Grandstream GAC2500 Quick Installation Guide

Type
Quick Installation Guide
GAC2500 Enterprise Conference Phone
Quick Installation Guide
Grandstream Networks, Inc.
126 Brookline Ave, 3rd Floor
Boston, MA 02215. USA
Tel : +1 (617) 566 - 9300
Fax: +1 (617) 249 - 1987
www.grandstream.com
For Warranty and RMA information, please visit www.grandstream.com
*Android is a Registered Trademark of Google, Inc.
Content
English..............................................................................1
简体中文..........................................................................7
Español............................................................................13
Français...........................................................................19
Deutsch...........................................................................25
Italiano............................................................................31
Русскй.............................................................................37
Português........................................................................43
1 2
The GAC2500 is not pre-congured to support or
carry emergency calls to any type of hospital, law
enforcement agency, medical care unit (“Emergency
Service(s)”) or any other kind of Emergency Service.
You must make additional arrangements to access
Emergency Services. It is your responsibility to pur-
chase SIP-compliant Internet telephone service, prop-
erly congure the GAC2500 to use that service, and
periodically test your conguration to conrm that it
works as you expect. If you do not do so, it is your re-
sponsibility to purchase traditional wireless or landline
telephone services to access Emergency Services.
GRANDSTREAM DOES NOT PROVIDE CON-
NECTIONS TO EMERGENCY SERVICES VIA THE
GAC2500. NEITHER GRANDSTREAM NOR ITS
OFFICERS, EMPLOYEES OR AFFILIATES MAY
BE HELD LIABLE FOR ANY CLAIM, DAMAGE, OR
LOSS. YOU HEREBY WAIVE ANY AND ALL SUCH
CLAIMS OR CAUSES OF ACTION ARISING FROM
OR RELATING TO YOUR INABILITY TO USE THE
GAC2500 TO CONTACT EMERGENCY SERVICES,
AND YOUR FAILURE TO MAKE ADDITIONAL AR-
RANGEMENTS TO ACCESS EMERGENCY SER-
VICES IN ACCORDANCE WITH THE IMMEDIATELY
PRECEDING PARAGRAPH.
PACKAGE CONTENTS:
EN
PRECAUTIONS:
WARNING: Please DO NOT power cycle the GAC2500 during phone boots
up or rmware upgrades. You may corrupt rmware images and cause the unit to
malfunction.
WARNING: Use the only power adapter included in the GAC2500 package.
Using an alternative non-qualied power adapter may possibly damage the unit.
1 X GAC2500 Main
Case
1 X Ethernet Cable1 X Power Adapter
1 X Quick Installation Guide /
1 X GPL License
1 X Cascade Cable 1 X Micro USB Cable
OVERVIEW:
GAC2500 represents the future in enterprise conference phone featuring a 4.3”
capacitive screen, a Gigabit network port, 3 microphones, a Micro-USB port, a
3.5mm audio port and an RJ48 cascade port, PoE, Wi-Fi and Bluetooth. The
GAC2500 supports 6 lines/6 SIP accounts, 7-way HD audio conferencing. The
GAC2500 delivers superior HD audio, leading edge telephony features, advanced
security and privacy protection, and provisioning. The GAC2500 is compatible with
plenty of third party SIP devices and major SIP/NGN/IMS platforms.
3 4
CONNECTING THE GAC2500:
Cascade
Port
Ethernet
Port
Power
Option B:
RJ45 Ethernet
cable to power
over Ethernet
(PoE) switch.
Option A:
12V DC output
adapter to an
eletric outlet.
Caution: Please only use either Option A or Option B for power supply.
CONNECTION CONFIGURATION:
GAC2500 provides 2 connection congurations:
1. Standard connection (extendable cascade connection and mobile device con-
nection).
2. Integrated connection (slave mode connection).
Caution: The 2 connections cannot be congured at the same time. If the micro-
USB port is connected to GVC32xx products or PC, GAC2500 will use integrated
connection for microphone audio capture and the speaker.
STANDARD CONNECTION:
1. Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or a
router.
2. Connect the 12V DC output plug to the power jack on the phone; plug the
power adapter into an electrical outlet. If PoE switch is used in step 1, this step
could be skipped.
3. The LCD will display booting up or rmware upgrading information. Before
continuing, please wait for the main screen display to show up.
4. On the web conguration interface or from the menu of the touch screen, you
can further congure network connection using static IP, DHCP and etc.
INTEGRATED CONNECTION:
1. Connect the 12V DC to the power jack on the phone; plug the power adapter
into an electrical outlet.
2. After the device boots up, connect the Micro-USB port to the USB port of
GVC32xx or PC, as shown above.
E
E
Cascade
Port
LAN Port Power
Micro-USB Port
3.5mm Audio
Port
Cascade connection:
GAC2500 A uses stan-
dard connection and
GAC2500 B connects A
with a cascade cable.
Integrated connec-
tion:
GAC2500 connects
to GVC32xx with a
Micro-USB cable.
Mobile device con-
nection:
GAC2500 (standard
connection) connects
to mobile device with
a 3.5mm male to
male cable.
12V
5 6
Conguring the GAC2500 Using Touch Screen:
1. Ensure the device is properly powered up and connected to the Internet using
standard connection.
2. The IP address of the phone will be shown up on the LCD.
3. Type the phone’s IP address in your PC’s browser (under the same LAN).
4. In the login page shown below, the default username and password for admin-
istrator are “admin” and “admin”. The default username and password for user are
“user” and “123”.
1. Make sure the device is properly powered up using standard connection and
in idle screen.
2. Select Settings -> Advanced Settings -> Account. Tap on one of the Accounts
to congure Account name, SIP Server, SIP User ID, SIP Auth ID, SIP Auth Pass-
word to register account on the GAC2500.
3. Once successfully registered, the main screen will be shown as below.
4. Please refer to the user manual for more conguration such as conguring the
static IP address.
5. Please contact your ITSP (Internet Telephony Service Provider) for additional
settings that may be necessary to congure the phone.
DEVICE CONFIGURATION:
Conguring the GAC2500 Using Web Browser:
Note: For the detailed user manual, please download from:
http://www.grandstream.com/support
This product is covered by one or more of the U.S. patents (and any foreign pat-
ent counterparts thereto) identied at www.cmspatents.com.
3. The LCD will display the cascade connection interface, as shown below.
4. Adjust the conference settings by tapping the icons on the interface.
5. In the web GUI, select “Account” to congure Account name, SIP Server, SIP
User ID, Authenticate ID and Authenticate Password to register the account on
the device.
6. For conguring the network, select “Maintenance” --> “Network”. Please contact
your ITSP (Internet Telephony Service Provider) for additional settings that may be
necessary to congure the phone.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26

Grandstream GAC2500 Quick Installation Guide

Type
Quick Installation Guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages