Wells Manufacturing SS-4 User manual

Type
User manual

This manual is also suitable for

WELLS BLOOMFIELD, LLC
2 ERIK CIRCLE, P. O. Box 280 Verdi, NV 89439
telephone: 775-689-5707
fax: 775-689-5976
www.wellsbloomfield.com
p/n 305638 Rev. A ECN-13360 I 010 071023 cps
INSTALLATION INSTRUCTIONS
PART # 51878
NEW ELEMENT PAN USED ON
POTS WITH CENTER-STUD
Kit #51878 replaces all element pans used on Wells round
built-in warmer models SS-4, SS-8 and SS-10.
An ADAPTER is provided for use on older style non-drain pots with
center stud. To mount this element pan to pots with center-stud:
PREPARATION:
1. Disconnect appliance from electric power and allow to cool.
2. Disconnect electric supply from element. Remove and save
electrical inlet box.
3. Disconnect and save thermobulb and clips (if used).
4.
5. Remove existing element pan.
INSTALLATION:
1. Attach adapter to bottom of new element pan with the provided
screws and nuts. Center hole of adapter must be in the center
of the large hole in the element pan.
NOTE: Discard adapter when installing element pan on pots
with a drain, and on pots without a center stud.
2. Seat element in element bracket. Install element and bracket in
element pan.
3. Reinstall thermobulb and clips (if used).
4. Install element assembly on bottom of pot. The flat face of the
element must be toward the bottom of the pot.
5. Reattach electrical outlet box. Reconnect wiring.
6. Reconnect appliance to electrical power.
Test for proper operation.
010
Page 1 of 1
CAUTION:
SHOCK HAZARD
Disconnect appliance from electric
power before opening any access
panel.
CAUTION:
BURN HAZARD
Allow appliance to cool completely
before servicing.
Fig. 1 Element Pan Installation
ELEMENT
BRACKET
ELEMENT
ELEMENT
PAN
ADAPTER
ADAPTER
SCREW (2 pl)
ADAPTER
NUT (2 pl)
STUD NUT
POT STUD
THERMOBULB
CLIP (3 pl
when used)
  • Page 1 1

Wells Manufacturing SS-4 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI