Zebra WA6097 Owner's manual

Part No. 1050308 Revision A

April 12, 2007

Installation Instructions for Workabout Pro Open-Ended Case

1. Installation

Note: Installation of the Velcro Patches helps provide a better hold of the Workabout Pro handheld in the

Open Ended Case. Failure to use the Velcro Patches as shown may result in user injury or damage to the

Workabout Pro handheld. Velcro side will cling to the inside material of nylon case when case is closed.

1. Remove paper backing from Velcro Patch, avoid touching adhesive side as much as possible. See

Figure 1.

2. Affix adhesive side to Workabout Pro handheld in smooth flat area to ensure secure grip. Once Velcro

Patch is placed do not remove, this will be a permanent placement. See Figure 2.

Figure 1.

Figure 2.

Velcro Patches