kneading Disc

13. Emulsifying Disc 14. Citrus Fruit Plate 15. Citrus Juicing Head

16. Blending Measuring Cup 17. Blending Cover 18. Blending Jug

5.

15.

14.

4.

3.

2.

1.

10.

9.

8.

7.

13.

12.

11.

16.

17.

18.

6

Before rst me use

 Unpack the appliance and remove all

packaging.

 Disassemble the unit before rst me

use.

 Wash all parts of the appliance before

rst me use. Refer to cleaning and

maintenance.

 Do not immerse the motor unit (1) in

water.

Chopping

1. Place the drive axis (2) onto the motor

base (1). Ensure that the drive axis (2)

ts into the ridges in the motor base (1).

2. Posion the bowl (3) onto the drive axis

(2) and rotate it clockwise unl it locks

into the motor base (1).

3. Fit the blade adaptor (4) onto the

drive axis (2) inside of the bowl (3).

4. Fit the chopper blade (11) onto the

blade adaptor and turn unl it locks

into place.

5. Place the bowl cover (5) onto the bowl

(3) and rotate it clockwise unl a

“clicking” sound can be heard. This

signals that the lid has been securely

ed.

6. Turn the appliance on by rotang the

speed dial on the motor base (1) to

seng 1 or 2.

7. Place the ingredients into the feeding

tube and press down gently using the

food pusher (6).

Food Maximum per batch

Chocolate 100g

Cheese 200g

Meat 500g

Spices 50-100g

Fruit & Vegetables 100-300g

Onion 500g

Recommended amounts

7

Kneading Disc

1. Place the drive axis (2) onto the motor

base (1). Ensure that the drive axis (2)

ts into the ridges in the motor base (1).

2. Posion the bowl (3) onto the drive axis

(2) and rotate it clockwise unl it locks

into the motor base (1).

3. Fit the blade adaptor (4) onto the drive

axis (2) inside of the bowl (3).

4. Place the kneading disc (12) onto the

blade adaptor (4).

5. Turn the kneading disc (12) unl it locks

into place.

6. Place the dough ingredients into the

bowl (3).

7. Place the bowl cover (5) onto the bowl

(3) and rotate it clockwise unl a

“clicking” sound can be heard. This

signals that the lid has been securely

ed.

8. Place the pusher (6) into the feeder

tube and plug the appliances cord into

the electrical socket. Turn the speed dial

to “1” or “2”.

Note:

 Always aach the kneading disc in the

bowl before starng the appliance.

 Knead for between 30-90 seconds.

Recommended amounts

Blender

 Ensure that the motor base (1) is

securely placed on a at level surface.

 Place the ingredients into the blending

jug (18).

 Aach the blending jug (18) to the

motor base (1) by rotang it clockwise

unl it is fully locked into posion.

 Place the blending cover (17) onto the

blending jug (18).

 Plug the appliance into the electrical

socket. Turn the appliance speed to

the required seng.

Slicing / Shredding / French Fry Disc

Assembly

1. Place the drive axis (2) onto the motor

base (1). Ensure that the drive axis (2)

ts into the ridges in the motor base

(1).

2. Posion the bowl (3) onto the drive

axis (2) and rotate it clockwise unl it

locks into the motor base (1).

3. Posion the required disc (8/9/10) in

the disc holder (7).

4. Fit the disc holder (7) onto the drive

Food Maximum per batch

Flour 400g

Egg 5

8

axis (2).

5. Place the bowl cover (5) onto the bowl

(3) and rotate it clockwise unl a

“clicking” sound can be heard. This

signals that the lid has been securely

ed.

6. Place the ingredients into the feeder

tube and start the appliance by turning

the speed seng to 1 or 2.

7. Place the pusher (6) into the feeder

tube to feed the ingredients into the

appliance.

Note:

 Choose the required disc according to

the ingredients and the desired shape of

the food.

 Always push soly down on the feeding

tube.

 It is recommended to pre-cut food to a

smaller size.

 Choose a low speed seng and increase

gradually if required.

Citrus Juicer

1. Place the drive axis (2) onto the main

base (1).

2. Posion the bowl (3) onto the drive axis

(2) and rotate it clockwise to t it

correctly onto the main base (1).

3. Place the citrus juicing plate (14) on the

bowl (3) ensuring that the clip of the

juicing plate fully ts into the locking

system of the bowl.

4. Cut the fruit in half in preparaon for

juicing.

5. Turn the appliance on and set the

speed seng to 2. Press the citrus

halves onto the rotang citrus juicing

head (15) to juice the fruit.

Emulsifying Disc

1. Place the drive axis (2) onto the main

base (1).

2. Posion the bowl (3) onto the drive

axis (2) and rotate it clockwise to t it

correctly onto the main base (1).

3. Place the blade adaptor (4) onto the

drive axis (2).

4. Fit the emulsifying blade (13) onto the

blade adaptor (4).

5. Turn the emulsifying blade (13) unl it

locks into place.

6. Place the bowl cover (5) onto the bowl

(3) and rotate it clockwise unl a

“clicking” sound can be heard. This

signals that the lid has been securely

ed.

7. Place the ingredients into the feeder

tube and start the appliance by

turning the speed seng to 1 or 2.

Food Maximum Time per batch

Egg 2-5 30-60 sec

So

Cheese

350g 20 sec

9

Cleaning

 Always unplug the processor from the

power outlet before cleaning the

appliance.

 Clean the power unit with a so, damp

cloth. Do not put the power unit under

running water and do not submerge it in

water or any other liquids.

 All accessories should be washed by

hand. They are not dishwasher safe. For

hand washing use tepid water and

normal detergent. Do not use chemical

or abrasive washing up liquids.

 Store the appliance in a dry area,

preferably in its original box.

Troubleshoong

Problem Soluon

The appliance does not work

 Ensure that the appliance is correctly assembled.

 Make sure the plug is correctly installed into the

electrical socket.

 Check if the mains has tripped or this is a power

outage.

Machine suddenly stops running

 The bowl may be loose due to vigorous processing.

 Please re-install the bowl cover.

The motor is running, but the

 Make sure that the drive axis is correctly installed.

10

UK and EU Guarantee

Your new Andrew James product comes

with a 24 month guarantee and a 2 year

xed warranty, eecve from receipt con-

rmaon. Your receipt or order number is

required as proof of purchase date so it is

imperave that you keep it safe. This guar-

antee only applies if the item has been

used solely for the use intended, and all

instrucons have been followed according-

ly. Please note this product is only for do-

mesc use only and is not for commercial

use.

Abuse of your product will invalidate the

guarantee. Returned goods can only be

accepted if repackaged properly within the

original colour product box, and presented

with the original receipt of sale / order

number. This does not aect your statuto-

ry rights.

Returned products must be cleaned and

returned to us in as close to delivery condi-

on as possible.

If your product develops a problem within

the rst 12 months of the xed warranty,

we will pay all shipping costs to have it

returned to us. Aer 12 months the cus-

tomer will be liable for the cost of return-

ing the product to us. We will then pay to

have the repaired/replaced item shipped

back to the customer.

If you wish to return your item for a full

refund, you have the right to do so within

the rst 7 days. For our returns policy

please go to:

www.andrewjamesworldwide.com

Customers are responsible for any taxes

applied to our products when they are

shipped outside of the EU.

All of our prices are inclusive of VAT.

Once a product has been returned to us,

we will aim to repair or replace it within

30 days of receipt.

The guarantee does not cover any defect

arising from improper use, damage, build

-up of lime scale or repair aempts made

by third-pares. Also, the guarantee does

not cover normal wear and tear of indi-

vidual parts.

Electrical Informaon

Always ensure the voltage on the rang

label corresponds to the power supply

where the product is being used.

Class II double insulaon. This tool is

double insulated therefore no

earth connecon is required.

Precauons should be followed for safe

cable management and connecon to the

power supply

If a new mains plug needs to be ed

follow the ng instrucons supplied

with good quality BS1363A plugs. If in

doubt consult a qualied electrician or

appliance repair agent.

Warning! For double insulated product

no connecon is made to the Earth termi-

11

nal.

Recommended fuse: 13A

If an extension cable is required, a 2 core

or 3 core (earthed) extension can be used.

To avoid overheang the extension cable

should be rated no less than 13A and be

fully unwound before use.

Do not aempt to modify electrical plugs

or sockets or aempt to make an alterna-

ve connecon to the electrical supply.

Disposal of the appliance

Waste Electrical & Electronic Equipment

(WEEE) Waste & Recycling

Disposal of Electrical and Electronic

Waste

Non-household waste. This product must

not be disposed of together with ordinary

household waste.

Separate collecon of used products,

baeries and packaging allows the recov-

ery and recycling of materials. Reuse of

materials helps prevent environmental

polluon and reduces the demand for raw

materials.

Local authories, retailers and collecon

organisaons may provide for separate

collecon of electrical products, baeries

and packaging.

 Safely dispose of the old plug.

 Connect the brown lead to the live

terminal “L” in the new plug.

 Connect the blue lead to the neutral

“N” terminal.

12

Contact details

Andrew James UK LTD

Unit 1

P C Henderson Premises

Bowburn North Industrial Estate

Bowburn

Co Durham

DH6 5NG

Customer Service / Technical Support

Telephone: 0844 335 8464

Email: customerservices@andrewjamesworldwide.com

Web: www.andrewjamesworldwide.com

Twier: @andrewjamesltd

Facebook: Andrew James

Copyright Andrew James

Pour la version française de ce noce veuillez visiter notre site:

www.andrewjamesworldwide.com

Bie nden Sie die deutsche Version dieser Bedienungsanleitung auf unserer

www.andrewjamesworldwide.com

AJ000681 / AJ000682

09/2016

Andrew James AJ000681 User manual

This manual is also suitable for

Andrew James AJ000681 User manual

Related papers

Other documents