Haier HDW101WH User manual

Category
Dishwashers
Type
User manual

This manual is also suitable for

Haier HDW101WH:

  • Efficiently cleans 12 standard place settings of dishes with various wash programs including Intensive, Normal, Rinse, Glasses, and Pre-wash.
  • Saves energy with its Economic wash mode, reducing power consumption.
  • Conveniently accommodates cutlery and other utensils with its dedicated cutlery basket and net for separating forks and knives.
  • Ensures sparkling dishes with its automatic detergent and rinse aid dispenser, preventing spots and streaks.
  • Offers peace of mind with its overflow protection function, preventing water damage.

Haier HDW101WH:

  • Efficiently cleans 12 standard place settings of dishes with various wash programs including Intensive, Normal, Rinse, Glasses, and Pre-wash.
  • Saves energy with its Economic wash mode, reducing power consumption.
  • Conveniently accommodates cutlery and other utensils with its dedicated cutlery basket and net for separating forks and knives.
  • Ensures sparkling dishes with its automatic detergent and rinse aid dispenser, preventing spots and streaks.
  • Offers peace of mind with its overflow protection function, preventing water damage.
HDW101**
Dishwasher
Service Manual
Models:
HDW101WH
HDW101SS
l
Features
l Two Stars for energy consumption of Autralian/New Zealand standard
l
Economic Washing
l Overflow Protection Function
l Net for separating forks or knives
l Super-capacity for 12 settings
Haier Group
Manual code:
0120502831/0120503010 Edition:2003.10.30
- 2 -
Contents
1. Product Code illumination and Series introduction …………..………….………...3
2. Features………………………………………………… ……………………………….4
3. Specifications…………………………………………… ……………………...…….5
4. Safety Precaution………………………………………… …………………….....8
5. Warning and Cautions………………………………… ……………………...……….10
6. Net Dimension…………………………………………………………………………...12
7. Installation and Accessory Parts…………………… …………………………………12
8. Parts and Functions………………………………… ………….. ……………….....15
9. Function Schedule……………………………………………………………………....18
10. Program Diagram………………………………………………………………………..19
11. Maintenances Service and Trouble Shooting……… ………………………………..20
12. Circuit Diagram……………………………… ………………………………….....23
13. Exploded View…………………………………… ……………………………………..24
14. List of Parts………………………………………… ……………………………………26
- 3 -
Product Code illumination and Series Introduction
1.Product Code Illurmination and Series Introduction
Model Identification
HDW 101 □□
A B C
A:
Abbreviation of Haier DishWasher
B:
Series of factory design
C:
Colour of dishwashers appearance WH: White SS: Stainless Steel BK: Black
Example:
HDW101WH
It represents automatic spraying electronic freestanding dishwasher,the cavity capacity is 12 standard
sets,with white steel outter side.
HDW101SS
It represents automatic spraying electronic freestanding dishwasher,the cavity capacity is 12 standard
sets,with stainless steel outter side.
- 4 -
Features / Specifications
2.Features
2.1 This product is provided with economic washing mode that users can select
optionally.
2.2 This product can contain 12 sets of eating utensils, applicable to big family.
2.3 Knife and fork can be separated by net and cleaned more easily
2.4 Detergent and rinse aid automatic dispenser is provided and can add them properly
that ensured the brightness and cleanness of eating utensils.
2.5 Water overflow protection is provided.
- 5 -
3.Specifications
DISH WASHER
Free
Last update 2003-10-30 2003-10-30
Revision 00.01 00.01
Supplier Type
N°.
HDW101WH/HDW101SS
Suppliers bar code N°.
EAN
Sales Brand / Model GXCH
Sales bar code N°.
EAN
1.
Key-features
Energy efficiency
Class
★★
Washing efficiency
Class
-
Drying efficiency
Class
-
Noise level power / pressure
dB(A)
55/-
Energy consumption*
kWh / y
387
kWh/24h
1.06
Water consumption*
l
15
Duration of programme (Based on 65° normal prog.) mins.
137
Place settings (international standard)
12
Programs
n°.
5
Programme selection single dial / electronic l/ -
Washing temperatures °C
50/60
Spray levels n°.
3
Certification's (CE / LGA / ISO 9001 / ISO 9002)
CE / ISO 9001
2.
Technical equipment
Work top / -removable
- /l
Decor frame / optional
l/l
Water heating element hidden / open
- /l
Refill spy-lamps salt / rinse aid
- /l
Program progress indicator LED / visual
- / -
Inner door
S
= stainless steel /
P
= plastic
S
Interior S= stainless steel / P= plastic
S
Dispenser system Detergent / Rinse aid
l/l
Water softening system / n°. of water hardness levels
l
/4
Electronically controlled water hardness
-
Easy clean filter system / self cleaning micro filter
l/-
Upper Basket Full load ajustable/Height adjustable
- /l
Lower Basket Folding/Not folding
- /l
Pates Rack On Upper Basket
-
Cuttlery Basket can be
separated for half wash /inseparated
- /l
Height adjustable top basket
l
Cuttlery sliding tray / removable basket
l/l
Plates sizes bottom basket / uper basket cm
19-26/14
Water inlet hose cold water / hot water
l
/-
Water drain hose / -hose support
l/l
- 6 -
Drying system Condenser / Turbo vented
Natural
Height adjustable feet n°. / max. mm
4/20
Delay timer (from - to) h
-
3.
Safety systems
Child resistant door lock CDL
-
Anti flood system AFS
l
Waterproof anti leak system ALS
l
Water return protection WRP
l
Acqua Stop kit
l
4.
Programs
Normal C° 60
Intensive C° 60
Economic C° -
Delicate or Light wash C° -
Rinse C° 60
Glasses C° 50
Rapid C°
Pre-wash (soak) C° Cold water
Strong C° -
5.
Additional program settings (optional function keys)
Half load
l
Economic
l50
Rapid
l
Delicate glasses -
Pots -
6.
Technical data
Voltage/frequency V/Hz
240V~/50Hz
Nominal power W
2200
Main fuse (intensity) A
13
7.
Product dimensions
Unit dimensions (H x W x D) cm
85X60X60
Depth with open door cm
116
Net weight kg
43
8.
Built-In
Requested measures of niche (H x W x D) cm
Dimensions of door panel (H x W) cm
9.
Packing .
Dimensions of packing (H x W x D) cm
88X66X67.5
Weight of packing (all materials) kg
48
10.
Informations for importer
14,5 m (84 CBM.) Truck load capacity pcs -
Jumbo (120 CBM.) Truck load capacity pcs -
40' Container load capacity pcs -
40' HC load capacity pcs
162
- 7 -
Max. failure rate (12 Months after sales to end customer) pc/% -
11.
Packing materials / Recycling symbols RS REzY
Carton (weight) g
4,600
Polistyren(weight) g
1,518
Polyetylenefoil (weight) g
65
Other packing materials (weight) g
55
Wood (weight) kg
0.15
12
Delivery Time of First Batch 10. 2003
- 8 -
Safety Precaution / Warning and cautions
4. Safety Precaution
- 9 -
Safety Precuation
- 10 -
5.Warning and cautions
1.Shelf(The container which dishes are put in is called shelf)
2.Put the shelf into the washing box
3.Put in detergent
4.End of cycle
- 11 -
Warning and Cautions
5.Weekly maintenance
-
- 12 -
Net dimension / Installations and Accessory Parts
6
.
Net dimension
7. Installations and Accessory Parts
7.1 Positioning the Appliance
Position the appliance in the desired location. The back should rest against the wall behind
it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water
supply and drain hoses that can be positioned on the right or the left to facilitate proper
installation.
7.2 Leveling the Appliance
Once the appliance is positioned, adjust the feet (screw them in or out) to adjust the
dishwasher, making it level. In any case, the appliance should not be inclined more than 2°.
If the appliance is level, it will help ensure proper performance.
- 13 -
Installation and Accessory Parts
7.3 Cold Water Connection
Connect the cold water supply hose to a threaded 3/4(gas) connector, inserting the small
filter supplied with the dishwasher and making sure that
it is fastened tightly in place (see Fig.1) If the water
pipes are new or have not been used for an extended
period of time, let the water run to make sure that the
water is clear and free of impurities. If this precaution is
not taken, there is a risk that the water inlet can get
blocked and damage the appliance.
7.4 Hot Water Connection
The water supply to the appliance can also be connected to the
house's hot water line (centralised system, heating system), as long as it does not exceed a
temperature of 60 . In this case, the wash cycle time will be shortened by about 15
minutes and the wash efficiency slightly reduced.
7.5 Drain Hose Connection
Insert the drain hose into a drain pipe with a minimum diameter of 4cm,or let it run into the
sink, making sure to avoid bending or crimping it. Use the special plastic support that comes
with the appliance (see Fig.2). The free end of the hose must be at a height between 40 and
100 cm and must not be immersed in water.
7.6Electrical Connection
After making sure that the voltage and frequency values for the current in the home
correspond to those on the rating plate (located on the stainless steel inner door of the
appliance) and that the electrical system is correct for the maximum voltage on the rating
plate, insert the plug into an electrical socket which is earthed properly (the earthing of the
appliance is a safety requirement mandated by law). If the electrical socket to which the
appliance must be connected is not appropriate for the plug, replace the plug ,rather than
using adpators or the like as they could cause overheating and burns.
- 14 -
Parts and Functions
8. Parts and functions
- 15 -
Parts and functions
Detergent
Detergent specifically intended for use with dishwashers must be used.The dispenser must
be refilled before the start of each wash cycle following the instructions provided in the
"Wash Cycle Table." The detergent dispenser is located on the inside panel the door.
Loading the detergent
To open the "A" cover on the dispenser,press the "B" button.The detergent for the wash
cycle should be poured into the "C" compartment.
After the detergent has been placed in the dispenser, close the cover and press down until it
clicks in place.
Notice:To facilitate closing the cover, remove any e
xcess detergent on the edges of the dispenser.
Rinse Aid
This product makes dishes sparkle and
helps them to dry without spotting.The
dispenser is located on the inside panel of
the door and should be filled after every
80 wash cycle (or when the rinse aid
indicator light comes on for those models
with this feature).
Loading the Rinse Aid
To open the dispenser,turn the "C" cap in the anti-clockwise direction and then pour in the
rinse aid,making sure not to overfill.The amount of rinse aid used for each cycle can be
regulated by turning the "F" dose adjustor ,located beneath the "C" cap, with a
screwdriver.There are 6 different settings; the normal dosage setting is 3.
Important
Proper dosage of the rinse aid improves
drying.
If drops of water remain on the dishes or
spotting occurs,the dosage adjustor should
be turned to a higher setting.
If the dishes have white streaks,turn the
dosage adjustor to a lower setting.
- 16 -
Parts and functions
- 17 -
Function Schedule
9. Function Schedule
1
Intensive wash
2
Normal wash
3
Rinse wash
4Glasses wash
5
Pre-wash(soak)
6
Intensive wash and economic button
7
Normal wash and economic button
8Rinse wash and economic button
9
Glasses wash and economic button
10Glasses wash and rapid button and economic button
Pre-wash
60Main-wash
Hot rinse
Hot rinse
Drying
Cold rinse
Pre-wash
60Main-wash
Rinse with cold water
Rinse with hot water at 70
Pre-wash
60
Main-wash
Hot rinse
Drying
Pre-wash
50Main-wash
Hot rinse
Hot rinse
Drying
Pre-wash
50Main-wash
Hot rinse
Drying
Pre-wash
50Main-wash
Hot rinse
Drying
50
Main-wash 23min
Cold rinse 5min
Drying
Dry
ing
Drying
- 18 -
Program Diagram
10. Program Diagram
- 19 -
Cable or program
controller
is
broken
Dismantle the door case and using
avometer to measure if
the two
terminals of door switch is on.
Open the door and check
if door flap is OK
Maintenances Services and Trouble Shooting
11. Maintenances Services and Trouble Shooting
11.1 Maintenances Services
It may occur that the dishwasher does not function or does not function properly Before
calling for assistance,Iet us see what can be done first :have you forgotten to press one of
the buttons or to perfom an essential operation?
11.2 Trouble Shooting
analysis of the common breakdowns
Door switch trouble
Phenomenon: the dishwasher does not work
N
Y
N
N
Y
N
Y
Whether door is closed Close the door
change the door flap
Change the door switch
- 20 -
Whether water level
switch is ok
Check whether
the
water intake veloscity is
too slow
Whet
her solenoid valve
is working
Cable or the pr
ogram
controller is broken
Maintenances Services and Trouble Shooting
analysis of the common breakdowns
Water supply trouble
Phenomenon: water level cannot reach the required location
N
Y
N
Y
Y
Y
N
N
Y
measure whether solenoid valve
is electrified
Change the solenoid valve
Whether water is flowing in the hose
Whether the stopcock is turned on
Turn on the stopcock
Change water level switch
users water pressure is too
slow
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38

Haier HDW101WH User manual

Category
Dishwashers
Type
User manual
This manual is also suitable for

Haier HDW101WH:

  • Efficiently cleans 12 standard place settings of dishes with various wash programs including Intensive, Normal, Rinse, Glasses, and Pre-wash.
  • Saves energy with its Economic wash mode, reducing power consumption.
  • Conveniently accommodates cutlery and other utensils with its dedicated cutlery basket and net for separating forks and knives.
  • Ensures sparkling dishes with its automatic detergent and rinse aid dispenser, preventing spots and streaks.
  • Offers peace of mind with its overflow protection function, preventing water damage.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI