Kuzco Lighting EB48538 User manual

Brand
Kuzco Lighting
Model
EB48538
Type
User manual

Kuzco Lighting EB48538 is an exterior bollard LED fixture designed for illuminating pathways, driveways, and other outdoor areas. It features a sturdy construction with a mounting base and a fixture head made of durable materials, ensuring longevity even in harsh weather conditions. The fixture comes with pre-wired LED modules, eliminating the need for separate bulbs, and is compatible with both ELV (Electronic Low Voltage) and TRIAC dimmers for adjustable brightness control. It operates on a wide voltage range of 120~277V, making it suitable for various electrical systems.

Kuzco Lighting EB48538 is an exterior bollard LED fixture designed for illuminating pathways, driveways, and other outdoor areas. It features a sturdy construction with a mounting base and a fixture head made of durable materials, ensuring longevity even in harsh weather conditions. The fixture comes with pre-wired LED modules, eliminating the need for separate bulbs, and is compatible with both ELV (Electronic Low Voltage) and TRIAC dimmers for adjustable brightness control. It operates on a wide voltage range of 120~277V, making it suitable for various electrical systems.

INSTALLATION SHEET
Exterior Bollard LED
START FROM HERE
• Make sure POWER is COMPLETELY OFF at the fuse box
• Have your fixture installed by a qualified licensed electrician
• Prepare everything in a clear area
• Wear gloves at all time during this installation
• Read instructions carefully before you start assembly
• Keep this installation sheet for future reference
Technical Support: 1-855-855-8926
Page 1 of 2
19054 28th Avenue Surrey, BC Canada V3Z 6M3
T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196
W: kuzcolighting.com
EB48538-UNV
20230109
Please Note:
• This Kuzco LED fixture comes with pre-wired LED module(s)
• Unless instructed, Do Not touch any part of the LED module(s) as any unnecessary
contact with the module could cause permanent damage
• For dimming, an ELV (Electronic Low Voltage) or TRIAC type of dimmer is required
• 120~277V input
Illustration 2
3a.
2b.
1d.
1b.
3b.
2a.
1a.
Illustration 1Illustration 1
1c. (M10 x 1.5mm
concrete anchor bolt)
1d.
1e
1.
2.
3.
4.
5.
6.
Remove fixture from its original package
Provide means to bring supply wiring to bollard in
accordance with local code before pouring concrete
Secure anchor bolts (1c) to mounting guide plate (1e) with
hex nuts and washers provided (1d) before concrete
cures (See Illustration 1)
After concrete is set, replace mounting guide plate (1e)
with mounting base (2b), adjust mounting base to desired
orientation and secure with hex nuts and washers (1d)
Pull conduit through base plate to make proper electrical
connection (black to hot “L”, white to neutral “N”, ground
to “GND”) with wire nuts (1b) provided in hardware
package, tie access wires to avoid contact with ground
Align interior bump on fixture base (3a) with slot on
mounting base (2b) (See Illustration 2), rotate to desired
orientation, and secure fixture base (3a) to mounting base
(2b) with screws (3b). Secure fixture head (1a) to fixture
base (3a) with screws (2a)
EB48538-UNV
INSTALLATION SHEET
Exterior Bollard LED
START FROM HERE
• Make sure POWER is COMPLETELY OFF at the fuse box
• Have your fixture installed by a qualified licensed electrician
• Prepare everything in a clear area
• Wear gloves at all time during this installation
• Read instructions carefully before you start assembly
• Keep this installation sheet for future reference
Technical Support: 1-855-855-8926
Page 2 of 2Page 2 of 2
19054 28th Avenue Surrey, BC Canada V3Z 6M3
T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196
W: kuzcolighting.com
Mounting Guide Template
20230109
Please Note:
• This Kuzco LED fixture comes with pre-wired LED module(s)
• Unless instructed, Do Not touch any part of the LED module(s) as any unnecessary
contact with the module could cause permanent damage
• For dimming, an ELV (Electronic Low Voltage) or TRIAC type of dimmer is required
• 120~277V input
Ø150mm
116mm
Ø12mm x 4
Ø50mm
  • Page 1 1
  • Page 2 2

Kuzco Lighting EB48538 User manual

Brand
Kuzco Lighting
Model
EB48538
Type
User manual

Kuzco Lighting EB48538 is an exterior bollard LED fixture designed for illuminating pathways, driveways, and other outdoor areas. It features a sturdy construction with a mounting base and a fixture head made of durable materials, ensuring longevity even in harsh weather conditions. The fixture comes with pre-wired LED modules, eliminating the need for separate bulbs, and is compatible with both ELV (Electronic Low Voltage) and TRIAC dimmers for adjustable brightness control. It operates on a wide voltage range of 120~277V, making it suitable for various electrical systems.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents