Lexmark X125 Quick Start

Brand: Lexmark

Model: X125

Type: Quick Start

This manual is also suitable for

Lexmark X125: Your compact All-In-One printing solution for home or office. Print, copy, scan, and fax with ease using this versatile device. Enjoy crisp and clear text and graphics with its high-quality inkjet printing technology. Stay connected with its built-in fax modem and easily manage tasks with its intuitive control panel. The Lexmark X125 is your reliable companion for all your document needs.

Lexmark X125: Your compact All-In-One printing solution for home or office. Print, copy, scan, and fax with ease using this versatile device. Enjoy crisp and clear text and graphics with its high-quality inkjet printing technology. Stay connected with its built-in fax modem and easily manage tasks with its intuitive control panel. The Lexmark X125 is your reliable companion for all your document needs.

Attach and extend the document exit tray.

Load plain inkjet paper.

Before you begin, read the safety information on the back of this sheet.

Connect the power cord.

1

2

3

4

5

6

www.lexmark.com

Extend the paper exit tray and the paper support.

Open the cartridge access doors.

7

Remove the sticker and

tape.

1

2

X125 All-In-One

Install the cartridges.

Enter the best values from the alignment

page.

9

1

0

11

8

Wait for the alignment page to print.

Connect the telephone cord.

1

3

• If you are using your All-In-One with

your computer, continue to the next

step.

• If you are using your All-In-One

without a computer, you are finished.

1

2

Close the cartridge access doors.

Extend the document support.

Connect the USB cable.

1

4

Insert the CD.Click Cancel.

1

5

1

6

Click Next. Follow the steps on your computer to install:

• Printer software, Quick Reference, and User’s Guide

• Photo editing software

• OCR scanning software

Setup questions?

Checking first things first

If your All-In-One has a problem, first make sure:

• The power cord is plugged into your All-In-One and into a properly grounded electrical

outlet.

• Your telephone cord is securely attached to the line jack on your All-In-One and to the wall

jack.

• Your telephone has a dial tone.

• The cartridge access doors are both completely closed.

• Ready appears on the display.

• The sticker and transparent tape covering the bottom of the cartridges are removed.

When I inserted the installation software CD, nothing happened.

1 Close all open programs.

2 Restart your computer.

3 Make sure you click Cancel on any screens similar to the one in step 15 on the setup

sheet.

4 Eject, and then reinsert the installation software CD.

5 From your desktop, double-click My Computer.

6 Double-click your CD-ROM drive icon. If necessary, double-click setup.exe.

7 Continue with step 17 on the setup sheet.

Refer to the Quick Reference for other setup and safety information.

P/N 13H0080 EC 3H0024

© Copyright 2002 Lexmark International, Inc. All rights reserved.

Safety information

• CAUTION: Do not make any cabling connections

during a lightning storm.

• Connect the power cord to properly grounded

electrical outlet that is near the product and easily

accessible.

1
2
3
4

Lexmark X125 Quick Start

Brand: Lexmark

Model: X125

Type: Quick Start

This manual is also suitable for

Lexmark X125: Your compact All-In-One printing solution for home or office. Print, copy, scan, and fax with ease using this versatile device. Enjoy crisp and clear text and graphics with its high-quality inkjet printing technology. Stay connected with its built-in fax modem and easily manage tasks with its intuitive control panel. The Lexmark X125 is your reliable companion for all your document needs.

Related papers

Other documents