Optoma EP763 User manual

1

English

Table of Contents ...................................................................................1

Usage Notice ..........................................................................................2

Safety Information .........................................................................................2

Precautions....................................................................................................3

Eye Safety Warnings .....................................................................................5

Introduction.............................................................................................6

Product Features ...........................................................................................6

Package Overview.........................................................................................7

Product Overview ..........................................................................................8

Main Unit ................................................................................................................ 8

Control Panel ......................................................................................................... 9

Connection Ports ................................................................................................. 10

Remote Control .................................................................................................... 11

Installation ............................................................................................12

Connecting the Projector .............................................................................12

Connect to Computer/Notebook .......................................................................... 12

Connect to Video Sources ................................................................................... 14

Powering On/Off the Projector .....................................................................16

Powering On the Projector ................................................................................... 16

Powering Off the projector ................................................................................... 17

Warning Indicator ................................................................................................. 17

Adjusting the Projected Image.....................................................................18

Adjusting the Projector’s Height ........................................................................... 18

Adjusting the Projector’s Zoom / Focus ............................................................... 19

Adjusting Projected Image Size ........................................................................... 19

User Controls ....................................................................................... 20

Control Panel & Remote Control .................................................................20

On-screen Display Menus ...........................................................................23

How to operate .................................................................................................... 23

Menu Tree ............................................................................................................ 24

Image ................................................................................................................... 25

Display ................................................................................................................ 29

Setup .................................................................................................................... 32

Options ................................................................................................................. 38

Appendices...........................................................................................41

Troubleshooting ...........................................................................................41

Image Problems .................................................................................................. 41

Intermission Problems ........................................................................................ 44

Projector Status Indication .................................................................................. 44

Remote Control Problems ................................................................................... 46

Replacing the Lamp.....................................................................................47

Compatibility Modes ....................................................................................49

RS232 Commands ......................................................................................50

Ceiling Mount Installation ............................................................................53

Optoma Global Ofces ................................................................................54

Regulation & Safety notices ........................................................................56

Table of Contents

2

English

Usage Notice

Safety Information

The lightning ash with arrow heard within an equilateral triangle is

intended to alert the user to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that may be of sufcient magni-

tude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of import operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THE PROJECTOR TO RAIN OR MOISTURE. DANGEROUS HIGH

VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE

CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

Class B emissions limits

This Class B digital apparatus meets all requirements of the Canadian Inter-

ference-Causing Equipment Regulations.

Important Safety Instruction

1. Read these instructions –before using this projector.

2. Keep these instructions –for future reference.

3. Follow all instructions.

4. Install in accordance with the manufacturer’s instructions :

A. Do not block any ventilation openings. To ensure reliable

operation of the projector and to protect it from overheating, put the

projector in a position and location that will not interfere with its proper

ventilation. For example, do not place the projector on a bed, sofa,

carpet, or similar surface that may block the ventilation openings. Do not

put it in an enclosure, such as a bookcase or a cabinet that may keep air

from owing through its ventilation openings.

B. Do not use this projector near water or moisture. To reduce

the risk of re or electric shock, do not expose the projector to rain or

moisture.

C. Do not install near any heat sources, such as radiators, heaters,

stoves or other apparatus (including ampliers) that produce heat.

5. Clean only with a dry cloth.

6. Only use attachments/accessories specied by the manufacturer.

7. Refer all servicing to qualied service personnel. Servicing is required

when the projector has been damaged in any way:

 Such as power supply cord or plug is damaged.

 Liquid has been spilled or objects have fallen into the apparatus.

 The projector has been exposed to rain or moisture, does not operate

normally, or has been dropped.

Do not attempt to service this projector yourself. Opening or removing

covers may expose you to dangerous voltages or other hazards. Please

call Optoma to be referred to an authorized service center near you.

8. Do not let objects or liquids enter the projector –as they may touch

dangerous voltage points or short-out parts that could result in a re or

electric shock.

9. See projector enclosure for safety related markings.

10. The projector should not be adjusted or repaired by anyone except prop-

erly qualied service personnel.

3

English

Usage Notice

When the lamp

reaches the end

of its life, the

projector will

not turn back on

until the lamp

module has

been replaced.

To replace the

lamp, follow

the procedures

listed under

“Replacing the

Lamp” section

on pages 47-48.

Precautions

Please follow all warnings, precautions and

maintenance as recommended in this user’s

guide.

▀■ Warning- Do not look into the projector’s lens when the lamp is

on. The bright light may damage your eyes.

▀■ Warning- To reduce the risk of  re or electric shock, do not

expose this projector to rain or moisture.

▀■ Warning- Please do not open or disassemble the projector as

this may cause electric shock.

▀■ Warning- When replacing the lamp, please allow unit to cool

down, and follow all replacement instructions.

See pages 47-48.

▀■ Warning- This projector will detect the life of the lamp itself.

Please be sure to change the lamp when it shows

warning messages.

▀■ Warning- Use the “Lamp Reset” function from the on-screen

display “Options|Lamp Settings” menu after replac-

ing the lamp module (refer to page 40).

▀■ Warning- When switching the projector off, please ensure the

cooling cycle has been completed before disconnect-

ing the power. Allow 90 seconds for the projector to

cool down.

▀■ Warning- Do not close the lens door when projector is in opera-

tion.

▀■ Warning- When the lamp is approaching to the end of its life

time, the message “Lamp Warning: Lamp life

exceeded.” will show on the screen. Please contact

your local reseller or service center to change the

lamp as soon as possible.

▀■ Warning- To reduce the risk of injury to the eyes, do not look

directly into the laser beam on the remote control

and do not point the laser beam into anyone’s eyes.

This remote control is equipped with a Class II laser

that emits radiation.

4

English

Usage Notice

Do:

 Turn off the product before cleaning.

 Use a soft cloth moistened with a mild detergent to clean the

display housing.

 Disconnect the power plug from the AC outlet if the product

is not being used for a long period of time.

Don’t:

 Do not block the ventilation slots and openings on the unit.

 Do not use abrasive cleaners, waxes or solvents to clean the

unit.

 Do not use under the following conditions:

- In extremely hot, cold or humid environments.

- In areas susceptible to excessive dust and dirt.

- Near any appliance that generates a strong magnetic eld.

- In direct sunlight.

5

English

Usage Notice

Eye Safety Warnings

▀■ Avoid staring directly into the projector's beam of light at all

times.

▀■ Minimize standing facing into the beam. Keep your back to

the beam as much as possible.

▀■ Using a stick or laser pointer is recommended to avoid the

need for the presenter to enter the beam.

▀■ Ensure that projectors are located out of the line of sight from

the screen to the audience; this ensures that, when presenters

look at the audience, they do not also have to stare at the pro-

jector lamp. The best way to achieve this is by ceiling-mount-

ing the projector rather than placing it on oor or table top.

▀■ When projector is used in a classroom, adequately supervise

students when they are asked to point out something on the

screen.

▀■ In order to minimize the lamp power needed, use room blinds

to reduce ambient light levels.

6

English

Introduction

Product Features

This product is a XGA single chip 0.55” DLP

®

projector.

Outstanding features include:

 True XGA, 1024 x 768 addressable pixels

 Texas Instruments Single chip DLP

®

Technology

 NTSC/NTSC4.43/PAL/PAL-M/PAL-N/SECAM and

HDTV compatible (480i/p, 576i/p, 720p, 1080i)

 Auto source detection with user denable settings

 Full function IR remote mouse control with laser pointer

 User friendly multilingual On Screen Menu

 Advanced digital keystone correction and high quality

full screen image re-scaling

 User friendly control panel

 One built-in speaker with 2 Watt amplier

 4 dedicated audio inputs

 WXGA, SXGA, SXGA+ compression and VGA, SVGA

re-sizing

 Macintosh and PC compatible

 DVI-D support (HDCP compliant)

7

English

Introduction

Power Cord 1.8m

IR Remote Control

Package Overview

This projector comes with all the items shown

below. Check to make sure your unit is complete.

Contact your dealer immediately if anything is

missing.

Documentation :



User’s Manaul



Warranty Card



Quick Start Card



WEEE Card

Due to the

difference in

applications for

each country,

some regions may

have different

accessories.

2 x AAA Batteries

Projector

VGA Cable 1.8m

USB Cable 1.8m

Carrying Case

8

English

Introduction

1. Control Panel

2. Zoom

3. Focus

4. Zoom Lens

5. Lens door

6. Elevator Button

Main Unit

Product Overview

4

2

7

9

10

3

6

5

11

8

1

7. Elevator foot

8. IR Receivers

9. Connection Ports

10. Power Socket

11. Tilt-Adjustment Feet

9

English

Introduction

Control Panel

1. Power/Standby

2. Re-Sync

3. Four Directional Select Keys

4. Keystone Correction

5. Menu

6. Source

7. Enter

8. Lamp LED

9. Power LED

10. Temp LED

11. IR Receiver

8 9 10

5

7

6

4

2

1

3

11

10

English

Introduction

Connection Ports

1. DVI-D Input Connector (PC Digital and HDCP)

2. VGA1-In/ SCART Connector (PC Analog Signal/

Component Video Input, HDTV/SCART Input)

3. VGA-Out Connector (Monitor Loop-through Output)

4. Composite Video Input Connector

5. S-Video Input Connector

6. USB Connector (Connect to PC for Remote Mouse function)

7. RS-232 Connector

8. Kensington

TM

Lock Port

9. +12V Relay Connector

10. +5V Relay Connector

11. Audio-Out Connector

12. Audio-In (for S-Video/Video Connector)

13. Audio-In (for VGA2-In Connector)

14. Audio-In (for VGA1-In Connector)

15. Audio-In (for DVI-D Connector)

16. VGA2-In Connector (PC Analog Signal/Component Video

Input/HDTV)

17. Power Socket

1

234567

16

15141312

11

108

9

17

11

English

Introduction

Remote Control

1. Button LED

2. Power On/Off

3. Laser Button

4. Page Up

5. Mouse Right Click

6. Four Directional

Select Keys

7. Re-Sync

8. Page Down

9. Volume +/-

10. Zoom

11. AV mute

12. Video Source

13. VGA-2 Source

14. VGA-1 Source

15. S-Video Source

16. DVI-D Source

17. Brightness

18. Menu

19. Keystone +/-

20. Source

21. Enter

22. Mouse Left Click

23. PC/Mouse control

1

10

11

1314

3

2

23

15

16

17

19

20

8

21

22

4

7

18

9

12

5

6

12

English

Installation

Connecting the Projector

Due to the

difference in

applications for

each country,

some regions may

have different

accessories.

Connect to Computer/Notebook/DVI

1...............................................................................................................Power Cord

2................................................................................................................. USB Cable

3........................................................................... DVI Cable (Optional Accessory)

4.............................................................Audio Input Cable (Optional Accessory)

5........................................................................RS232 Cable (Optional Accessory)

1

3

2

5

4

+12V Relay Output

13

English

Installation

Connect to Computer/Notebook/VGA-In

Due to the

difference in

applications for

each country,

some regions may

have different

accessories.

1...............................................................................................................Power Cord

2................................................................................................................VGA Cable

3................................................................................................................. USB Cable

4.............................................................Audio Input Cable (Optional Accessory)

5........................................................................RS232 Cable (Optional Accessory)

VGA2-In

1

+12V Relay Output

2

3

4

5

VGA1-In

2

4

14

English

Installation

Connect to Video/DVI, VGA2-In

Due to the

difference in

applications for

each country,

some regions may

have different

accessories.

+12V Relay Output

Video Output

DVD Player, Set-top Box,

HDTV receiver

1

1...............................................................................................................Power Cord

2....D-Sub to RCA Cable for HDTV/Component Cable (Optional Accessory)

3.............................................................Audio Input Cable (Optional Accessory)

4....................................................Composite Video Cable (Optional Accessory)

2

3

4

3

15

English

Installation

Connect to Video/VGA1-In/SCART

+12V Relay Output

S-Video Output

DVD Player, Set-top Box,

HDTV receiver

1

1...............................................................................................................Power Cord

2................................................................................................................VGA Cable

3.............................................................Audio Input Cable (Optional Accessory)

4.....................................................................S-Video Cable (Optional Accessory)

5.......................................SCART RGB/S-Video Adaptor (Optional Accessory)

2

3

4

5

Due to the

difference in

applications for

each country,

some regions may

have different

accessories.

5

16

English

Installation

Powering On the Projector

1. Open the lens door. 

2. Ensure that the power cord and signal cable are securely

connected.  The Power LED will be Amber.

3. Turn on the lamp by pressing “Power/Standby” button

either on the top of the projector or on the remote. The

Power LED will ash green.

The startup screen will display in approximately 10 seconds.

The rst time you use the projector, you can select your

preferred language from quick menu after the startup screen

display.

4. Turn on your source (computer, notebook, video player,

etc.). The projector will detect your source automatically.

If you connect multiple sources at the same time, press the

“Source” button on the control panel or direct source key on

the remote control to switch between inputs.

Powering On/Off the Projector

Turn on the

projector rst and

then select the

signal sources.

2

Power/Standby

Lens Door

1

Power LED

17

English

Installation

Warning Indicator

 When the “LAMP” indicator lights red, the projector will

automatically shut itself down. Please contact your local

reseller or service center. See pages 54-55.

 When the “TEMP” indicator lights red, it indicates the pro-

jector has overheated. The projector will automatically shut

itself down.

Under normal conditions, the projector can be switched on

again after it has cooled down. If the problem persists, you

should contact your local dealer or our service center.

See pages 54-55.

 When the “LAMP” indicator ashes red, it indicates the fan

has failed. Please contact your local dealer or our service

center. See pages 54-55.

Powering Off the Projector

1. Press the “Power/Standby” button to turn off the projec-

tor lamp, you will see a message displayed on the projec-

tor’s screen.

2. Press the “Power/Standby” button again to conrm,

otherwise the message will disappear after 15 seconds.

When you press “Power/Standby” button second, the

system will show the timing countdown on the screen.

3. The cooling fans continue to operate for about 10 seconds

for cooling cycle. When the Power LED turn Amber, the

projector has entered standby mode.

If you wish to turn the projector back on, you must wait

until the projector has completed the cooling cycle and

has entered standby mode. Once in standby mode, simply

press “Power/Standby” button to restart the projector.

4. Disconnect the power cord from the electrical outlet and

the projector.

5. Do not turn on the projector immediately following a

power off procedure.

18

English

Installation

Adjusting the Projected Image

Adjusting the Projector’s Height

The projector is equipped with elevator feet for

adjusting the image height.

To raise the image:

1. Press the elevator button

.

2. Raise the image to the desired height angle

, then release

the button to lock the elevator feet into position.

3. Use screw in feet  to ne-tune the display angle.

To lower the image:

1. Press the elevator button.

2. Lower the image, then release the button to lock the

elevator feet into position.

3. Use screw in feet  to ne-tune the display angle.

Tilt-Adjustment Feet

Elevator Foot

Elevator Button

3

1

2

19

English

Installation

Focus Ring

Zoom Ring

Adjusting the Projector’s Zoom / Focus

Adjusting Projection Image Size

You may turn the zoom lever to zoom in or out. To focus the

image, rotate the focus ring until the image is clear. The projector

will focus at distances from 3.9 to 39.4 feet (1.2 to 12.0 meters).

68.7"

(174.4cm)

114.4"

(290.7cm)

160.2"

(407.0cm)

206.0"

(523.3cm)

274.7"

(697.7cm)

30.3"

(76.9cm)

75.7"

(192.3cm)

126.2"

(320.5cm)

176.7"

(448.7cm)

227.1"

(576.9cm)

302.8"

(769.2cm)

3.9'

(1.2m)

39.4'(12.0m)

29.5'(9.0m)

23.0'(7.0m)

16.4'(5.0m)

9.8'(3.0m)

27.5"

(69.8cm)

Width

Height

Diagonal

Hd

Screen

(Diagonal)

Max.

30.3” (76.9cm) 75.7” (192.3cm) 126.2” (320.5cm) 176.7” (448.7cm) 227.1” (576.9cm) 302.8” (769.2cm)

Min.

27.5” (69.8cm) 68.7” (174.4cm) 114.4” (290.7cm) 160.2” (407.0cm) 206.0” (523.3cm) 274.7” (697.7cm)

Screen

Size

Max.

(WxH)

24.2” x 18.2”

61.5 x 46.2cm

60.6” x 45.4”

153.8 x 115.4cm

100.9” x 75.7”

256.4 x 192.3cm

141.3” x 106.0”

359.0 x 269.2cm

181.7” x 136.3”

461.5 x 346.2cm

242.3” x 181.7”

615.4 x 461.5cm

Min.

(WxH)

22.0” x 16.5”

55.8 x 41.9cm

54.9” x 41.2”

139.5 x 104.7cm

91.6” x 68.7”

232.6 x 174.4cm

128.2” x 96.1”

325.6 x 244.2cm

164.8” x 123.6”

418.6 x 314.0cm

219.7” x 164.8”

558.1 x 418.6cm

Hd

Max.

3.57” (9.07cm) 8.93” (22.7cm) 14.88” (37.8cm) 20.83” (52.9cm) 26.78” (68.0cm) 35.71” (90.7cm)

Min.

2.73” (6.9cm) 6.81” (17.3cm) 11.36” (28.8cm) 15.90” (40.4cm) 20.44” (51.9cm) 27.26” (69.2cm)

Distance

3.9’ (1.2m) 9.8’ (3.0m) 16.4’ (5.0m) 23.0’ (7.0m) 29.5’ (9.0m) 39.4’ (12.0m)

This graph is for user’s reference only.

20

English

User Controls

Control Panel

Control Panel & Remote Control

There are two ways for you to control the functions:

Control Panel and Remote Control.

Using the Control Panel

Power/Standby

Refer to the “Power On/Off the Projector” section

on pages 16-17.

Menu

Press “Menu” to launch the on-screen display

(OSD) menu. To exit OSD, Press “Menu” again.

Enter

Conrm your item selection.

Source

Press “Source” to select an input signal.

Re-Sync

Automatically synchronizes the projector to the

input source.

Keystone /

Adjusts image distortion caused by tilting the

projector (±16 degrees)

Four Directional

Select Keys

Use to select items or make adjustments

to your selection.

Page is loading ...

Optoma EP763 User manual

Optoma EP763 User manual

Related papers

Other documents