ASROCK Radeon RX 7900 XTX AQUA 24GB OC Installation guide

Radeon RX 7900 XTX AQUA 24GB OC

Liquid Cooling Quick Installation Guide

Liquid Cooling Your Graphics Card

ASRock Radeon RX 7900 XTX AQUA 24GB OC graphics card is equipped with a unique AQUA liquid cooling system, which offers

great cooling efficiency and provides high performance. The instructions below demonstrate how to install the water pipes on

the Radeon RX 7900 XTX AQUA 24GB OC graphics card.

AFront Side BRear Side

Inlet pipe

(cool water)

Outlet pipe

(warm water)

Inlet pipe

(cool water)

Outlet pipe

(warm wter)

G1/4" Water plugs

Before Installation

• Read this installation guide carefully before installing the RX7900XTX AQUA graphics card.

• Please use appropriate liquid cooling materials to ensure efficient heat dissipation.

• Make sure that the air in the pipes is completely exhausted.

Installation Procedures

1. Choose either Method A (Front side) or Method B (Rear side) to liquid cool your graphic card.

2. Locate the correct inlet and outlet ports.

3. Tighten two G1/4" water plugs.

4. Install liquid cooling pipes.

ATTENTION! Please make sure you connect the inlet (cool water) and outlet (warm water) pipes correctly as shown below.