Grandin LV32W10 Operating Instructions Manual

Category
LCD TVs
Type
Operating Instructions Manual
GRANDIN
MODE D'EMPLOI
OPERATING INSTRUCTIONS
LV32W10
TELEVISEUR COULEUR A TELECOMMANDE
COLOUR TELEVISION WITH REMOTE CONTROL
English - 38 -
Contents
Features .................................................................39
Introduction .............................................................39
Accessories ............................................................39
Preparation .............................................................39
Safety Precautions .................................................39
Power Source .....................................................39
Power Cord .........................................................39
Moisture and Water ............................................40
Cleaning .............................................................40
Heat and Flames ................................................40
Lightning .............................................................40
Replacement Parts .............................................40
Servicing .............................................................40
Waste Disposal ...................................................40
Information for Users in European Union
Countries ............................................................40
Disconnecting the Device ...................................40
Headphone Volume ............................................40
Installation ..........................................................40
LCD Screen ........................................................40
Warning ..............................................................40
Inserting Batteries in the Remote Control Handset 41
Switching the TV On/Off .........................................41
To Switch the TV On ...........................................41
To Switch the TV Off ...........................................41
Overview of the Remote Control ............................42
LCD TV and Operating Buttons ..............................43
Viewing the Connections- Back Connectors ..........43
Viewing the Connections - Side Connectors ..........45
Power Connection ..................................................45
Aerial Connection ...................................................45
Using Digital Multimedia Connectors......................46
USB Memory Connection ...................................46
Connecting the LCD TV to a PC .............................46
Connecting to a DVD Player...................................47
Using Side AV Connectors .....................................47
Connecting Other Equipment via Scart ..................47
Input Selection ........................................................48
Basic Operations ....................................................48
Operation with the Buttons on the TV .................48
Operation with the Remote Control ....................48
Initial Settings .........................................................48
General Operation ..................................................49
Electronic Programme Guide (EPG) ..................50
Programme Options ...........................................50
Analogue Teletext ...............................................50
Widescreen .........................................................51
IDTV Menu System ................................................51
Channel List ........................................................51
Navigating the Entire Channel List .....................51
Moving the channels in the channel list ..............51
Deleting the Channels in the Channel List .........51
Renaming channels ............................................51
Adding Locks to Channels ..................................52
Setting Favourites ...............................................52
Program Guide ...................................................52
Timers .................................................................52
Common Interface .............................................53
TV Setup .............................................................53
Setup ..................................................................53
Con guration ......................................................53
Time Settings(**) .................................................54
Language Settings ..............................................55
Language Settings ..............................................55
Installation ..........................................................56
Media Browser (in DTV mode) ...........................57
Video Playback (optional) ...................................58
Analogue TV Menu System ....................................58
Picture Menu ......................................................58
Sound Menu .......................................................59
Feature Menu .....................................................61
Install Menu ........................................................62
Source Menu ......................................................64
PC Mode Menu System..........................................64
PC Position Menu ...............................................64
Displaying TV Information ......................................64
Mute Function .........................................................65
PIP (Picture-in-Picture) and PAP (Picture-and-
Picture) Modes .......................................................65
Picture Mode Selection...........................................65
Freezing Picture .....................................................65
Zoom Modes...........................................................65
Auto ....................................................................65
16:9 .....................................................................65
4:3 .......................................................................65
Panoramic ..........................................................65
14:9 .....................................................................66
Cinema ...............................................................66
Subtitle ................................................................66
Zoom ..................................................................66
Teletext ...................................................................66
Tips .........................................................................67
Screen Care .......................................................67
Image Persistence ..............................................67
No Power ............................................................67
Poor Picture ........................................................67
No Picture ...........................................................67
Sound .................................................................67
Remote Control ..................................................67
Input Sources .....................................................67
Appendix A: PC Input Typical Display Modes .........68
Appendix B: AV and HDMI Signal Compatibility (Input
Signal Types) ..........................................................69
Appendix C: PIP/PAP Mode Combinations ............70
Appendix D: Supported File Formats for USB Mode ..
71
Appendix E: Supported DVI Resolutions ................71
Speci cations .........................................................72
Digital Reception ....................................................72
02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32875W_1205UK_10064576_50158417.indd 38 29.10.2009 08:45:37
English - 39 -
Features
Remote controlled colour LCD TV.
Fully integrated digital TV (DVB-T - MPEG2) (DVB-T-
MPEG4).
DTV input supports 1920x1080i
HDMI connectors for digital video and audio. This
connection is also designed to accept high de nition
signals.
USB input.
200 programmes from VHF, UHF(analogue).
1000 programmes for digital mode (IDTV).
Integrated tuner TNT HD, MPEG 2 / MPEG 4
compatible.
OSD menu system.
Two scart sockets for external devices (such as
video, video games, audio set, etc.).
Stereo sound system. (German+Nicam)
Teletext, fastext, TOP text.
Headphone connection.
Automatic programming system.
Forward or backward manual tuning.
Automatic sound mute when no transmission.
NTSC playback.
PIP / PAP / PAT functions.
AVL (Automatic Volume Limiting).
When no valid signal is detected, after 5 minutes the
TV switches itself automatically to standby mode.
PLL (Frequency Search).
PC input.
Plug&Play for Windows 98, ME, 2000, XP, Vista.
Audio line out.
Game Mode (optional)
Active antenna power (optional)
Movie Sense. (optional)
Introduction
Thank you for choosing this product. This manual will
guide you for the proper operation of your
TV. Before operating the TV, please read
this manual thoroughly.
Please do keep this manual in a safe place
for future references.
Accessories
Remote
Controller
Instruction Book
Preparation
For ventilation, leave a free space of at least 10 cm all
around the set. To prevent any fault and unsafe situations,
please do not place any objects on top of the set.
Use this device in moderate climates.
Safety Precautions
Please read the following recommended safety
precautions carefully for your safety.
Power Source
The TV set should be operated only from a 220-240
V AC, 50 Hz outlet. Ensure that you select the correct
voltage setting for your convenience.
Power Cord
Do not place the set, a piece of furniture, etc. on the
power cord (mains lead) or pinch the cord. Handle the
power cord by the plug. Do not unplug the appliance
by pulling from the power cord and never touch the
power cord with wet hands as this could cause a short
circuit or electric shock. Never make a knot in the cord
02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32875W_1205UK_10064576_50158417.indd 39 29.10.2009 08:45:37
English - 40 -
or tie it with other cords. The power cords should be
placed in such a way that they are not likely to be
stepped on. A damaged power cord can cause re or
give you an electric shock. When it is damaged and
needs to be replaced, it should be done by quali ed
personnel.
Moisture and Water
Do not use this device in a humid and
damp place (avoid the bathroom, the
sink in the kitchen, and near the washing
machine). Do not expose this device to
rain or water, as this may be dangerous
and do not place objects lled with liquids,
such as ower vases, on top. Avoid from
dripping or splashing.
If any solid object or liquid falls into the cabinet, unplug
the TV and have it checked by quali ed personnel
before operating it any further.
Cleaning
Before cleaning, unplug the TV set
from the wall outlet. Do not use liquid or
aerosol cleaners. Use soft and dry cloth.
Ventilation
The slots and openings on the TV set are intended for
ventilation and to ensure reliable operation. To prevent
overheating, these openings must not be blocked or
covered in anyway.
Heat and Flames
The set should not be placed near to open
ames and sources of intense heat such
as an electric heater. Ensure that no open
ame sources, such as lighted candles,
are placed on top of the TV. Batteries
should not be exposed to excessive heat
such as sunshine, re or the like.
Lightning
In case of storm and lightning or when
going on holiday, disconnect the power
cord from the wall outlet.
Replacement Parts
When replacement parts are required, make sure that
the service technician has used replacement parts,
which are speci ed by the manufacturer or have the
same speci cations as the original one. Unauthorized
substitutions may result in re, electrical shock or
other hazards.
Servicing
Please refer all servicing to qualified
personnel. Do not remove the cover
yourself as this may result in an electric
shock.
Waste Disposal
Instructions for waste disposal:
Packaging and packaging aids are recyclable and
should principally be recycled. Packaging materials,
such as foil bag, must be kept away from children.
Batteries, including those which are heavy metal-
free, should not be disposed of with household
waste. Please dispose of used battery in an
environment friendly manner. Find out about the
legal regulations which apply in your area.
Cold cathode fluorescent lamp in LCD PANEL
contains a small amount of mercury; please follow
the local laws or regulations for disposal.
Information for Users in European
Union Countries
This symbol on the product or on its
packaging means that your electrical
and electronic device should be
disposed at the end of its service
life separately from your household
wastes. There are separate collection
systems for recycling in EU.
For more information, please contact
the local authority or the dealer where you purchased
the product.
Disconnecting the Device
The mains plug is used to disconnect TV set from
the mains and therefore it must remain readily
operable.
Headphone Volume
Excessive sound pressure from earphones
and headphones can cause hearing loss.
Installation
To prevent injury, this device must be securely
attached to the wall in accordance with the installation
instructions when mounted to the wall (if the option
is available).
LCD Screen
The LCD panel is a very high technology product with
about a million thin lm transistors, giving you ne
picture details. Occasionally, a few non-active pixels
may appear on the screen as a xed blue, green or
red point. Please note that this does not affect the
performance of your product.
Warning
Do not leave your TV in standby or operating mode
when you leave your house.
02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32875W_1205UK_10064576_50158417.indd 40 29.10.2009 08:45:38
English - 41 -
Inserting Batteries in the
Remote Control Handset
Remove the battery cover located on the back of
the handset by gently pulling backwards from the
indicated part.
Insert two AAA/R3 or equivalent type batteries
inside. Place the batteries in the right directions and
replace the battery cover.
Note : Remove the battery from remote control handset when
it is not to be used for a long period. Otherwise it can be
damaged due to any leakage of batteries.
Remote range is approximately 7m/23ft.
Switching the TV On/Off
To Switch the TV On
Connect the power cord to the 220-240V AC, 50
Hz.
Press switch. Then the standby LED lights
up.
To switch on the TV from standby mode either:
Press the button, P+ / P- or a numeric button
on the remote control.
Press the -P/CH or P/CH+ button on the TV. The TV
will then switch on.
Note : If you switch on your TV via PROGRAMME UP/DOWN
buttons on the remote control or on the TV set, the programme
that you were watching last will be reselected.
By either method the TV will switch on.
To Switch the TV Off
Press the button on the remote control or press
the switch, so the TV will switch to standby
mode.
To power down the TV completely, unplug the
power cord from the mains socket.
Note: When the TV is switched to standby mode,
standby LED can blink to indicate that features such
as Standby Search, Over Air Download or Timer is
active.
02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32875W_1205UK_10064576_50158417.indd 41 29.10.2009 08:45:39
English - 42 -
Overview of the Remote Control
Standby1.
Yellow (Audio language (in DTV mode) (*) 2.
/ Feature menu)
Blue (Favourite mode (in DTV mode) (*) / 3.
Install menu)
Previous programme / Swap4.
Cursor up5.
Cursor right6.
Cursor down7.
TV / Digital TV8.
Mono/Stereo - Dual I-II 9.
Programme up/down10.
Numeric buttons11.
Exit (in DTV mode)12.
Hold (in TXT mode) / PIP position13.
Update (in TXT mode) / PAP mode 14.
Index page (in TXT mode) / Electronic 15.
Programme Guide (EPG) (in DTV mode)
Reveal (in TXT mode) / Switch from TV to 16.
PC
Green (Picture menu / Page down / 17.
Subtitle onoff (in DTV mode) (*))
Red (Sound menu / Page up / Channel list 18.
(*) (in DTV mode))
Menu on/off19.
Ok - Con rm20.
Cursor Left21.
AV / Source22.
Info23.
Volume up/down24.
Mute25.
Picture mode selection26.
Time / Subpage (in TXT mode) / Subtitle 27.
on-off (**)
Teletext on-off28.
Mix (in TXT mode) / PIP mode29.
Expand (in TXT mode) / Image size30.
(*) available for EU countries.
(**) available for UK country option.
02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32875W_1205UK_10064576_50158417.indd 42 29.10.2009 08:45:40
English - 43 -
LCD TV and Operating Buttons
FRONT and REAR VIEW SIDE VIEW Control Buttons
Standby button1.
TV/AV button2.
Programme Up/Down 3.
buttons
Volume Up/Down buttons4.
Note: Press and
buttons at the same time to view
main menu.
Viewing the Connections- Back Connectors
1. Subwoofer Out is for connecting an external, active subwoofer to the set to give a much deeper bass
effect.
Use an appropriate RCA cable to connect the set to a subwoofer unit.
Audio Line Outs 2. output audio signals to an external device such as an optional sound system.
To connect the external speakers to your TV, use AUDIO LINE OUTS of the TV with an audio cable.
3. SCART 2 inputs or outputs for external devices.
02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32875W_1205UK_10064576_50158417.indd 43 29.10.2009 08:45:40
English - 44 -
4. SCART 1 inputs or outputs for external devices.
Connect the SCART cable between SCART sockets on TV and SCART socket on your external
device (such as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the SCART sockets, the TV will automatically switch to
AV mode. If both sockets are employed at the same time, SCART 1 will override SCART 2 unless
manually selected.
Note: You should connect the decoder to EXT-1, if you are planning to watch a scrambled channel.
The decoder might not function properly if you do not connect the decoder to the Scart 1 (Ext-1) socket.
5. Component Video Inputs (YPbPr) are used for connecting component video.
You can connect the component video and audio sockets with a device that has component output.
Connect the component video cables between the COMPONENT VIDEO INPUTS on on the TV and
the component video outputs of your device. While connecting, be sure that the letters on your TV, Y ,
Pb , Pr correspond with your devices connectors.
6. PC/YPbPr Audio Inputs are used for connecting audio signals of a PC or a device that connects to the
TV via YPbPr.
Connect the PC audio cable between the AUDIO INPUTS on the TV and audio output of your PC to
enable PC audio.
Connect the audio cable between AUDIO INPUTS on the TV and audio outputs of your device to
enable component audio.
7. S/PDIF Coaxial Out outputs digital audio signals of the currently watched source.
Use an SPDIF coaxial cable to transfer audio signals to a device that has S/PDIF input.
8. S/PDIF Digital Out outputs digital audio signals of the currently watched source.
Use a digital optic cable to transfer audio signals to a device that has S/PDIF input.
9. RF Input connects to an antenna or a cable.
Note that if you use a decoder or a media recorder, you should connect the aerial cable through the
device to the television with an appropriate antenna cable, as shown in the illustration in the following
pages.
10. PC Input is for connecting a personal computer to the TV set.
Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.
11. HDMI 2: HDMI Input
HDMI 1: HDMI Input12.
HDMI Inputs are for connecting a device that has an HDMI socket. Your LCD Television is capable of
displaying High De nition pictures from devices such as a High De nition Satellite Receiver or DVD
Player. These devices must be connected via the HDMI sockets or Component Socket. No sound
connection is needed for an HDMI to HDMI connection.
When you use the wall mount kit (optional) with the LCD TV, we would de nitely recommend to plug all your
cables into the back of the LCD before mounting to the wall.
02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32875W_1205UK_10064576_50158417.indd 44 29.10.2009 08:45:42
English - 45 -
Viewing the Connections - Side Connectors
CI Slot is used for inserting a CI card. A CI card allows you to view all 1.
the channels that you subscribe to. For more information, see Common
Interface” section.
Side USB input . 2.
Note: Codec update cannot be performed.
Headphone jack is used for connecting an external headphone to the 3.
system. Connect to the HEADPHONE jack to listen to the TV from
headphones (optional).
Video Input is used for connecting video signals of external devices. 4.
Connect the video cable between the VIDEO IN socket on the TV and the
VIDEO OUT jack on your device.
Audio Inputs are used for connecting audio signals of external devices. 5.
Connect the audio cable between the AUDIO INPUTS on the TV and the
AUDIO OUTPUT jacks on your device. Note: If you connect a device to
the TV via the VIDEO INPUT, you should also connect your device with
an audio cable to the AUDIO INPUTS of the TV to enable audio.
Power Connection
IMPORTANT : The TV set is designed to operate on 220-240V AC, 50 Hz.
After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
mains.
Plug the power cable to the mains socket outlet.
Aerial Connection
Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.
02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32875W_1205UK_10064576_50158417.indd 45 29.10.2009 08:45:42
English - 46 -
Using Digital Multimedia
Connectors
You can connect USB devices to your TV by using
the USB input of the TV. This feature allows you to
display/play JPG, video (optional) and MP3 les
stored in a USB stick.
It is possible that certain types of USB devices (e.g.
MP3 Players) may not be compatible with this TV.
You may back up your les before making any
connections to the TV set in order to avoid any
possible data loss. Note that manufacturer will not
be responsible for any le damage or data loss.
Do not pull out USB module while playing a le.
The TV supports only FAT32 disk formatting. NTFS
format is not supported. If you connect a USB disk
with NTFS format, “usb is unformatted” osd will
be displayed.
CAUTION: Quickly plugging and unplugging
USB devices, is a very hazardous operation.
Especially, do not repeatedly quickly plug
and unplug the drive. This may cause
physical damage to the USB player and
especially the USB device itself .
SIDE VIEW USB MEMORY
USB Memory Connection
Plug your USB device to the USB input of the TV.
IMPORTANT: The TV supports only FAT32 disk formatting.
NTFS format is not supported.
If the plugged USB disk is not recognised, please
reinsert the disk.
It is recommended that you connect your USB
device directly to the USB input of the TV. Some
compatibility problems may occur if you use a
separate cable connection.
Connecting the LCD TV to a PC
For displaying your computers screen image on
your LCD TV, you can connect your computer to the
TV set.
Power off both computer and display before making
any connections.
Use 15-pin D-sub display cable to connect a PC to
the LCD TV.
When the connection is made, switch to PC source.
See Input selection” section.
Set the resolution that suits your viewing requirements.
Resolution information can be found in the appendix
parts.
02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32875W_1205UK_10064576_50158417.indd 46 29.10.2009 08:45:44
English - 47 -
Connecting to a DVD Player
If you want to connect a DVD player to your LCD
TV, you can use connectors of the TV set. DVD
players may have different connectors. Please refer
to your DVD players instruction book for additional
information. Power off both the TV and the device
before making any connections.
Note: Cables shown in the illustration are not supplied.
If your DVD player has an HDMI socket, you can
connect via HDMI. When you connect to DVD player
as illustrated below, switch to HDMI source. See,
Input Selection” section.
Most DVD players are connected through
COMPONENT SOCKETS. Use a component video
cable to connect video input. For enabling audio, use
a component audio cable as illustrated below. When
the connection is made, switch to YPbPr source.
See, Input selection” section.
You may also connect through the SCART 1 or
SCART 2. Use a SCART cable as shown below.
Note : These three methods of connection perform the same
function but in different levels of quality. It is not necessary
to connect by all three methods.
Using Side AV Connectors
You can connect a range of optional equipment
to your LCD TV. Possible connections are shown
below. Note that cables shown in the illustration are
not supplied.
For connecting a camcorder, connect to the VIDEO
IN socket and the AUDIO SOCKETS. Do not connect
the camcoder to VIDEO IN socket at the same time
since it can cause noise in the picture. For selecting
the related source, see the section Input selection”
in the following parts.
To listen to the TV sound from headphones, connect
to the HEADPHONE jack of theTV.
Connecting Other Equipment
via Scart
Most devices support SCART connection. You can
connect a; DVD recorder, a VCR or a decoder to your
LCD TV by using the SCART sockets. Note that cables
shown in the illustration are not supplied.
Power off both the TV and the devices before making
any connections.
For more information, refer to your devices own
instruction book.
02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32875W_1205UK_10064576_50158417.indd 47 29.10.2009 08:45:45
English - 48 -
Input Selection
Once you have connected external systems to your
TV, you can switch to different input sources.
PressSOURCE button on your remote control for
directly changing sources.
or,
SelectSource option from the main menu
by using or button. Use then or
button to highlight an input and press button
to select.
Note : You can mark desired source options by pressing the
OK button. Therefore, when SOURCE button is pressed,
only the marked source options will be available (except for
the TV source).
Basic Operations
You can operate your TV using both the
remote control and onset buttons.
Operation with the Buttons on the TV
Volume Setting
Press button to decrease volume or
button to increase volume, so a volume level scale
(slider) will be displayed on the screen.
Programme Selection
Press P/CH + button to select the next programme or
P/CH - button to select the previous programme.
Viewing Main Menu
Press the M button to enter main menu. In the main
menu select sub-menu using P/CH - or P/CH +
buttons and enter the sub-menu using or
buttons. To learn the usage of the menus,
refer to the menu system sections.
AV Mode
Press the TV/AV button in the control panel on the
TV to switch between AV modes.
Operation with the Remote Control
The remote control of your TV is designed to control
all the functions of the model you selected. The
functions will be described in accordance with the
menu system of your TV.
Functions of the menu system are described in the
following sections.
Volume Setting
PressV+ button to increase the volume. PressV -
button to decrease the volume. A volume level scale
(slider) will be displayed on the screen.
Programme Selection (Previous or Next
Programme)
Press P - button to select the previous
programme.
Press P + button to select the next programme.
Programme Selection (Direct Access)
Press numeric buttons on the remote control to
select programmes between 0 and 9. The TV
will switch to the selected programme. To select
programmes between 10 - 1000 (for IDTV) or
10-199 (for analogue), press the numeric buttons
consecutively. Press directly the programme number
to reselect single digit programmes.
Initial Settings
When the TV is turned on for the rst time, the menu
for the language selection appears on the screen. The
messageWelcome please select your language!
is displayed in all language options sequentially in
the OSD.
By pressing the or buttons highlight the language
you want to set and press OK button.
You can get information about the menu usage by
pressing button. Press button again to exit
the help menu.
After then,First time installation OSD will appear
on the screen. By pressing or buttons, select
the country you want to set and press OK button.
Note: Country selection will not be available for UK. Press
OK to continue.
02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32875W_1205UK_10064576_50158417.indd 48 29.10.2009 08:45:46
English - 49 -
After then, the active antenna selection OSD appears
on the screen:
By pressing or buttons, set active antenna
mode as on or off.
If an active antenna is connected to your TV, you can
select this option as On. Antenna power should be
Off when standard antenna is used instead of the
active antenna. SeeCon guration Menu in the
following sections for more information.
Press OK button on the remote control to continue
and the following message will be displayed on the
screen:
To select the Yes” or No option, highlight the item
by using or buttons and press OK button.
The IDTV will automatically tune to the transmission
channels, searching for digital terrestrial TV broadcasts
and displaying the names of channels found. This
process will take a few minutes. To cancel searching,
you can press MENU button at any time during the
process. The following OSD will be displayed during
the automatic search:
After Automatic Search is completed, the following
message will be displayed, asking for sorting option.
If you select YES, programme list will be sorted
according to LCN (logical channel number). Select
NO for using frequency sort. (This feature is available
for only Germany,Austria and Italy country option).
After this operation, the following menu will appear on
the screen, asking for analog channel search:
To search for analogue channels, select Yes”. TV
switches to the analogue TV mode. A menu will be
displayed to search for analogue channels .
Set Language item by pressing or button.
Press or button to highlight Country item and
then use or to set. Press or button to
highlight TXT. Language. Set TXT Language by using
or button. To cancel, press the BLUE button.
When nished, press OK or RED button to continue
and the following OSD will be displayed:
After automatic tuning is nalized, a programme list
will appear on the screen. In the programme list you
will see the programme numbers and names assigned
to the programmes.
If you do not accept the locations and/or the names
of the programmes, you can change them in Program
table. For details, see the section, “Program table”.
General Operation
Pressing the DTV/USBbutton at any time while
watching television programmes will switch the TV
set to the digital terrestrial television broadcasting.
Information Banner
Whenever you change the channel using the P + or
P - button or numeric buttons, the TV displays the
broadcast picture along with an information banner
at the bottom of the screen. This will remain on the
screen for approximately a few seconds.
The information banner can also be displayed by
pressing the button at any time while watching
the TV. Pressing button again removes the
banner.
If the selected channel is locked, you must enter
the correct four digit key to view the channel. In this
case, a dialog box asking for the lock key will be
displayed:
02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32875W_1205UK_10064576_50158417.indd 49 29.10.2009 08:45:47
English - 50 -
Electronic Programme Guide (EPG)
Some, but not all, channels send information about
the current and next events. Please note that event
information is updated automatically. If there are no
event information data available for channels,EPG
will be displayed with blanks.
Press EPG button to view the EPG menu.
Press or buttons to navigate through
channels.
Press or buttons to navigate through the
programme list.
RED button (Shrink): makes the info boxes
smaller.
GREEN button (Expand): makes the info boxes
larger.
YELLOW button (Prev. Day): displays the
programmes of previous day.
BLUE button (Next day): displays the programmes
of the next day.
INFO (Details): displays the programmes in detail.
OK (View / Timer): shows the highlighted channel /
sets the reminder for future programmes.
Numeric buttons (Jump): go to preferred channel
directly via numeric buttons.
0 (SEARCH): activates Guide Search” window
Press “0” button to view Guide Search menu. Using
this feature, you can search the programme guide
database in accordance with the genre selected or
with name match.
Programme Options
In EPG menu, press the OK button to enter the
“Programme Options” menu.
Using this option, you can switch to the selected
channel.
Over Air Download
To ensure that your IDTV always has the most up-
to-date information, please ensure that, after use,
it is set to standby mode. At 3 A.M. each day, the
IDTV automatically searches for any updates which
may be broadcast and will download this to your
IDTV automatically. This operation will normally take
approximately 30 minutes.
Displaying Subtitles
With digital terrestrial broadcasting (DVB-T), some
programmes are broadcast with subtitles.
Note: You can enable subtitles by pressing the SUBTITLE
button.
Digital Teletext (For UK only**)
Press the TELETEXT ( ) button.
The digital teletext information appears.
Operate it with the coloured buttons, /// buttons and
OK button.
The operation method may differ depending on the
contents of the digital teletext.
Follow the instructions displayed on digital teletext
screen.
When “Press “SELECT” button or similar message
appears on the screen, press the OK button.
When the TELETEXT ( ) button is pressed, the
TV returns to television broadcasting.
With digital terrestrial broadcasting (DVB-T), in
addition to digital teletext broadcasting together with
the normal broadcasting, there are also channels
with just digital teletext broadcasting.
The aspect ratio (picture shape) when watching
a channel with just digital teletext broadcasting is
the same as the aspect ratio of the picture viewed
previously.
When you press the TELETEXT ( ) button again,
the digital teletext screen will be displayed.
Analogue Teletext
Use of teletext and its functions are identical to
the analogue text system. Please do refer to the
TELETEXT explanations.
02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32875W_1205UK_10064576_50158417.indd 50 29.10.2009 08:45:47
English - 51 -
Widescreen
Depending on the type of the broadcast being
transmitted, programmes can be viewed in a number
of formats. Press the SCREEN button repeatedly to
change screen format.
When Auto is selected, the format being displayed is
determined by the picture being broadcast.
PLEASE NOTE : Menu size changes depending on the
chosen image size.
IDTV Menu System
Press MENU button and DTV main menu will be
displayed.
Channel List
Using or buttons on the remote control in
main menu, make sure that the rst item, Channel
List, is highlighted and press the OK button to display
the Channel List.
You can use following buttons for Move, Delete and
Lock functions.
YELLOW: Tags/untags the selected channel.
BLUE: Tags/untags all channels.
Channel List is the place where the channels are
managed.
Navigating the Entire Channel List
Press or keys for selecting the previous or
next channel.
You can press or buttons to move page up or
page down.
To watch a speci c channel, highlight it using
or buttons and then press OK button, while the
“Select” item on Channel List menu is highlighted
via or buttons.
Moving the channels in the channel
list
Press or buttons to select the channel that
will be moved.
Press or buttons to select the Moveitem
on Channel List menu and press OK to con rm.
Note: If you enter the same programme number of the
channel that you want to move, “....services will be replaced.
Do you want to continue?” OSD will be displayed. Press
OK to con rm or select “No” to cancel.
Note: The following screen will be displayed when want to
move or delete channels that are sorted by LCN (logical
channel number) service.
Select “YES to continue. Select NO” to cancel (LCN feature
is available for only Germany, Austria, Switzerland and Italy
country options).
Deleting the Channels in the Channel
List
Press or buttons to select the channel that
will be deleted.
Press or buttons to select the Deleteitem
on Channel List OSD.
Press OK’ button to delete the highlighted channel
in the channel list. Then the message below appears
on the screen.
Renaming channels
To rename a speci c channel, the channel must be
highlighted via pressing or buttons and then
highlight the “Edit Name” item by pressing or
buttons. Press OK” button to activate rename
feature.
02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32875W_1205UK_10064576_50158417.indd 51 29.10.2009 08:45:48
English - 52 -
Now pressing or buttons moves to the previous/
next character. Pressing or buttons toggles the
current character, i.e., ‘b’ character becomes a’ on and
c’ on . Pressing the numeric buttons 0...9’ replaces the
highlighted character with the characters printed above
the key one by one as the button is pressed.
Press the MENU button to cancel the editing or OK
button to save the new name.
Adding Locks to Channels
Channel Locking provides a password-protected
access to channels selected by parents.
In order to lock a channel you should know the
Parental Lock password (default value is set to
0000 in the factory and can only be changed from the
Con guration menu).
By pressing or buttons, highlight the channel
to be locked and select the “Lockoption by pressing
or buttons. Then press the OK button and a
password box is displayed:
Setting Favourites
To set a favourite you should highlight the “Favourites”
item at the bottom of the Channel List menu. Then
press OK button and Edit Favourite List menu
appears on the screen.
Adding a Channel to a Favourites List
By pressing or buttons, highlight the channel
that you want to add to the favourite list. By pressing
OK button, the highlighted channel is added to
Favourite List. F icon indicates that a channel is added
to Favourite List.
Removing a Channel from a Favourite List
Highlight the channel that you want to remove from the
favourite list and press OK button to remove.You can
press OK button again to re-adding a channel.
To activate Favourites, go to the Con guration menu
and select Favourite mode. Use or to set
Favourite mode as on. To cancel Favourites, set
Favourite Mode to Off.
Hint: Pressing INFO button can help you for displaying
information in IDTV.
Program Guide
This section is same with the instructions given in
the General Operations page. Please see Electronic
Programme Guide (EPG) section in the General
Operations part.
Timers
To display timers window, press either TIME button
on the remote control or activate the item from the
main menu. To add a timer, press the YELLOW
button on the remote control. ThenAdd Timer
window appears.
Channel: or keys will navigate the user
through the TV or Radio list.
Date: Starting date is entered via the Left/Right or
the numeric buttons.
Start: Starting time is entered via the Left/Right or
the numeric buttons.
End: Ending time is entered via the Left/Right or the
numeric buttons.
Duration: Displays the duration of the recording.
Duration item will be automatically displayed after the
starting and ending times are entered.
Change / Delete: permits or prohibits any modi cations
for other users.
You can save the adjustments by pressing the GREEN
key or cancel the process by pressing the RED button.
You can edit the list via GREEN key and delete with
the RED button.
02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32875W_1205UK_10064576_50158417.indd 52 29.10.2009 08:45:48
English - 53 -
Common Interface
Press M button to display the main menu and use
the or buttons to highlight theCommon
Interface line and press OK button.
It is required to subscribe to a pay channel company
to view the pay channels of the Digital Terrestrial
broadcasting.
Obtain the Conditional Access Module (CAM) and
the viewing card by subscribing to a pay channel
company, then insert those to the Television using
the following procedure.
Switch off the TV and unplug from the mains.
Insert the CAM, and then the viewing card to the
slot.
The CAM should be correctly inserted, it is impossible
to insert fully if reversed. The CAM or the TV terminal
may be damaged if the CAM is forcefully inserted.
Connect the TV to the mains supply, switch on
and then wait for few moments until the card is
activated.
Some CAMs may require the following set up.
Please set the CAM by entering the DIGITAL TV
menu, Common Interface then pressing OK button.
(CAM set up menu is not displayed when it is not
required.)
To see the viewing contract information:
Enter DIGITAL TV; press MENU button, then highlight
Common Interface and press OK button.
When no module is inserted,No Common
Interface module detected message appears on
the screen.
Refer to the module instruction manual for details
of the settings.
NOTE: Insert or remove the CI module only when the TV is
in STANDBY mode or SWITCHED OFF.
TV Setup
You can use this item to display the TV functions.
The digital TV Setup menu screen is accessed from
the main menu. Press the MENU button to display
the main menu and use or buttons to highlightTV
Setup. Press OK button to display TV Setup menu
screen.
You can nd detailed information for all menu items
inAnalogue TV Menu System section.
Setup
The adjustments in this menu are given as the
following:
Con guration
You can con gure the settings of your TV. Select
Con guration from Setup menu and press OK to
view this menu. Press the RETURN button on the
remote control to exit.
Favourite Mode
Use this function to enable or disable favourite mode.
Press or button to set this function as on or
off.
Scan Encrypted
Scan Encrypted Channel feature will always be ON
after performing rst time installation. When this
setting is on, search process will locate the encrypted
channels as well. If it is set as OFF manually, encrypted
channels will not be located while in automatic search
or manual search. Use or button to select
Scan Encrypted and then press or button to
set this setting as On or Off.
Parental Control
Some channels broadcast material which you do not
want younger members of the family to watch. Any
channel can be ‘locked so that it cannot be selected
for viewing unless a four-digit PIN code is entered.
In this way any channel not suitable for younger
viewers can be prohibited.
This function enables or disables the menu protection
system and allows the PIN code to be changed.
Use or buttons to highlight Parental Control.
Press OK button to enter Parental Control menu. A
dialog box asking for the lock key is displayed:
There is only one key which is set to0000 initially.
Enter lock key. If wrong lock key is entered, the
WRONG PIN message will be displayed on the
screen and the TV returns to the previous menu. If the
PIN is correct, the Parental Control menu including
following items will be displayed:
02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32875W_1205UK_10064576_50158417.indd 53 29.10.2009 08:45:49
English - 54 -
Maturity Lock (**)
(**) If you set Country option as UK in the rst time
installation, Maturity Lock option will not be vsible.
When set, this option gets the maturity information
from the broadcast and if this maturity level is disabled,
the TV will not display the related video-audio.
Menu Lock
Use or buttons to set Menu Lock. Here, you
can set/reset locking function for the main menu or
the installation menu to restrict access. If the menu
lock is disabled, there will be free access to the menu
system.
Disabled: All menus are unlocked.
All Menus: All menus are accessible only with the
correct lock key. So the user cannot add, delete,
rename or move the channels and cannot set the
timers.
Installation Menu: Installation menu is locked, so the
user cannot add channels. Changes will be updated
after exiting Con guration Menu.
Set PIN
Use or buttons to go to “Set PIN option.
Press OK to display the Set PIN window. Use
numeric buttons to enter new pin number you will need
to input your new pin a second time for veri cation
purposes. The factory default pin number is 0000, if
you change the pin number make sure you write it
down and keep it safe.
Time Settings(**)
(**): Time setting will not be available for UK.
In the con guration menu, highlight the Time Settings
item by pressing or buttons. Press OK and
Time Settings sub menu will be displayed on the
screen:
Use or buttons to highlight the Time Zone
Setting. Time Zone Setting is set using or
buttons. It can be set to AUTO or MANUAL. When
AUTO is selected, Current Time and Time Zone
options will not be available to be set.
If MANUAL option is selected as the Time Zone
Setting, Time Zone can be altered:
By pressing or buttons select Time Zone.
Use or buttons to change the Time Zone
between GMT-12 or GMT+12. Current Time on the
top of the menu list will then change according to
the selected Time Zone.
Receiver Upgrade
Over Air Download (OAD)
To ensure that your TV always has the most up to date
information, use this setting. Please ensure that the TV
is set to standby mode. The TV automatically
powers up at 3.00 A.M. each day and searches for
any new information which may be broadcast and
will download this to your receiver automatically. This
operation will normally take approximately 30 minutes.
If you have an important recording to be carried out at
3.00 A.M. and you do not want to interrupt it, disable
auto OAD search by performing the following:
Press MENU button and using the or buttons
to choose Setup and press OK button.
Highlight Con guration menu with or keys
and press OK.
Use or buttons to chooseRECEIVER
UPGRADE and press OK button.
Using the or button changeAutomatic
scanning from Enabled to Disabled.
HighlightScan for upgrade menu with or
”keys and pres OK to commence upgrade.
After the search progress is completed, the message
Completed searching for upgrade. No new software
was found appears on the screen if no new software
is found.
Dolby Digital
In the Conguration Menu, highlight the Dolby D item
by pressing or buttons. Use the or
”buttons to set the Dolby Digital as On or Off. If the
channel that you are watching supports Dolby Digital,
you can turn this setting on.
Hard of Hearing (*)
Use or button to select Hard of Hearing and
then press or button to set this setting as
On or Off.
If the broadcaster enables any special signal
concerning the audio, you can set this setting as On
to receive such signals.
02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32875W_1205UK_10064576_50158417.indd 54 29.10.2009 08:45:49
English - 55 -
(*) Hard of Hearing function will not be available for UK.
Channel List
Use or “ buttons to go to Channel List option.
Use or buttons to toggle Channel List Mode. If you
selectTV Only, with the or buttons, you
navigate through only TV channels. If you select
Radio Only”, with the or buttons, you
navigate through only radio channels. If you select
Text Only, with the or buttons, you navigate
through only text channels. If you chooseShow All
all channels can be navigated. To save the recent
changes and exit; press the M button.
Digital Audio Out
Use this setting to de ne digital audio out signal type.
Use or buttons to set Digital audio out as
AC3 or PCM.
If your selected channel includes AC3 sound stream,
you should connect your TV to external equipment
by using Spdif out of your TV for enabling the sound
output.If you have no external sound equipment,
please select Digital Audio Out as “PCM by using
or button.
A/V Delay
You can use this setting when there is an AV
synchronization problem in the received broadcast.
Press or button to change the delay.
Audio Description (Optional)
Audio description refers to an additional narration
track for blind and visually impaired viewers of visual
media. You can use this feature, only if the broadcaster
supports that additional narration track. Use or
buttons to select an item. Then use or
buttons to set.
Audio Description (Optional)
This function enables or disables the audio description
feature by pressing the or ”buttons.
Preferred Language (Optional)
By pressing the or buttons the preferred audio
description language is being changed. This setting
can be used, only if it is available.
Relative Volume (Optional)
Using this option, the Audio Description volume level
can be increased or decrased relatively, according to
the general volume.
Active Antenna (*)
Use or buttons to highlight Active Antenna
option. When antenna power option is set as On by
pressing or button, +5V will be transmitted to
the antenna output.This feature enables the use of
active antenna.
Note: Antenna power should be “Off when standard antenna
is used instead of the active antenna.
Standby Search (*)
(*) This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.
Use or button to select Standby Search and
then press or button to set this setting as On or
Off. If you change Standby Search to Off, this function
will be unavailable.
To use Standby search please make sure that
you select Standby Search as On.
Language Settings
In this menu the user can adjust the preferred language.
Select “Language” item in the Setup menu and press
OK button. Then language settings menu will be
displayed.
You can set the desired language options by using
/“ and /“ buttons.
Note: If the Country option is set to Denmark, Sweden,
Norway or Finland, the Language Settings menu will function
as described below:
Language Settings
Use or buttons to highlight the menu item
that will be adjusted and then press or button
to set.
Audio Language is used for selecting the soundtrack
of a channels. Primary settings are the rst priority
when multiple choices are available on a broadcast.
Secondary settings are the alternatives when the
rst options are not available.
Guide Language: If the received EPG data includes
the selected guide language, EPG data language
will be changed accordingly.
Teletext language sets the desired teletext
language.
(*) optional
(*) optional
02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32875W_1205UK_10064576_50158417.indd 55 29.10.2009 08:45:50
English - 56 -
Media Subtitle: In order to display subtitles properly
while viewing a media le via Media Browser use this
setting to select a movie subtitle language.
By pressing or button, select the desired
language option (optional).
Installation
The Installation menu is mainly intended to help you
for creating a Channel Table in most ef cient way.
Select Installation from the main menu by pressing
or buttons.
Automatic Channel Scan
Automatic channel scan is started by pressing
OK button while Automatic channel scan item is
highlighted.
The following message appears on the screen:
Highlight Yes or No by using or buttons and
press OK button to con rm.
If Yes is selected, automatic search starts.
Selecting No cancels automatic search.
After search is completed for digital channels, a
message asking whether to search for analogue
channels appears on the screen:
Highlight Yes and press OK button to search for
analogue channels. The following menu appears on
the screen for analogue channel search:
Set Language item by pressing or button.
Press or button to highlight Country item and
then use or to set. Press or button to
highlight TXT Language. Select a region by using
or button. When nished, press OK or RED button
to continue. To cancel, press the BLUE button.
After APS is nalized, the programme table will appear
on the screen. In the programme table you will see
the programme numbers and names assigned to the
programmes.
Manual Search
In Manual Search, the number of the multiplex is entered
manually and only that multiplex is searched for the
channels. For every valid channel number, signal level
and signal quality are shown on the screen.
In both manual and auto search any existing channel
in the database is not re-stored to avoid redundant
duplicates of that channel.
Clear Service List (*)
(*) This setting is visible only when the Country option is set
to Denmark, Sweden, Norway or Finland.
Use this setting to clear channels stored. Press
or button to select Clear Service List and then
press OK. The following OSD will be displayed on
the screen:
Press OK to cancel.
Select Yes by pressing or button and press
OK to delete all of the channels.
First Time Installation
The user can use this item to load default settings,
which were loaded to the receiver at the factory.
To install factory settings, highlightFirst Time
Installation menu item and press OK button, then
you will be asked whether or not to delete the settings.
SelectingYes by pressing OK button while theYes
is highlighted, will delete the existing channel table.
After factory settings are loaded,First Time
Installation menu will be displayed.
02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32875W_1205UK_10064576_50158417.indd 56 29.10.2009 08:45:51
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75

Grandin LV32W10 Operating Instructions Manual

Category
LCD TVs
Type
Operating Instructions Manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages