MrSteam MS Speakers Installation & Operation Manual

MrSteam
Brand
MrSteam
Model
MS Speakers
Category
Loudspeakers
Type
Installation & Operation Manual

This manual is also suitable for

MrSteam MS Speakers are designed to provide high-quality audio in steam rooms. With a peak power of 60 watts and an RMS power of 30 watts, these speakers deliver clear and immersive sound. The 8-ohm impedance ensures compatibility with a wide range of audio systems.

The speakers feature a 5 13⁄16” x 5 13⁄16” mounting hole, making them easy to install in walls or ceilings. The integral mounting brackets provide a secure fit, preventing the speakers from falling.

To ensure watertightness, a bead of silicone RTV should be applied around the edge of the speakers before installation. The speakers should not be placed in contact with direct water or steam emission.

MrSteam MS Speakers are designed to provide high-quality audio in steam rooms. With a peak power of 60 watts and an RMS power of 30 watts, these speakers deliver clear and immersive sound. The 8-ohm impedance ensures compatibility with a wide range of audio systems.

The speakers feature a 5 13⁄16” x 5 13⁄16” mounting hole, making them easy to install in walls or ceilings. The integral mounting brackets provide a secure fit, preventing the speakers from falling.

To ensure watertightness, a bead of silicone RTV should be applied around the edge of the speakers before installation. The speakers should not be placed in contact with direct water or steam emission.

PUR 100401SQ 5.22
Grill
Speaker
Wall or
Ceiling
Silicone
RTV
Brackets
mr
.steam®Square Speakers
___________________________________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS Model MS-Speakers SQ
PACKAGE CONTENTS:
2 Speakers
1 Installation Instructions
2 Templates
_______________________________________________________
SPEAKER RATINGS:
60 watt peak / 30 watt RMS / 8 ohm impedance
Brackets shown
rotated out after
installation
1. Cut a 5 13⁄16” x 5 13⁄16” hole to mount each speaker.
All audio wiring shall be installed in accor-
dance with National Electric Code and local electrical
codes.
2. Connect the speaker wires from the stereo to the
terminals of the speaker. The “+” terminal is identified
by a “+” symbol and is larger than the “–”.
3. Test speakers before securing to wall.
4. Remove the front grill of the speaker by gently rotating
out any two opposite brackets by hand as shown in the
installed view and pressing them down to pop the grill
off. Return the brackets to the original position before
installing speaker.
Failure to engage mounting brackets
correctly or improper installation may result in a falling
object hazard.
5. Apply a bead of silicone RTV (not supplied) around the
edge of the speakers as shown in the diagram as
required to obtain a watertight seal.
6. Fit the speaker into the speaker-mounting hole.
7. Secure the speaker in place using the integral mounting
brackets. The mounting brackets will rotate out and
tighten when the 4 large screws are turned clockwise.
NOTE: DO NOT OVER TIGHTEN SCREWS.
8. Gently tug on speakers to ensure they are secure in
the wall/ceiling.
9. Carefully replace the speaker grills by pressing them
in place.
10. Let the silicone cure per manufacture's instructions
before using steam room.
IMPORTANT:
Do not place speakers in contact with
direct water or steam emission. Speakers may be
installed in either walls or ceilings.
CAUTION
!
CAUTION
!
mr
.steam®
[email protected] • www.mrsteam.com
43-20 34th Street, Long Island City, NY 11101 • : 1 800 76 STEAM
9410 S. La Cienega Blvd. Inglewood CA 90301 • 1 800 72 STEAM
WARRANTY:
To view or download the MrSteam Controls &
Accessories Warranty and register your product go to:
blog.mrsteam.com/wr
mr.steam®
www.mrsteam.com • [email protected]
43-20 34th Street, Long Island City, NY 11101
TEL
: 1-800-76-STEAM
9410 S. La Cienega Blvd. Inglewood CA 90301
TEL
: 1-800-72-STEAM
mr.steam
®
S Q U A R E S P E A K E R T E M P L AT E
513⁄16”
513⁄16”
mr.steam®
www.mrsteam.com • [email protected]
43-20 34th Street, Long Island City, NY 11101
TEL
: 1-800-76-STEAM
9410 S. La Cienega Blvd. Inglewood CA 90301
TEL
: 1-800-72-STEAM
mr.steam
®
S Q U A R E S P E A K E R T E M P L AT E
513⁄16”
513⁄16”
  • Page 1 1
  • Page 2 2
  • Page 3 3

MrSteam MS Speakers Installation & Operation Manual

MrSteam
Brand
MrSteam
Model
MS Speakers
Category
Loudspeakers
Type
Installation & Operation Manual
This manual is also suitable for

MrSteam MS Speakers are designed to provide high-quality audio in steam rooms. With a peak power of 60 watts and an RMS power of 30 watts, these speakers deliver clear and immersive sound. The 8-ohm impedance ensures compatibility with a wide range of audio systems.

The speakers feature a 5 13⁄16” x 5 13⁄16” mounting hole, making them easy to install in walls or ceilings. The integral mounting brackets provide a secure fit, preventing the speakers from falling.

To ensure watertightness, a bead of silicone RTV should be applied around the edge of the speakers before installation. The speakers should not be placed in contact with direct water or steam emission.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents