Filament Design CLI-JB-029956 Installation guide

Z14-51P-C

APX WT. 8.80 LBS

Read directions and follow steps 1-10

Z14-51P-C

WARNING: TO AVOID THE RISK OF ELECTRICAL SHOCK,

BE SURE TO SHUT OFF THE POWER WHILE INSTALLING

OR SERVICING THIS FIXTURE.

FOR RETURN SHIPPING PURPOSES:

PLEASE RETAIN ORIGINAL PACKAGING TO

MINIMIZE DAMAGE.

COMPONENT LIST

8) Screw the lower column(C)into the socket assembly(B)with the

shade(A) in place..

9) Screw the center column(D)(E) into lower column(C),screw the upper

column(G)(F)and the canopy(H)into the center column(E)according

the drawing..

10) Install bulb into the bulb sockets.

Recommended maximum (3)100Watt “Type “A” Bulb.

Or(3) maximum 23Watt CFL Bulb

(Bulbs not included)

LAYOUT ALL COMPONENTS AND REVIEW PARTS BEFORE ASSEMBLY

Revision 0 –25/11/13 Made in China ./ Hecho en China