Quick
Installation Guide
150Mbps Wireless N USB Adapter
MODEL NO. TL-WN727N
Note: In Windows XP, a Found New Hardware Wizard window will appear when the adapter is detected. Please click Cancel.
7106506330 REV5.0.1
For more information, please visit our website: http://www.tp-link.com
Connect to a Computer
1
You can also download the driver and utility at www.tp-link.com.
A: Insert the CD and run the Autorun.exe from the pop-up
Autoplay window.
Note: In some operating systems, the CD screen will pop up automatically.
Otherwise, run the CD manually.
B: Select TL-WN727N and click Install Driver, then follow the InstallShield
Wizard to complete the installation.
Install Driver and Utility
2
Option 1: Directly Option 2: Via the USB Extension Cable
Join a Wireless Network
3
Option 2: Via TP-LINK Utility
Select your preferred wireless network from the utility window and click
Connect. The symbol indicates a successful connection.
Status WPS Network Profile Advanced
2 (2.4G)
5 (2.4G)
9 (2.4G)
None
WPA/WPA2-Personal
None
34567_TEST
abcdef_0903
AAAAAA
6 (2.4G)TP-LINK_A
Connect automatically
WPA/WPA2-Personal
Connect
34567_TEST
Network Na
TP-LINK_A
Option 3: Via Wi-Fi Protected Setup (WPS)
A: Press the WPS button on your router.
B: Within 2 minutes, press and hold the WPS button on the adapter until the
following screen appears.
C: When you are prompted “Successfully connected to the network by
WPS!”, click OK.
Configuring the wireless network.
Connecting to the network…
Setup Wizard
Browse CD
EXIT
TL-WR743ND
TL-WN727N
Install Driver
User Guide
©2016 TP-LINK
Note: The default setup type is Install Driver Only. You can later change to Install
TP-LINK Wireless Conguration Utility and Driver for more functions.
Option 1: Via Windows Wireless Utility
Click or (Network icon) on the taskbar, select your Wi-Fi network,
and click Connect.
Note: In Windows XP, if you have installed TP-LINK Utility, you need to close TP-LINK Utility
before using Windows Wireless Utility.