Grandstream GAC2500 Quick Installation Guide

GAC2500 Enterprise Conference Phone

Quick Installation Guide

Grandstream Networks, Inc.

126 Brookline Ave, 3rd Floor

Boston, MA 02215. USA

Tel : +1 (617) 566 - 9300

Fax: +1 (617) 249 - 1987

www.grandstream.com

For Warranty and RMA information, please visit www.grandstream.com

*Android is a Registered Trademark of Google, Inc.

Content

English..............................................................................1

简体中文..........................................................................7

Español............................................................................13

Français...........................................................................19

Deutsch...........................................................................25

Italiano............................................................................31

Русскй.............................................................................37

Português........................................................................43

1 2

The GAC2500 is not pre-congured to support or

carry emergency calls to any type of hospital, law

enforcement agency, medical care unit (“Emergency

Service(s)”) or any other kind of Emergency Service.

You must make additional arrangements to access

Emergency Services. It is your responsibility to pur-

chase SIP-compliant Internet telephone service, prop-

erly congure the GAC2500 to use that service, and

periodically test your conguration to conrm that it

works as you expect. If you do not do so, it is your re-

sponsibility to purchase traditional wireless or landline

telephone services to access Emergency Services.

GRANDSTREAM DOES NOT PROVIDE CON-

NECTIONS TO EMERGENCY SERVICES VIA THE

GAC2500. NEITHER GRANDSTREAM NOR ITS

OFFICERS, EMPLOYEES OR AFFILIATES MAY

BE HELD LIABLE FOR ANY CLAIM, DAMAGE, OR

LOSS. YOU HEREBY WAIVE ANY AND ALL SUCH

CLAIMS OR CAUSES OF ACTION ARISING FROM

OR RELATING TO YOUR INABILITY TO USE THE

GAC2500 TO CONTACT EMERGENCY SERVICES,

AND YOUR FAILURE TO MAKE ADDITIONAL AR-

RANGEMENTS TO ACCESS EMERGENCY SER-

VICES IN ACCORDANCE WITH THE IMMEDIATELY

PRECEDING PARAGRAPH.

PACKAGE CONTENTS:

EN

PRECAUTIONS:

WARNING: Please DO NOT power cycle the GAC2500 during phone boots

up or rmware upgrades. You may corrupt rmware images and cause the unit to

malfunction.

WARNING: Use the only power adapter included in the GAC2500 package.

Using an alternative non-qualied power adapter may possibly damage the unit.

1 X GAC2500 Main

Case

1 X Ethernet Cable1 X Power Adapter

1 X Quick Installation Guide /

1 X GPL License

1 X Cascade Cable 1 X Micro USB Cable

OVERVIEW:

GAC2500 represents the future in enterprise conference phone featuring a 4.3”

capacitive screen, a Gigabit network port, 3 microphones, a Micro-USB port, a

3.5mm audio port and an RJ48 cascade port, PoE, Wi-Fi and Bluetooth. The

GAC2500 supports 6 lines/6 SIP accounts, 7-way HD audio conferencing. The

GAC2500 delivers superior HD audio, leading edge telephony features, advanced

security and privacy protection, and provisioning. The GAC2500 is compatible with

plenty of third party SIP devices and major SIP/NGN/IMS platforms.

3 4

CONNECTING THE GAC2500:

Cascade

Port

Ethernet

Port

Power

Option B:

RJ45 Ethernet

cable to power

over Ethernet

(PoE) switch.

Option A:

12V DC output

adapter to an

eletric outlet.

Caution: Please only use either Option A or Option B for power supply.

CONNECTION CONFIGURATION:

GAC2500 provides 2 connection congurations:

1. Standard connection (extendable cascade connection and mobile device con-

nection).

2. Integrated connection (slave mode connection).

Caution: The 2 connections cannot be congured at the same time. If the micro-

USB port is connected to GVC32xx products or PC, GAC2500 will use integrated

connection for microphone audio capture and the speaker.

STANDARD CONNECTION:

1. Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or a

router.

2. Connect the 12V DC output plug to the power jack on the phone; plug the

power adapter into an electrical outlet. If PoE switch is used in step 1, this step

could be skipped.

3. The LCD will display booting up or rmware upgrading information. Before

continuing, please wait for the main screen display to show up.

4. On the web conguration interface or from the menu of the touch screen, you

can further congure network connection using static IP, DHCP and etc.

INTEGRATED CONNECTION:

1. Connect the 12V DC to the power jack on the phone; plug the power adapter

into an electrical outlet.

2. After the device boots up, connect the Micro-USB port to the USB port of

GVC32xx or PC, as shown above.

E

Cascade

Port

LAN Port Power

Micro-USB Port

3.5mm Audio

Port

Cascade connection:

GAC2500 A uses stan-

dard connection and

GAC2500 B connects A

with a cascade cable.

Integrated connec-

tion:

GAC2500 connects

to GVC32xx with a

Micro-USB cable.

Mobile device con-

nection:

GAC2500 (standard

connection) connects

to mobile device with

a 3.5mm male to

male cable.

12V

5 6

Conguring the GAC2500 Using Touch Screen:

1. Ensure the device is properly powered up and connected to the Internet using

standard connection.

2. The IP address of the phone will be shown up on the LCD.

3. Type the phone’s IP address in your PC’s browser (under the same LAN).

4. In the login page shown below, the default username and password for admin-

istrator are “admin” and “admin”. The default username and password for user are

“user” and “123”.

1. Make sure the device is properly powered up using standard connection and

in idle screen.

2. Select Settings -> Advanced Settings -> Account. Tap on one of the Accounts

to congure Account name, SIP Server, SIP User ID, SIP Auth ID, SIP Auth Pass-

word to register account on the GAC2500.

3. Once successfully registered, the main screen will be shown as below.

4. Please refer to the user manual for more conguration such as conguring the

static IP address.

5. Please contact your ITSP (Internet Telephony Service Provider) for additional

settings that may be necessary to congure the phone.

DEVICE CONFIGURATION:

Conguring the GAC2500 Using Web Browser:

Note: For the detailed user manual, please download from:

http://www.grandstream.com/support

This product is covered by one or more of the U.S. patents (and any foreign pat-

ent counterparts thereto) identied at www.cmspatents.com.

3. The LCD will display the cascade connection interface, as shown below.

4. Adjust the conference settings by tapping the icons on the interface.

5. In the web GUI, select “Account” to congure Account name, SIP Server, SIP

User ID, Authenticate ID and Authenticate Password to register the account on

the device.

6. For conguring the network, select “Maintenance” --> “Network”. Please contact

your ITSP (Internet Telephony Service Provider) for additional settings that may be

necessary to congure the phone.

Page is loading ...

Grandstream GAC2500 Quick Installation Guide

Grandstream GAC2500 Quick Installation Guide

in other languages

Related papers

Other documents