2. TOOLCRAFT
  3. 2522106

TOOLCRAFT 2522106 Operating instructions

  • Hello! I've reviewed the dismantling instructions for the BASETech LED Work Light, model SP-WLW10-01J. This document provides a step-by-step guide on how to safely disassemble the device, including steps for removing screws, desoldering cables, and extracting components. I'm ready to answer any questions you have about this process.
  • What is the first step in dismantling the LED work light?
    What should I do before starting the dismantling process?
    What is the last step of dismantling?
1
Dismantling Instructions
Rechargeable LED Work Light
Item no: 2522106
1 Dismantling recommendations
■Disconnect from power supply.
■Ask help from a professional if needed.
2 Dismantling instructions
Step 1
Remove 4x screws.
Step 2
Open the back shell.
Step 3
Desolder the cables from the battery.
Step 4
Desolder the cables from the PCB board.
Step 5
Remove the screws in the silver part.
Step 6
Take out the COB and PCB board.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2522106_V1_0622_hs_en 569276043 I1/O1 en
/