2. Axis
  3. D2050-VE

Axis D2050-VE User manual

  • Hello! I am an AI chatbot trained to assist you with the Axis D2050-VE User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
AXISD2050-VENetworkRadarDetector
UserManual
AXISD2050-VENetworkRadarDetector
TableofContents
Solutionoverview...........................................3
Productoverview...........................................4
Wheretoinstalltheproduct......................................4
Mountingdirection..............................................5
Mountingheight................................................5
Howtoaccesstheproduct....................................6
Howtoaccesstheproductfromabrowser...........................6
Aboutsecurepasswords..........................................6
Setup.....................................................8
Abouttheproduct'sbuilt-inhelp...................................8
Congurethedetector...........................................8
Howtocongurethedetector.....................................9
Howtoinstallmultipledetectors...................................9
Aboutevents...................................................9
Howtorecordvideofromacamerawhenmotionisdetected............10
Howtorecordradardatawhenmotionisdetected....................10
Howtoturnonalightwhenmotionisdetected......................11
HowtocontrolaPTZcamerawiththedetector.......................11
Aboutdetectionzones...........................................11
Howtominimizefalsealarms.....................................
12
Troubleshooting............................................14
Howtoresettofactorydefaultsettings.............................14
Howtocheckthecurrentrmware.................................
14
Howtoupgradethermware.....................................14
Technicalissues,cluesandsolutions................................
15
Performanceconsiderations.......................................
16
Specications..............................................17
SDcardslot....................................................
17
Buttons.......................................................
17
Connectors....................................................
17
Operatingconditions.............................................19
Powerconsumption..............................................19
2
AXISD2050-VENetworkRadarDetector
Solutionoverview
Solutionoverview
1
AXISD2050-VE
2
Fixeddomecamera
3
PTZcameraandilluminator
4
Doorcontroller
5
Surveillancecenter
3
AXISD2050-VENetworkRadarDetector
Productoverview
Productoverview
1
Relayconnector
2
Groundingscrew
3
Networkconnector
4
Radarmodule
5
Intrusionalarmswitch
6
Controlbutton
7
I/Oconnector
8
microSDcardslot
9
PowerLED
10
StatusLED
11
NetworkLED
Wheretoinstalltheproduct
Thedetectorisintendedformonitoringopenareas.Anysolidobject(suchasatreeorabush)inthecoverageareawillcreatea
blindspot(radarshadow)behindit.
Installthedetectoronapole,oronaspotonawallwheretherearenootherobjectsorinstallationsclosetoit.
Tobeabletocorrectlyidentifymovementinthecoveragearea,thedetectorneedstobeinstalledonastablemount.Donot
installthedetectoronaswayingpole.
Iftworadardetectorsofaremountedclosetogethertheymayinterferewitheachother,seeHowtoinstallmultipledetectorson
page9.
Attherecommendedmountingheight,theneardetectionlimitis4.5m(15ft).
Iftherearealotofmetalobjectsintheeldofviewtherewillbealotofreectionsimpactingtheperformance.
Note
Donotrepaintthedetector.Thepaintmayseriouslyimpactthedetector’sperformance.
4
AXISD2050-VENetworkRadarDetector
Productoverview
Mountingdirection
Thedetectorcoversanangleof±60°fromitscentralaxis.Thismeansthatifyoumountitonawallthereisablindspottoeach
sideofthedetector.
Tocoverthewallyoucanmovetheradarmoduleinsidethedetector.
1
-25°mountingdirection
2
0°mountingdirection
3
25°mountingdirection
Mountingheight
Foroptimalperformance,installthedetector3.5m(1 1ft)aboveground.
Note
Ifyouinstallthedetectoratadifferentheight,entertheactualmountingheightintheproduct’swebpagesbefore
calibratingtheradar.
Thefollowingtableshowsthedetectionrangeatdifferentmountingheightswhendetectinga1.8m(6ft)tallpersonwalking.
Mountingheight
3.5m(11ft)4m(13ft)4.5m(15ft)5m(16ft)
Neardetectionlimit
4.5m(15ft)6m(20ft)7m(23ft)8.5m(28ft)
Fardetectionlimit(max.values)49m(161ft)51m(167ft)51m(167ft)52m(171ft)
5
AXISD2050-VENetworkRadarDetector
Howtoaccesstheproduct
Howtoaccesstheproduct
AXISIPUtilityandAXISDeviceManagerarerecommendedmethodsforndingAxisproductsonthenetworkandassigningthemIP
addressesinWindows®.Bothapplicationsarefreeandcanbedownloadedfromaxis.com/support
Theproductcanbeusedwiththefollowingbrowsers:
•Windows
®
:Chrome
TM
(recommended),Firefox
®
,Edge
®
,orOpera
®
•OSX
®
:Chrome
TM
(recommended)orSafari
®
•Otheroperatingsystems:Chrome
TM
orFirefox
®
.
Ifyouneedmoreinformationaboutrecommendedbrowsers,gotoaxis.com/browser-support
Howtoaccesstheproductfromabrowser
1.Startawebbrowser.
2.EntertheIPaddressorhostnameoftheAxisproductinthebrowser’saddresseld.
ToaccesstheproductfromaMaccomputer(OSX),gotoSafari,clickonBonjourandselecttheproductfromthe
drop-downlist.ToaddBonjourasabrowserbookmark,gotoSafari>Preferences.
IfyoudonotknowtheIPaddress,useAXISIPUtilitytolocatetheproductonthenetwork.Forinformationabout
howtodiscoverandassignanIPaddress,seethedocumentHowtoassignanIPaddressandaccessyourdeviceonthe
productpageataxis.com.
3.Enteryourusernameandpassword.Ifthisisthersttimetheproductisaccessed,therootpasswordmustrstbe
congured.
4.Theproduct’sliveviewpageopensinyourbrowser.
Aboutsecurepasswords
Important
Axisdevicessendtheinitiallysetpasswordincleartextoverthenetwork.Toprotectyourdeviceaftertherstlogin,set
upasecureandencryptedHTTPSconnectionandthenchangethepassword.
Thedevicepasswordistheprimaryprotectionforthedataandservices.Axisdevicesdonotimposeapasswordpolicyastheymaybe
usedinvarioustypesofinstallations.Toprotectyourdatawerecommendthatyou:
•Changethedefaultpasswordthatcomeswitheachdevice.
•Useapasswordwithatleast8characters,preferablycreatedbyapasswordgenerator.
•Don’texposethepassword.
•Changethepasswordatarecurringinterval,atleastonceayear.
Setasecurepasswordfortherootaccount
Important
Thedefaultadministratorusernameisroot.Ifthepasswordforrootislost,resetthedevicetofactorydefaultsettings.
1.Typeapassword.Followtheinstructionsaboutsecurepasswords.SeeAboutsecurepasswordsonpage6.
2.Retypethepasswordtoconrmthespelling.
6
AXISD2050-VENetworkRadarDetector
Howtoaccesstheproduct
3.ClickCreatelogin.Thepasswordhasnowbeencongured.
7
AXISD2050-VENetworkRadarDetector
Setup
Setup
Abouttheproduct'sbuilt-inhelp
Youcanaccessthebuilt-inhelpfromtheproduct’swebpage.Thehelpprovidesmoredetailedinformationontheproduct’s
featuresandtheirsettings.
Congurethedetector
Thedetectorisreadytouseassoonasitisinstalled.Thedefaultliveviewwillshowtheradarcoverageandanydetectedmovement,
andyoucanadddetectionzonesandactionrulesrightaway.
Tomakeiteasiertoseewhereobjectsaremoving,youcanuploadareferencemap,forexampleagroundplanoranaerialphoto,
thatshowstheareacoveredbytheradardetector.
8
AXISD2050-VENetworkRadarDetector
Setup
Imagerequirements:
•Supportedleformatsarejpegandpng.
•Useanimagewiththesameproportions(16:9)orresolution(1920x1080)astheliveview.Iftheimageissmalleritwillbe
scaledtotthewindow.Iftheproportionsarewrong,theimagewillnotlltheentirevideostream.
•Croptheimagetotthecoverageoftheradarascloselyaspossiblebeforeuploadingit.
•Theorientationisnotimportant,sincetheradarcoverageshapewillbemovedtoadapttotheimageduringcalibration.
Afteruploadingthereferencemapyouneedtocalibratetheradarsothattheactualradarcoveragetstheposition,directionand
scaleofthereferencemap.
Therearetwomethodsforcalibratingthereferencemap:
•Calibrationusingpins:Thecalibrationisperformedinthewebinterfacebydroppingpinsinknowlocationsinthe
referencemapandsettingthedistancebetweenthepins.
Whencalibratingusingpins,youneedtoselectthemountingpositionoftheradarmoduleinsidethedetector.
•Calibrationusingtracks:Thecalibrationmethodrequiresapersontomoveinfrontoftheradar.
Youcandothisyourselfwhileaccessingthewebinterfacefromamobiledevice,orhavesomeoneelsemoveand
followyourinstructions.
Whenmovingaroundinthedifferentsteps,movetoplacesthatareeasytondinthereferencemap.
Howtocongurethedetector
1.Touploadareferencemap,gotoSettings>Radar>Referencemap.SelectBrowsetondanimagele,andselect
Uploadtoplacetheimageintheliveview.
2.Tocalibratethereferencemap,gotoSettings>Radar>Referencemapcalibration.SelectStartcalibrationand
followtheinstructions.
Howtoinstallmultipledetectors
Iftworadardetectorsofaremountedclosetogethertheymayinterferewitheachother.Toavoidproblems,selectdifferent
channelsforthedetectors.
1.GotoSettings>Radar>GeneralandselectChannel.
Aboutevents
Theeventpagesallowyoutocongureyourproducttoperformactionswhendifferenteventsoccur.Forexample,theproduct
canstartarecordingorsendanemailnoticationwhenmotionisdetected.Thesetofconditionsthatdeneshowandwhen
theactionistriggerediscalledanactionrule.
9
AXISD2050-VENetworkRadarDetector
Setup
Howtorecordvideofromacamerawhenmotionisdetected
ThisexampleexplainshowtosetupthedetectorandacamerasothatthecamerastartsrecordingtotheSDcardveseconds
beforethedetectordetectsmotionandtostoponeminuteafter.
Connectthedevices:
1.ConnectacablefromanI/OoutputonthedetectortoanI/Oinputonthecamera.
ConguretheI/Oportofthedetector:
2.GotoSettings>System>I/OportsandconguretheI/Oportasanoutputandselectthenormalstate.
Createanactionruleinthedetector:
3.GotoSettings>System>Eventsandaddanactionrule.
4.Typeanamefortheactionrule.
5.Fromthelistoftriggers,selectDetectorsandthenselectoneoftheRMD(RadarMotionDetection)includezones.Toset
upanincludezone,seeAddanincludezoneonpage12
6.Fromthelistofactions,selectOutputPortandthenselecttheportthatisconnectedtothecamera.
7.SettheDurationtoGotooppositestatewhentheruleisnolongeractive.
8.ClickOk.
ConguretheI/Oportofthecamera:
9.GotoSettings>System>I/OportsandconguretheI/Oportasaninputandselectthenormalstate.
Createanactionruleinthecamera:
10.GotoSettings>System>Eventsandaddanactionrule.
11.Typeanamefortheactionrule.
12.Fromthelistoftriggers,selectDigitalInputPortandthenselecttheportthatshouldtriggertherule.
13.Fromthelistofactions,selectRecordvideo.
14.Selectanexistingstreamproleorcreateanewone.
15.Setthepre-triggertimeto5seconds.
16.Setthepost-triggertimeto60seconds.
17.SelectSDcardfromthelistofstorageoptions.
18.ClickOk.
Howtorecordradardatawhenmotionisdetected
ThisexampleexplainshowtosetupthedetectortostartrecordingtotheSDcardvesecondsbeforeitdetectsmotionandto
stoponeminuteafter.
Therecordingwillshowthereferencemapwiththetrailofthemovingobject.
Createanactionrule:
1.GotoSettings>System>Eventsandaddanactionrule.
2.Typeanamefortheactionrule.
10
AXISD2050-VENetworkRadarDetector
Setup
3.Fromthelistoftriggers,selectDetectorsandthenselectoneoftheRMD(RadarMotionDetection)includezones.Toset
upanincludezone,seeAddanincludezoneonpage12
4.Fromthelistofactions,selectRecordvideo.
5.Selectanexistingstreamproleorcreateanewone.
6.Setthepre-triggertimeto5seconds.
7.Setthepost-triggertimeto60seconds.
8.SelectSDcardfromthelistofstorageoptions.
9.ClickOk.
Howtoturnonalightwhenmotionisdetected
Turningonalightwhenanintruderentersthedetectionzonecanhaveadeterringeffect,andwillalsoimprovetheimagequalityof
avisualcamerarecordingtheintrusion.
Thisexampleexplainshowtosetupthedetectorandanilluminatorsothattheilluminatorturnsonwhenthedetectordetects
motionandturnsoffafteroneminute.
Connectthedevices:
1.Connectoneoftheilluminatorcablestothepowersupplyviatherelayportonthedetector.Connecttheothercable
directlybetweenthepowersupplyandtheilluminator.
Conguretherelayportofthedetector:
2.GotoSettings>System>I/OportsandselectOpencircuitasthenormalstate.
Createanactionruleinthedetector:
3.GotoSettings>System>Eventsandaddanactionrule.
4.Typeanamefortheactionrule.
5.Fromthelistoftriggers,selectDetectorsandthenselectoneoftheRMD(RadarMotionDetection)includezones.Toset
upanincludezone,seeAddanincludezoneonpage12
6.Fromthelistofactions,selectOutputPortandthenselecttherelayport.
7.SelectActive.
8.SettheDurationtoGotooppositestateafter1minute.
9.ClickOk.
HowtocontrolaPTZcamerawiththedetector
Itispossibletousetheinformationaboutobjects’positionsfromthedetectortomakeaPTZcameratrackobjects.
Todothis,installtheapplicationAXISRadarAutotrackingforPTZonyourVMSserver(oranothercomputerwithaccesstoboththe
cameraandthedetector),andfollowtheinstructionsintheapplication.
TodownloadAXISRadarAutotrackingforPTZ,gotoaxis.com
Aboutdetectionzones
Todeterminewheretodetectmotion,youcanaddmultiplezones.Differentzonescanbeusedtotriggerdifferentactions.
11
AXISD2050-VENetworkRadarDetector
Setup
Therearetwotypesofzones:
•Anincludezoneisanareainwhichmovingobjectswilltriggeractionrules.Thedefaultincludezonematchesthe
entireareacoveredbythedetector.
•Anexcludezoneisanareainwhichmovingobjectswillbeignored.Useexcludezonesifthereareareasinsideaninclude
zonethattriggeralotofunwantedalarms.
Addanincludezone
1.GotoSettings>RMDzonesandclick
2.SelectIncludezone.
3.Select
tomodifythesettingsofthezone.Formoreinformation,seetheproduct’sbuiltinhelp.
4.Modifytheshapeoftheincludezone,seeModifyadetectionzoneonpage12
Addanexcludezone
1.GotoSettings>RMDzonesandclick
2.SelectExcludezone.
3.Modifytheshapeoftheexcludezone,seeModifyadetectionzoneonpage12
Modifyadetectionzone
Usethemousetomoveandshapethezonesothatitcoversthedesiredpartofthereferencemap.
•Toaddanewcorner,clickonthezoneborder.Dragthecornertothedesiredposition.
•Toremoveacorner,right-clickonthecorner.
•Tomoveacorner,clickanddragthecornertothenewposition.
•Tomovethezone,placethepointerinsidethezoneanddragthezonetothenewposition.
Howtominimizefalsealarms
Ifyounoticethatyougettoomanyfalsealarms,youcanlteroutcertaintypesofmovementorobjects,orchangethecoverage.
Testwhichsettingworksbestforyourenvironment.
•Modifytheincludeandexcludezones:
Iftheincludezoneincludeshardsurfaces,suchasametalwall,theremaybereectionsthatcausesmultipledetectionsfor
asinglephysicalobject.Inthiscase,modifytheincludezone,seeModifyadetectionzoneonpage12,oraddanexclude
zonethatmaskseverythingbehindthesurface,seeAddanexcludezoneonpage12
•Filteronmovement:
GotoSettings>Radar>DetectionandselectIgnoreswayingobjects.Thissettingwillminimizefalsealarmsfromtrees,
bushes,andagpolesinthecoveragezone.
•Filterontime:
GotoSettings>RMDzonesandselectazonetomodifyit’ssettings.
EnableShort-livedobjectandsetadelaytimefromwhentheradarstartstrackinganobjectuntilitcantriggerandalarm.
Thetimerstartswhentheradarrstdetectstheobject,notwhentheobjectenterstheincludezone.
12
AXISD2050-VENetworkRadarDetector
Setup
•Filteronobjecttype:
Thedetectorwillclassifyobjectsdependingontheradarechothattheyproduce.Ifitcan’tdeterminetheobjecttype,
theobjectwillbeclassiedasUnidentied.
GotoSettings>RMDzonesandselectazonetomodifyit’ssettings.
Toavoidtriggeringonspecicobjecttypes,enablethelteranddeselecttheobjecttypesthatshouldnottriggerevents
inthiszone.
