Rain Harvesting GSGO01 Installation guide

GSGO01
Brand
Rain Harvesting
Model
GSGO01
Type
Installation guide

Rain Harvesting GSGO01 is a round gutter outlet designed to improve water flow and extend the life of your gutters. By reducing snags and water pooling, it helps prevent mosquito breeding and decelerates water-related gutter corrosion. Suitable for flat bottom gutters with round downpipes, it comes in a 75mm size and is easy to install. Simply mark the size of the hole needed, cut it using snips or an appropriate tool, clean the area, apply silicone to the flange, and push the outlet up onto the gutter. Secure with a screw or rivet.

Rain Harvesting GSGO01 is a round gutter outlet designed to improve water flow and extend the life of your gutters. By reducing snags and water pooling, it helps prevent mosquito breeding and decelerates water-related gutter corrosion. Suitable for flat bottom gutters with round downpipes, it comes in a 75mm size and is easy to install. Simply mark the size of the hole needed, cut it using snips or an appropriate tool, clean the area, apply silicone to the flange, and push the outlet up onto the gutter. Secure with a screw or rivet.

Code
Size
Country
GSGO01
GSGO03
GSGO04
GSGO09
75mm
90mm
90mm
100mm
Australia
GSGO03
90mm
New Zealand
GSGO09
110mm
Europe
GSGO09
110mm
UK
Gutter Outlets
PRODUCT DETAILS
Our easy-install, below-the-gutter outlets improve
water flow and extend the life of your gutters. By
reducing snags and water pooling around your
outlets, they reduce opportunities for mosquitoes to
breed and decelerate water-related gutter corrosion.
The round versions are suitable for flat bottom
gutters with round downpipes.
Installation and Specification Guide
rainharvesting.com
Round
WHAT'S IN THE BOX? TOOLS/MATERIALS YOU MAY REQUIRE
GUTTER OUTLET
Gutter Outlet Marker pen
Tin snips
Silicone
Screw or rivet
Screwdriver or rivet gun
Drill
Masking tape
Installation
1 - For new installations, use the inside of your Gutter Outlet as a template to mark the size of the hole you
need to cut in the underside of your gutter.
2 - If replacing an existing gutter outlet, remove the existing outlet and check the size of the hole in the
underside of your gutter. If necessary, use the inside of your Gutter Outlet as a template to mark the new
hole you need to cut.
3 - Cut the hole for your new gutter outlet using snips or an appropriate tool.
4 - Clean the underside of your gutter around the hole.
5 - Apply silicone into the groove located on the gutter outlet flange and push the gutter outlet up onto
the underside of your gutter.
6 - Use a screw or rivet to secure your gutter outlet in place.
7 - You can now attach or re-attach your downpipe to the gutter outlet (note: if using tape to temporarily
secure your gutter outlet, take care not to disturb the bond until sealant dries).
Country
Code
A
B
C
D
Australia
GSGO01
75 M
85
96
41
GSGO03
90 F
95
113
42
GSGO04
90 M
91
147
60
GSGO09
100 M
115
130
58
New Zealand
GSGO03
90 F
95
113
42
Europe & UK
GSGO09
110 M
115
130
58
Product Specifications
Gutter Outlets
Round
rainharvesting.com
All dimensions are in mm unless otherwise stated.
Fitting guide:
F = Female / Socket Fitting
M = Male / Spigot Fitting (Pipe size)
IP = In-Pipe Fitting
A common misconception about collecting rainwater is that all you need is a
roof, a tank and some rain. This ‘tanking’ approach cannot always be relied on to
deliver the volume – or quality – of water that you require. That is where we can
help.
With some thought, your rain harvesting system can provide you with cleaner
water and lots of it. Whether you’re completely reliant on tank water or wanting
to keep the garden green, our simple steps will help you achieve your goal.
The Rain Harvesting approach to rainwater collection involves using tested and
proven products to make quality rainwater available for use in and around your
property. You don’t need much to get started and you will be surprised how
easy it is to get the most out of your rainwater system.
How can we help you?
DISCLAIMER This product specification is not a complete guide to product usage. Further information is available from Rain Harvesting Pty Ltd and from the installation and Operating
instructions. This specification sheet must be read in conjunction with the installation and Operating Instructions and all applicable statutory requirement. Product specifications may
change without notice. © Rain Harvesting Pty Ltd
rainharvesting.com
Maintenance
When properly installed, your gutter outlet should be maintenance-free.
COMPLIANCE
Australian Standard AS/NZS 4020:2005
(Testing of products for use in contact with drinking water)
For more information or to find out
how we can help, just give us a call on
+61 7 3248 9600
Or visit our website at
rainharvesting.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Rain Harvesting GSGO01 Installation guide

GSGO01
Brand
Rain Harvesting
Model
GSGO01
Type
Installation guide

Rain Harvesting GSGO01 is a round gutter outlet designed to improve water flow and extend the life of your gutters. By reducing snags and water pooling, it helps prevent mosquito breeding and decelerates water-related gutter corrosion. Suitable for flat bottom gutters with round downpipes, it comes in a 75mm size and is easy to install. Simply mark the size of the hole needed, cut it using snips or an appropriate tool, clean the area, apply silicone to the flange, and push the outlet up onto the gutter. Secure with a screw or rivet.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents