2. ARKA
  3. VIDA-GT

ARKA VIDA-GT User manual

  • Hello! I am an AI chatbot trained to assist you with the ARKA VIDA-GT User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
User Manual
VIDA-GT
VIDA-GT
Table of contents
en
Page 2 / 49
Table of contents
Table of contents ...................................................................................................... 2
Safety instructions .................................................................................................... 5
Scope of delivery ...................................................................................................... 6
P
re
p
arat
ion b
ef
o
re
ex
ploi
tat
ion ............................................................................... 8
Front Panel ............................................................................................................. 13
Upper side – LEDs ................................................................................................... 14
Display ................................................................................................................... 15
M
enu S
tr
u
ct
u
re
...................................................................................................... 16
Functional Description............................................................................................ 19
1
. S
tart
up
Me
nu .......................................................................................................19
1.1. Set Language ................................................................................................20
1.2. Time Adjust ..................................................................................................20
1.3. Set Tank Volume ..........................................................................................20
1.4. Set Channel ..................................................................................................21
1.4.1. Channel On/Off .....................................................................................21
1.4.2. Pipe length ............................................................................................22
1.4.3. Pipe Calibration Test .............................................................................22
1.4.4. Calibration Pump Test ...........................................................................23
1.5. Mixing Menu ................................................................................................25
1.5.1. Mixer speed ..........................................................................................25
1.5.2. Period of Mixing ....................................................................................25
2. Menu Basic Settings .............................................................................................27
2.1. Set Language ................................................................................................27
2.2. Time Adjust ..................................................................................................28
2.3. Contrast Adjust .............................................................................................28
2.4. Change PIN Code ..........................................................................................28
VIDA-GT
Table of contents
en
Page 3 / 49
2.5. Factory reset ................................................................................................29
3. Menu Dose Setting...............................................................................................30
3.1. Microbe Lift Menu ........................................................................................31
3.2. Periodically ...................................................................................................33
3.2.1. Period in hours ......................................................................................33
3.2.2. Period in days ........................................................................................33
3.3. Dosage Scheme ............................................................................................34
3.4. Dosage Days .................................................................................................36
3.5. Drops Dosage ...............................................................................................37
3.6. Dosage Manual .............................................................................................38
3.7. Delete Dosage ..............................................................................................38
4. Menu Settings ......................................................................................................39
4.1. Channel On/Off ............................................................................................39
4.2. Pipe Calibration ...........................................................................................39
4.3. Fine Adjust 5 ml ............................................................................................40
4.4. Activate BF (Back Flushing) ..........................................................................41
4.5. Mixing Menu ................................................................................................41
4.6. Tank Volume ................................................................................................41
Short Keys .............................................................................................................. 42
Troubleshooting ..................................................................................................... 43
Service .................................................................................................................... 44
Operating Instructions ............................................................................................ 47
Specification ........................................................................................................... 48
Disposal .................................................................................................................. 49
VIDA-GT
Preface
en
Page 4 / 49
!!! Please read this user manual and the short instructions
carefully. Keep the user manual safe for future reference.
Thank you for choosing our Dosing System VIDA-GT. This device is
based on high technology and standards of ARKA Biotechnologie
GmbH and offers you the easiest way to take care of your aquarium.
To avoid damage and to ensure trouble-free operation, please read
carefully the instructions before commissioning.
Every device is tested carefully before delivery. If there is a problem
that can’t be solved with the help of this user manual you have the
following options:
- Contact your local dealer.
- Email us at: support@dosingcomputer.com
- Do not make any repair on your own, this will cause the loss of
warranty.
- The appliance has to be used for its original purpose only. Any
other type of use and operation beyond the limits of technical
specifications is considered as not intended.
- Do not open the device, this will cause the loss of warranty.
Instructions:
- You can buy additional accessories from your local dealer for
ARKA products.
- All from ARKA supplied accessories ensure an optimal
combination with the Dosing System VIDA-GT.
- Other accessories which are not provided from ARKA may not
be compatible with the system.
VIDA-GT
Safety instructions
en
Page 5 / 49
Safety instructions
Risk of electric shock!
- Connect and operate the appliance only in accordance with the
specifications on the rating label situated on the base of the
machine.
- Do not use your VIDA-GT if either the power cord or appliance
is damaged.
- Do not use the appliance below 0°C and above 50°C.
- Do not allow the appliance to be used by children or persons
with impaired mental, physical or sensory faculties or
insufficient experience and/or skills, unless they are under the
careful supervision and guidance of a person responsible for
their safety. Children must be kept under supervision to prevent
them from playing with the appliance.
- Keep children away from the appliance.
- The packaging elements must not be left within reach of
children as they are potential sources of danger.
- In the event of malfunction, unplug the appliance immediately.
- To avoid potential hazards, repairs such as replacing a
damaged cord should only be performed by our service
personnel.
- Do not plunge the appliance or the power cord into water.
- Use appliance only for its intended dosing of liquids and
suspensions.
- The manufacturer is not liable for damages caused by improper
use.
- Avoid environmental factors such as smoke, dust, vibration,
chemicals, humidity, heat or direct sunlight.
- The black silicone hose must be delivered only from ARKA
Strong magnetic field! Please keep magnetic card,
pacemaker and heart defibrillator, mechanical watch, hearing
aid, vehicle key, USB stick, memory cards, digital camera, cell
phone, CD, DVD, Hard drive etc. away from ARKA device!
VIDA-GT
Scope of delivery
en
Page 6 / 49
Scope of delivery
Item
Qty.
Designation
VIDA-GT Master
1
1
VIDA-GT Master-module
2
1
Power Supply
3
1
12V Adapter
4
1
6 m black silicone hose
5
1
4-channel hose holder
6
1
10ml measuring cylinder
7
4
Magnet stir bar
8
1
-
9
1
User Manual
2
3a
1
VIDA-GT
Scope of delivery
en
Page 7 / 49
5
7
6
4
2
3
VIDA-GT
Preparation before exploitation
en
Page 8 / 49
P
re
p
arat
ion b
ef
o
re
ex
ploi
tat
ion
1. Remove the device from the box and check whether the device
is damaged while transportation. In case of damage please contact
your dealer and do not install the device.
2. Check the content of the box (See Scope of delivery).
3. Place the device in the place where it will work permanently (this
is important in order to be provided the length of the hose from
device to aquarium). If the device will be mounted on the wall use
Annex 1 - Stencil for wall fix (See Scope of delivery). The ARKA
device have to be placed at the level of the upper edge of the
aquarium or a maximum distance of 80 cm below it. The bottom of
the bottles/canister with liquid should be above the ARKA device or at
a maximum distance of 40 cm below it (Figure 1). Do not place device
above the edge of the tank if the device is with disabled function Back
Flushing.
Note: We recommend ARKA device to work with function
Back Flushing On (function Back Flushing is on by default) to avoid
fluid leaking out from the bottle into the aquarium.
**
Figure 1: Arranging level of the aquarium, ARKA device and bottles/canisters
B tt
B tt
ARKA device
max 80 cm
max 40 cm
*Do not place device above
the edge of the tank if the
device is with disabled
function Back Flushing.
ARKA device
VIDA-GT
Preparation before exploitation
en
Page 9 / 49
4. Mount single parts of hose holder (Figure 2) - connect parts A
with parts B (Picture 1) as shown in the picture below (Picture 2).
Picture 2
B
A
A
B
Picture 1
Picture 3
Picture 4
2 cm
Figu
re
2:
Mounting the
par
ts
o
f
ho
s
e
holder
5. Connect the pumps with silicone hose - On the Figure 3 are shown
the input and output of each pump. Connect black silicone hose to the
hose connectors. Use black silicone hose from the box (See Scope of
delivery) to connect pump input and output. The input of the pump
(Figure 3) must enter into the bottle with liquid, the hose from the
VIDA-GT
Preparation before exploitation
en
Page 10 / 49
pump outlet must enter in the aquarium. The hoses in aquarium must
be at a minimum distance of 2 cm from the surface of the water to
avoid reflow of the water (Figure 2, Picture 4).
Note: If you use light-sensitive liquids, the white pump hose has to be
replaced by a black hose.
To change the pump hose read Chapter “Service/Pump hose
exchange” – we recommend replacement of the hoses every two
months.
Figu
re
3:
P
ump
I
npu
t / O
u
t
pu
t
6. Backside view (Picture 4)
VIDA-GT
Preparation before exploitation
en
Page 11 / 49
* The method of attaching the device to the wall is shown in Annex 1:
Stencil for wall fix
** The method of changing the fuse is shown in Chapter Service (See
Service)
Position
Description
A
Holes for securing the device to the wall*
B
Reserve - Service port
C
Port for connection Master-Slave
D
Fuse Holder**
E
Port for 12V Adapter
A
A
B
C
D
E
A
A
A
Picture 4
VIDA-GT
Preparation before exploitation
en
Page 12 / 49
7. Connect Master and Slave device - connect Master and Slave
device via Slave cable from the box (See Scope of delivery). Connect
Slave device first and then Master device to the electrical network. All
four blue LEDs on the upper side of the Slave device start to flash
while the devices establish a connection. Continue setting the channels
as described in Functional Description.
8. Place the bottles and magnet stir bars - place the bottle in the mold
as shown in the picture below (Picture 5). Place one magnet stir bar
from the box (See Scope of delivery) in each bottle. The bottles may
have a diameter between 63 mm and 71 mm. If you replace the bottles
do not forget to remove the magnet stir bar for further use.
3
Mold for
Bottle
Bottles
Picture 5
VIDA-GT
Front Panel
en
Page 13 / 49
Front Panel
Keyboard elements
The keyboard consist of 5 buttons. These buttons are used to operate the
ARKA Dosing System and to navigate through the menus.
Keyboard
Description
- Next Menu Level
- Save entry
- Menu Up
- Increase Values
- Menu Down
- Decrease Values
- Back Flushing (Fast Key)
- Back
- Mixer (Fast Key)
4
5
5
A – Display
B – Keyboard
C – Standby LED
C
A
B
VIDA-GT
Upper side – LEDs
en
Page 14 / 49
Upper side – LEDs
Position
Description
D1
Channel 1
Blue LED – Back Flushing Selected
E1
Channel 1
Red LED-Dosing / Green LED - Clear Out Hose / Orange
LED – Selected Channel during Setup
D2
Channel 2
Blue LED - Back Flushing Selected
E2
Channel 2
Red LED-Dosing / Green LED - Clear Out Hose / Orange
LED – Selected Channel during Setup
D3
Channel 3
Blue LED - Back Flushing Selected
E3
Channel 3
Red LED-Dosing / Green LED - Clear Out Hose / Orange
LED – Selected Channel during Setup
D4
Channel 4
Blue LED - Back Flushing Selected
E4
Channel 4
Red LED-Dosing / Green LED - Clear Out Hose / Orange
LED – Selected Channel during Setup
F
Red LED - Mixers ON
Mixers ON
D1
E3
E4
E2
D2
F
D3
D4
E1
VIDA-GT
Display
en
Page 15 / 49
Display
Position
Description
G
Day of Week:
Mo - Monday
Tu - Tuesday
We - Wednesday
Th - Thursday
Fr - Friday
Sa - Saturday
Su - Sunday
H
Time (hh:mm)
I
Channel Number (1-4)*
J
Dosage Value (1-1999 ml)
K
Day of the next dosing (Su, Mo, Tu, We, Th, Fr, Sa)
L
Time of the next dosing (00-23)
Note: G, H – The display shows current date (G) and time (H);
I, J, K, L – The display shows the next dosing on the
corresponding channel – channel (I), dosage value (J), date (K) and
time (L).
* with connected Slave device you can use 8 channels.
G
H
I
J
K
L
VIDA-GT
Menu Structure
en
Page 16 / 49
M
enu S
tr
u
ct
u
re
Level 1
Level 2
Level 3
Level 4
Level 5
Level 6
Level 7
Level 8
Startup Menu
Set
Language
English
German
French
Time
Adjust
DD-
HH:MM
Set Tank
Volume
Enter
liters
Set
channel
Choose
channel
Channel
On
Pipe
Calibration
Enter
length in
mm
Pipe
calibratio
n test
Yes/No
Calibration
Pump Test
Yes
Calibratio
n Pump
Adjust in
ml
Pump
Test
Yes/No
No
Channel
Off
Mixing
Menu
Mixers
On/Off
Mixers On
Mixers
speed
Enter
mixer
speed
Period of
mixing
2 min on
30 min
2 min
before
dose
Night
mode
Start time
End time
Mixers Off
Basic Settings
Set
Language
English
German
French
Time
Adjust
DD-
HH:MM
Contrast
Adjust
Adjust
Contrast
Value
Change
PIN Code
Enter
new PIN
code
Factory
Reset
Yes/No
VIDA-GT
Menu Structure
en
Page 17 / 49
Dose Settings
Choose
channel
Dosage
Method
Microbe Lift
Menu
Special
Blend
TheraP
Substrate
Clean.
Coralline
All in One
A.ACC
Vitamins&A
minos
Ess.Min.&T
r ace El
Periodically
Enter
Dosage
Value (in
ml)
Period in
Days
Enter
period
Period in
Hours
Enter
period
Dosage
Scheme
Enter
Dosage
Value (in
ml)
Enter
Dosage
time
Enter
next
period
Dosage
Days
Select
Days
Enter
dose time
Enter
dosage
value (in
ml)
Drops
Dosage
Select
Days
Enter
dose time
Enter
dosage
value (in
drops)
Dosage
Manual
Enter
Dosage
Value (in
ml)
Delete
Dosage
Settings
Choose
channel
Channel
On/Off
Pipe
Calibration
Choose
Channel
Enter pipe
length (in
mm)
Enter pipe
width (in
mm)
Calibratio
n adjust
(in ml)
Calibratio
n test
Yes/No
Fine Adjust
5ml
Choose
Channel
Adjust (in
ml)
VIDA-GT
Menu Structure
en
Page 18 / 49
Activate BF
Choose
Channel
BF On/Off
Mixing
Menu
Mixers
On/Off
Mixers On
Mixers
speed
Enter
mixers
speed
Period of
mixing
2 min on
30 min
2 min
before
dose
Night
mode
Start time
End time
Mixers Off
Set Tank
Volume
Enter
liters
VIDA-GT
Functional Description
en
Page 19 / 49
Functional Description
When VIDA-GT device is switched on for the first time and after
factory reset it will display the following:
1
. S
tart
up
Me
nu
Under Startup Menu you must configure the basic settings of the
device and the channels on initial activation of the device. Figure 4
describe Startup menu. From this menu can exit only after the initial
setup of the device to avoid accidental dosing. By pressing the back
button you can return one step back (previous menu). The value that
was entered/selected before can be shown. If you return back to
display “WELCOME TO ARKA” the entered value will be deleted.
Figure 4: STARTUP MENU Block scheme
VIDA-GT
Functional Description
en
Page 20 / 49
To configure the settings of the device follow these steps:
1.1. Set Language - you can set English, German or French.
The default language is English. Select the menu language with or
. and confirm selected language by pressing button . The
language also can be changed from menu Basic Settings / Set
Language.
1.2. Time Adjust – you can set day and time of the device.
Use buttons or to choose day of the week. To confirm press
. . Use buttons or to adjust the time and press . Use
back button to return one position back. The date and time also
can be changed from menu Basic Settings / Time Adjust.
1.3. Set Tank Volume – you can set tank volume. The value is
from 50 liters to 5000 liters and can be changed in 1 liter step. The
default value is 100 liters. Use buttons or to choose the value.
To move to the next digit use button . To return to the previous
digit use back button . Confirm with button . The Tank Volume
also can be changed from menu Settings / Set Tank Volume.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/