Astria Fireplaces Paris Lights Instruction Sheet

Type
Instruction Sheet

This manual is also suitable for

Astria Fireplaces Paris Lights is a 43-inch vent-free linear fireplace. It comes with a flame draft shield kit to prevent drafts from affecting the flame and a barrier kit to reduce the risk of burns from the hot viewing glass. The fireplace must be off and cold before beginning installation. Do not touch the glass until it has cooled. Never allow children to touch the glass.

Astria Fireplaces Paris Lights is a 43-inch vent-free linear fireplace. It comes with a flame draft shield kit to prevent drafts from affecting the flame and a barrier kit to reduce the risk of burns from the hot viewing glass. The fireplace must be off and cold before beginning installation. Do not touch the glass until it has cooled. Never allow children to touch the glass.

REQUIRED TOOLS AND SUPPLIES
Phillips Screwdriver
GENERAL INFORMATION
WARNING: Barrier kit cat. no. F2882 is required
when draft shield kit is installed.
Glass Panel
Bracket
Screws
Figure 1 - Installing Glass Panel
127146-01C 1
IHP.us.com
DRAFT SHIELD KITS FOR 43" VENT-FREE LINEAR FIREPLACES
[FOR USE WITH MODELS PARISLIGHTS43, LEXINGTONLIGHTS43 AND VRL4543]
DRAFT SHIELD KITS
43" VENT-FREE LINEAR FIREPLACES
P/N 127146-01
Rev. C, 04/2018
HEARTH PRODUCTS
KITS AND ACCESSORIES
KIT CONTENTS
1 ea. Flame Draft Shield Kit
1 ea. Instruction Sheet
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Printed in U.S.A. © 2014 Innovative Hearth Products
P/N 127146-01 Rev. C 04/2018
IHP reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products. Consult your local distributor for
fireplace code information.
Innovative Hearth Products (IHP)
1769 East Lawrence Street • Russellville, AL 35654
Cat. No. Model Description
F1031 LV43DS Draft Shield, Linear Vent-Free
The purpose of this kit is to prevent drafts from affecting the flame.
READ ALL THE STEPS BEFORE STARTING THE INSTALLATION
THE FIREPLACE MUST BE OFF AND COLD BEFORE BEGINNING.
ALL WARNINGS, PRECAUTIONS AND INSTRUCTIONS IN THE
INSTALLATION AND OPERATION MANUAL PROVIDED WITH THE
APPLIANCE APPLY TO THESE INSTRUCTIONS.
If you encounter any problems, need clarification of these instructions
or are not qualified to properly install this kit, contact you local dis-
tributor or dealer.
If any of these parts are missing or damaged, contact your dealer or
IHP.us.com for referral information.
GLASS PANEL INSTALLATION
The glass panel assembly should be installed after the fireplace is completely
framed and finished. Attached brackets to the front side face on each side
of the fireplace using two screws as shown in Figure 1. Position the glass
panel in the bracket so that it is securely in place.
DANGER
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
A barrier designed to reduce the risk of burns from the
hot viewing glass shall be installed for the protection of
children and other at-risk individuals.
  • Page 1 1

Astria Fireplaces Paris Lights Instruction Sheet

Type
Instruction Sheet
This manual is also suitable for

Astria Fireplaces Paris Lights is a 43-inch vent-free linear fireplace. It comes with a flame draft shield kit to prevent drafts from affecting the flame and a barrier kit to reduce the risk of burns from the hot viewing glass. The fireplace must be off and cold before beginning installation. Do not touch the glass until it has cooled. Never allow children to touch the glass.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI