53.2 mm - use
45.7 mm - use
43.2 mm - use
53.2 mm - use
45.7 mm - use
43.2 mm - use
??
Ensure there is no physical interference between the heatsinks and the
circuit components as it may cause short circuit. Use tape to cover the
circuit components when necessary.
Ensure there is no physical interference between the heatsinks and the
circuit components as it may cause short circuit. Use tape to cover the
circuit components when necessary.
3 4
5
3.5 mm
4.0 mm
4.0 mm
NVIDIA GeForce: GT 440
NVIDIA GeForce:
GTX 650 Ti, GT 240, GT 220 (not LP), 9400 GT (not LP), 8500 GT (not LP), 7600 GS, 7200 GS (TC)
AMD Radeon:
HD 7790, 6770, 6750, 6670, 6670 (LP), 6570, 5770, 5550 (OEM), 4770, 4730, 4670, 4650, 4550,
4350 (LP), 3650, 3470, 3450, 2600 XT, 2600 Pro, 2400 XT, 2400 Pro, X1650 XT, X1650 Pro,
X1600 XT,X 1600 Pro, X1550, X1300 XT, X1300 Pro, X1300
Choose the right mounting hole:
Mounting Hole
Compatible Models
①① 53.2 mm x 53.2 mm
②② 45.7 mm x 45.7 mm
③③ 43.2 mm x 43.2 mm
Spacer
Please note this table is for reference only. Refer to your own VGA card holes position during installation.
The updated information is available at as1p.arctic.ac
Accessories
Preparation
1 2
Mixing Wand
Spacers (4.0 mm) (white)
Accelero S1 PLUS
Installation Manual
Instalační příručka: www.arctic.ac/fileadmin/as1p/manual_cz.pdf
Telepítési kézikönyv: www.arctic.ac/fileadmin/as1p/manual_hu.pdf
Instrukcja montażu: www.arctic.ac/fileadmin/as1p/manual_pl.pdf
Installatiehandleiding: www.arctic.ac/fileadmin/as1p/manual_nl.pdf
Montageanleitung: www.arctic.ac/fileadmin/as1p/manual_de.pdf
Guide d’installation: www.arctic.ac/fileadmin/as1p/manual_fr.pdf
Manual de instalación: www.arctic.ac/fileadmin/as1p/manual_es.pdf
Manual de Instalação: www.arctic.ac/fileadmin/as1p/manual_pt.pdf
Installationsmanual: www.arctic.ac/fileadmin/as1p/manual_se.pdf
If your VGA card is using the 3 43.2 mm x 43.2 mm mounting hole
If X > 25 mm, use mounting clip in Orientation A.
If X < 25 mm, use mounting clip in Orientation B.
Measure the distance between the bottom mounting hole and the edge of the card.Measure the distance between the bottom mounting hole and the edge of the card. Orientation A Orientation B
Must thoroughly mix the entire amount of
compound of both bags for 5 minutes.
Not mixing for 5 minutes will lead to no
adhesiveness of the glue. Application has
to be done within 15 minutes thereafter.
G-1 (White Compound 1.5 g) x 1
G-1 (Grey Compound 1.5 g) x 1
VGA Bracket
x 4
Spacer
Spacer
3.5 mm
NVIDIA GeForce: GTX 650, GT 640
Washers
Not cleaning circuit components thoroughly with an eraser leads to
no adhesiveness of the G-1.
Not cleaning circuit components thoroughly with an eraser leads to
no adhesiveness of the G-1.
x 1x 1x 1x 1
x 1
x 4
Spacers (3.5 mm) (black)
x 1
Heatsinks
A
x 8
Heatsinks
B
x 4
Screws (M2)
x 4
EN
NVIDIA GeForce:
GTS 450, 250, 240 (OEM), 150 (OEM), GT 340, 330, 320, 130 (OEM), 9800 GTX+, 9800 GTX, 9800 GT,
9600 GT, 9600 GSO 512, 9600 GSO, 9500 GT (not LP), 8800 GTS 512 (G92), 8800 GTS (G92), 8800
GT, 8800 GS (9600GSO), 8600 GTS, 8600 GT GDDR3, 8600 GT DDR2, 7950 GT, 7900 GTX, 7900 GT,
7900 GS, 7800 GTX 512, 7800 GTX, 7800 GT, 7600 GT
AMD Radeon:
HD 6870, 6850, 6790, 5850, 5830, 4870, 4850, 4830, 3870, 3850, 3690, X1950 XTX, X1950 XT, X1950
Pro, X1950 GT, X1900 XTX, X1900 XT, X1900 GT, X1800 XT, X1800 XL, X1800 GTO
