2. TOOLCRAFT
  3. TO-8204253
TO-8204253

TOOLCRAFT TO-8204253 User manual

  • I've reviewed the provided dismantling instructions for the LED work light model 2734751. This document provides a step-by-step guide on how to disassemble the device, including screw removal and wire desoldering. I am ready to answer any questions you may have about the dismantling process or the device itself.
  • What is the first step in dismantling the work light?
    How many screws need to be removed to open the lamp cover?
    What should be done after removing the lamp head?
1
Dismantling Instructions
Rechargable LED work light, 2500 LM
Item no: 2734751
1 Dismantling recommendations
■Disconnect from power supply.
■Ask help from a professional if needed.
2 Dismantling instructions
Step 1
Remove the 4 screws and open the back cover.
Step 2
Remove the 4 screws and open the handle.
Step 3
Disconnect the wire and take out the lamp head.
Step 4
Remove the 8 screws and open the lamp cover.
Step 5
Remove the 4 screws and open LED head.
Step 6
Desoldering the wire solder.
2
Step 7
Remove the 4 screws.
Step 8
Remove the PCB (PCB stick with thermal paste).
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2734751_V1_0623_hs_en 893545355 I1/O1 en
/