2. TOOLCRAFT
  3. WL1400
WL1400

TOOLCRAFT WL1400 User manual

  • Hello! I've reviewed the dismantling instructions for the Conrad Electronic WL1400 LED Work Light. The document provides step-by-step instructions on how to safely disassemble the device, including disconnecting it from the power, removing the casing screws, and carefully detaching the COB/SMD and PCB. I'm ready to assist you with any questions you may have about these instructions or the device itself.
  • What is the first step in dismantling the work light?
    How many screws should be removed from the back casing?
    How many screws need to be removed to take out the PCB?
1
Dismantling Instructions
WL1400 LED Work Light
Item no: 2481636
1 Dismantling recommendations
■Disconnect from power supply.
■Ask help from a professional if needed.
2 Dismantling instructions
Step 1
Overview.
Step 2
Remove 6x screws from back casing.
Step 3
Remove 2x screws and carefully remove COB and SMD.
Step 4
Remove 3x screws and carefully remove the PCB.
Step 6
Disassembled
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2481636_V1_0622_hs_en 9007199821912715 I2/O1 en
/