THUREN FABRICATION TF-RESMK-1322STD Installation guide

TF-RESMK-1322STD
Brand
THUREN FABRICATION
Model
TF-RESMK-1322STD
Type
Installation guide

THUREN FABRICATION TF-RESMK-1322STD front shock reservoir mounts are designed for 2013-2023 trucks. These mounts provide a secure and stable platform for mounting shock reservoirs, allowing for a more controlled and comfortable ride. The mounts are side-specific and easy to install, requiring only basic tools and some trimming of the fender liner. With their durable construction and precise fit, these mounts ensure optimal performance and protection for your shock reservoirs.

THUREN FABRICATION TF-RESMK-1322STD front shock reservoir mounts are designed for 2013-2023 trucks. These mounts provide a secure and stable platform for mounting shock reservoirs, allowing for a more controlled and comfortable ride. The mounts are side-specific and easy to install, requiring only basic tools and some trimming of the fender liner. With their durable construction and precise fit, these mounts ensure optimal performance and protection for your shock reservoirs.

warning
Note
Thuren fabrication
front shock reservoir mount
These instructions are applicable to the following:
• 2013 - 2023 Shock Reservoir Mounts
Applicable Part Numbers:
(TF-RESMK-1322STD)
Shock reservoir mounts are side specific; the mounting bolts will be to the rear of the truck
1. Removal Of Current Shock
• Remove hardware from top and bottom of shock
• Carefully remove shock from your truck (might have to compress shock a bit to remove)
2. Trim Fender Liner
19+ Trucks might have an additional gusset on the aft portion of the coil bucket (image 1). We recommend
grinding flush with the top of the coil bucket as to not interfere with the reservoir mount or reservoir itself.
• Fitting the shock reservoir and mount will require trimming the fender liner (image 1) it should not touch
the reservoir or hose once trimmed. It helps if the plastic fender liner is warm.
• Aquire a sharp/new Utility Knife, Leather Gloves, and Sharpie/Paint Pen.
• Mark area to be trimmed.
Feel behind fender liner for any wires or loose hoses and secure them out of the way so you don’t cut them
• Wear leather gloves and use a sharp utility knife to cut fender liner
3. Installation Of Reservoir Mount
• Line up mount to the flat side of the coil bucket, mark mounting locations for bolts and drill holes (image 2)
• Install mounts using ¼” bolts, torque Bolts to 8 ft/lbs
• Repeat for the other side
• Use existing hole in coil bucket gusset as first hole drilled for Res Mount Bracket on 19+ trucks
4. Installation of Shocks
• Put shock in place, Postion shock so the hose exit from the shock body is facing 45° to
the rear for proper hose positioning
• On our King 2.5” & 3.0” shocks the reservoir hose will point towards the cab so the hose
has a larger radius bend into the reservoir (image 2)
• Use 2 hose clamps per side to mount shock reservoir, run clamp through holes in mount
• Place Shocks Reservoir with Thuren decals facing outwards
• See Our Shock Install Instructions for Recommended Torques ----------------------------->
Image 1
GRIND
FLUSH
TRIM
Image 2
  • Page 1 1

THUREN FABRICATION TF-RESMK-1322STD Installation guide

TF-RESMK-1322STD
Brand
THUREN FABRICATION
Model
TF-RESMK-1322STD
Type
Installation guide

THUREN FABRICATION TF-RESMK-1322STD front shock reservoir mounts are designed for 2013-2023 trucks. These mounts provide a secure and stable platform for mounting shock reservoirs, allowing for a more controlled and comfortable ride. The mounts are side-specific and easy to install, requiring only basic tools and some trimming of the fender liner. With their durable construction and precise fit, these mounts ensure optimal performance and protection for your shock reservoirs.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents