Atlas Metal Industries MOR-18J Datasheet

Type
Datasheet

This manual is also suitable for

a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 Fax: (305) 623-0475
MOR
MOBILE OPEN RACK DISPENSER
MOR-1020
MOR2-1020
MOR-2020
MOR-18J
Project Name
N
O
# Item N
O
# Quantity
CONSTRUCTION:
The open frame construction of the model MOR
consistsof 1 “O.D. grade 18-8stainlesssteeltubing
welded to a grade 18-8 solid stainless steel upper
horizontal and vertical guide rods welded to the 1”
O.D. tubing. The base shall be reinforced with
heavy gauge full length stainless steel angles for
added strength. Supplied with empty rack guides
welded to the base.
RACK CARRIER: Shall be 16 gauge stainless steel
grade 18-8 #3 finish removable for cleaning.
SELF LEVELING: Elevators shall be stainless steel
die stamped telescoping tubing non-fatiguing
compression type springs stainless steel totally
enclosed.
CORNER BUMPERS: Shall be gray nonmarking
vinyl attached securely to the base.
CASTERS: Shall be 4” swivel heavy duty with
optional brake.
SPECIFICATIONS
“ALL PRICES AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE”
FOR HIGH VOLUME DISPENSING OF RACKS
FOR CAFETERIA AND TRAY MAKE-UP AREA
OPTIONS AND ACCESORIES
Wrap around bumpers
Locking casters (2)
Napkin dispensers
Dispensers available to fit other size racks
available upon request
13
MODEL MOR-1020
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 Fax: (305) 623-0475
14
MOR
MOBILE OPEN RACK DISPENSER
SPECIFICATIONS:
RACK CAPACITIES VARY WITH THE SIZE AND
TYPE OF RACKS USED.
*MODEL MOR2-1020 DISPENSES TWO
SEPARATE STACKS OF RACKS
BUMPERS ADD 1-3/4” TO L & W
SELF-LEVELING
CUP & GLASS
RACK DISPENSER
MER: MOBILE ENCLOSED RACK/DISPENSER
MODEL MAXIMUM RACK SIZE LENGTH WIDTH SHIPPING WEIGHT
MOR-1020 10-1/4” x 20-1/4” 22-1/4” x 15-3/8” 70 LBS.
*MOR2-1020 10-1/4” x 20-1/4” 23-1/2” x 25-3/8” 76 LBS.
MOR-2020 20-1/4” x 20-1/4” 22-1/4” x 25-3/8” 75 LBS.
MOR-18J 18” Diameter 22-1/8” x 23-3/8” 74 LBS.
MODEL MOR
10/07-SC
  • Page 1 1
  • Page 2 2

Atlas Metal Industries MOR-18J Datasheet

Type
Datasheet
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI