2. Whirlpool
  3. AKB 086 IX
AKB 086 IX

Whirlpool AKB 086 IX Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Whirlpool AKB 086 IX Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the minimum distance required from the cooking surface to the appliance?
    How do I replace burnt-out bulbs?
    How do I remove or clean the grease filter?
    How do I mount or replace the carbon filter?
5019 100 75057
AKB 086
INSTALLATIONSANGABEN
Mindestabstand zur Kochfläche: 65 cm (Elektroplatten), 75 cm (Gas-, Öl-,
Kohlekochplatten)
INSTALLATIONSANGABEN
Mindestabstand zur Kochfläche: 65 cm (Elektroplatten), 75 cm (Gas-, Öl-,
Kohlekochplatten)
FICHE D'INSTALLATION
Distance minimale par rapport à la cuisinière : 65 cm (cuisinière électrique),
75 cm (cuisinière à gaz, mazout ou charbon)
INSTALLATIESCHEMA
Min. afstand van het kooktoestel: 65 cm (elektrische kooktoestellen), 75 cm
(kooktoestellen op gas, olie of kolen)
FICHA DE INSTALACIÓN
Distancia mínima desde los quemadores: 65 cm (quemadores eléctricos),
75 cm (quemadores a gas, gasóleo o carbón)
FICHA DE INSTALAÇÃO
Distância mínima do fogão: 65 cm. (fogões eléctricos), 75 cm. (fogões a gás,
óleo ou carbono)
SCHEDA INSTALLAZIONE
Distanza minima dai fuochi: 65 cm (fuochi elettrici), 75 cm (fuochi a gas,
gasolio o carbone)
ù(ùü+ù$ùþ
ü$12.)12.1.)2"0120" FP02!"0120" FP0120"
.0! #02!0. #0! #.
D
GB
F
NL
E
P
I
GR
5019 100 75057
AKB 086
5
5
4
4
90° 90°
261
496
1
2
3
6
9
9
7
90°
90°
10
8
8
8
8
A
Die Schrauben der
Befestigungsfedern am
Hängemöbel fest anziehen.
Tighten the screws of the
fixing clips to the wall unit.
Serrez les vis des ressorts
de fixation à l'élément mural.
Draai de schroeven van de
bevestigingsveren aan het
keukenkastje.
Apretar los tornillos de los
muelles de fijación al
mueble colgante.
Aperte os parafusos das
molas de fixação no móvel.
Serrare le viti delle molle di
fissaggio al pensile.
3202"/0"2&
0.2!&120!&1"12
2 #
5019 100 75057
AKB 086
1.
Control panel.
2.
Grease filter (inside the extractor grille).
3.
Lighting unit.
4.
Extractor grille.
REPLACING BULBS
1.
Unplug the appliance or switch off the mains
power supply.
2.
Remove the extractor grille.
3.
Remove the burnt-out bulb.
Use 40W max E14 bulbs only.
4.
Remount the extractor grille.
REMOVING AND REPLACING OR
CLEANING THE GREASE FILTER
1.
Unplug the appliance or switch off the mains
power supply.
2.
Remove the extractor grille (turn the side
knobs 90°).
3.
Remove the device fixing the grease filter.
4.
Remove the dirty grease filter.
5.
After replacing or cleaning the grease filter
(depends on model), remount in reverse
order, making sure the entire extraction
surface is covered.
FITTING OR RENEWING THE CARBON
FILTER
1.
Unplug the appliance or switch off the mains
power supply.
2.
Open the extractor grille.
3. Mounting:
Fit the carbon filter over the motor
protection grille - the reference mark (
a
) on
the edge of the carbon filter should line up
with the arrow on the fan shroud (
b
).
Turn clockwise.
Removing:
turn anti-clockwise.
4.
Remount the extractor grille.
CONTROL PANEL
A.
Speed selector
B.
Light switch.
C.
Extraction speed indicator.
2
3
1
3
4
O123
OI
O123
OI
B
A
90° 90°
medium amount of
steam and fumes
large amount of steam
and fumes
small amount of steam
and fumes
C
b
a
b
a
PRODUCT DESCRIPTION SHEET
F NL E PGBD GRI
/