13
AXISD2050-VENetworkRadarDetector
Troubleshooting
Troubleshooting
Ifyoucan’tndwhatyou’relookingforhere,trythetroubleshootingsectionataxis.com/support
Howtoresettofactorydefaultsettings
Important
Resettofactorydefaultshouldbeusedwithcaution.Aresettofactorydefaultresetsallsettings,includingtheIPaddress,to
thefactorydefaultvalues.
Note
ThecamerahasbeenpreconguredwithAXISLicensePlateVerier.Ifyouresettofactorydefault,youneedtoreinstall
thelicensekey.See.
Toresettheproducttothefactorydefaultsettings:
1.Disconnectpowerfromtheproduct.
2.Pressandholdthecontrolbuttonwhilereconnectingpower.SeeProductoverviewonpage4.
3.Keepthecontrolbuttonpressedfor15–30secondsuntilthestatusLEDindicatorashesamber.
4.Releasethecontrolbutton.TheprocessiscompletewhenthestatusLEDindicatorturnsgreen.Theproducthasbeenreset
tothefactorydefaultsettings.IfnoDHCPserverisavailableonthenetwork,thedefaultIPaddressis192.168.0.90
5.UsetheinstallationandmanagementsoftwaretoolstoassignanIPaddress,setthepassword,andaccessthevideostream.
Theinstallationandmanagementsoftwaretoolsareavailablefromthesupportpagesonaxis.com/support
Itisalsopossibletoresetparameterstofactorydefaultthroughthewebinterface.GotoSettings>System>Maintenanceand
clickDefault.
Howtocheckthecurrentrmware
Firmwareisthesoftwarethatdeterminesthefunctionalityofnetworkdevices.Oneofyourrstactionswhentroubleshootinga
problemshouldbetocheckthecurrentrmwareversion.Thelatestversionmaycontainacorrectionthatxesyourparticular
problem.
Tocheckthecurrentrmware:
1.Gototheproduct’swebpage.
2.Clickonthehelpmenu.
3.ClickAbout.
Howtoupgradethermware
Important
Preconguredandcustomizedsettingsaresavedwhenthermwareisupgraded(providedthatthefeaturesareavailablein
thenewrmware)althoughthisisnotguaranteedbyAxisCommunicationsAB.
Important
Makesuretheproductremainsconnectedtothepowersourcethroughouttheupgradeprocess.
14
AXISD2050-VENetworkRadarDetector
Troubleshooting
Note
Whenyouupgradetheproductwiththelatestrmware,theproductreceivesthelatestfunctionalityavailable.Alwaysread
theupgradeinstructionsandreleasenotesavailablewitheachnewreleasebeforeupgradingthermware.Tondthelatest
rmwareandthereleasenotes,gotoaxis.com/support/rmware
1.Downloadthelatestrmwareletoyourcomputer,availablefreeofchargeataxis.com/support/rmware
2.Logintotheproductasanadministrator.
3.GotoSettings>System>Maintenance.Followtheinstructionsonthepage.Whentheupgradehasnished,the
productrestartsautomatically.
Technicalissues,cluesandsolutions
Ifyoucan’tndwhatyou’relookingforhere,trythetroubleshootingsectionataxis.com/support
Problemsupgradingthermware
FirmwareupgradefailureIfthermwareupgradefails,theproductreloadsthepreviousrmware.Themostcommonreason
isthatthewrongrmwarelehasbeenuploaded.Checkthatthenameofthermwarele
correspondstoyourproductandtryagain.
ProblemssettingtheIPaddress
Theproductislocatedona
differentsubnet
IftheIPaddressintendedfortheproductandtheIPaddressofthecomputerusedtoaccessthe
productarelocatedondifferentsubnets,youcannotsettheIPaddress.Contactyournetwork
administratortoobtainanIPaddress.
TheIPaddressisbeingused
byanotherdevice
DisconnecttheAxisproductfromthenetwork.Runthepingcommand(inaCommand/DOS
window,typepingandtheIPaddressoftheproduct):
•Ifyoureceive:Replyfrom<IPaddress>:bytes=32;time=10...
thismeansthattheIPaddressmayalreadybeinusebyanotherdeviceonthenetwork.
ObtainanewIPaddressfromthenetworkadministratorandreinstalltheproduct.
•Ifyoureceive:Requesttimedout,thismeansthattheIPaddressisavailable
forusewiththeAxisproduct.Checkallcablingandreinstalltheproduct.
PossibleIPaddressconict
withanotherdeviceonthe
samesubnet
ThestaticIPaddressintheAxisproductisusedbeforetheDHCPserversetsadynamicaddress.
ThismeansthatifthesamedefaultstaticIPaddressisalsousedbyanotherdevice,theremay
beproblemsaccessingtheproduct.
Theproductcannotbeaccessedfromabrowser
Cannotlogin
WhenHTTPSisenabled,ensurethatthecorrectprotocol(HTTPorHTTPS)isusedwhenattempting
tologin.Youmayneedtomanuallytypehttporhttpsinthebrowser’saddresseld.
Ifthepasswordfortheuserrootislost,theproductmustberesettothefactorydefaultsettings.
SeeHowtoresettofactorydefaultsettingsonpage14.
TheIPaddresshasbeen
changedbyDHCP
Theproductisaccessiblelocallybutnotexternally
Routerconguration
CheckthatyourrouterallowsincomingdatatrafctotheAxisproduct.Theroutermustsupport
UPnP
®
.
Firewallprotection
ChecktheInternetrewallwithyournetworkadministrator.
15
AXISD2050-VENetworkRadarDetector
Troubleshooting
Performanceconsiderations
Whensettingupyoursystem,itisimportanttoconsiderhowvarioussettingsandsituationsaffecttheperformance.Somefactors
affecttheamountofbandwidth(thebitrate)required,otherscanaffecttheframerate,andsomeaffectboth.Iftheloadonthe
CPUreachesitsmaximum,thisalsoaffectstheframerate.
Thefollowingfactorsarethemostimportanttoconsider:
•Highimageresolutionorlowercompressionlevelsresultinimagescontainingmoredatawhichinturnaffectsthe
bandwidth.
•RotatingthelensmanuallywillresultinbetterperformancecomparedtorotatingtheimagefromtheGUI.
•AccessbylargenumbersofMotionJPEGorunicastH.264clientsaffectsthebandwidth.
•Simultaneousviewingofdifferentstreams(resolution,compression)bydifferentclientsaffectsbothframerateand
bandwidth.
Useidenticalstreamswhereverpossibletomaintainahighframerate.Streamprolescanbeusedtoensurethat
streamsareidentical.
•AccessingMotionJPEGandH.264videostreamssimultaneouslyaffectsbothframerateandbandwidth.
•Heavyusageofeventsettingsaffectstheproduct’sCPUloadwhichinturnaffectstheframerate.
•UsingHTTPSmayreduceframerate,inparticularifstreamingMotionJPEG.
•Heavynetworkutilizationduetopoorinfrastructureaffectsthebandwidth.
•Viewingonpoorlyperformingclientcomputerslowersperceivedperformanceandaffectsframerate.
•RunningmultipleAXISCameraApplicationPlatform(ACAP)applicationssimultaneouslymayaffecttheframerateand
thegeneralperformance.
16
AXISD2050-VENetworkRadarDetector
Specifications
Specifications
Tondthelatestversionoftheproduct’sdatasheet,gototheproductpageataxis.comandlocateSupport&Documentation.
LEDIndicators
StatusLED
Indication
GreenSteadygreenfornormaloperation.
Amber
Steadyduringstartup.Flasheswhenrestoringsettings.
NetworkLEDIndication
Green
Steadyforconnectiontoa100Mbit/snetwork.Flashesfornetworkactivity.
Amber
Steadyforconnectiontoa10Mbit/snetwork.Flashesfornetworkactivity.
UnlitNonetworkconnection.
PowerLEDIndication
Green
Normaloperation.
Amber
Flashesgreen/amberduringrmwareupgrade.
SDcardslot
ForSDcardrecommendations,seeaxis.com
microSD,microSDHC,andmicroSDXCLogosaretrademarksofSD-3CLLC.microSD,microSDHC,microSDXCare
trademarksorregisteredtrademarksofSD-3C,LLCintheUnitedStates,othercountriesorboth.
Buttons
Controlbutton
Forlocationofthecontrolbutton,seeProductoverviewonpage4.
Thecontrolbuttonisusedfor:
•Resettingtheproducttofactorydefaultsettings.Seepage14.
•ConnectingtoanAXISVideoHostingSystemservice.See.Toconnect,pressandholdthebuttonforabout3seconds
untiltheStatusLEDashesgreen.
Connectors
Networkconnector
RJ45EthernetconnectorwithPoweroverEthernetPlus(PoE+).
I/Oconnector
UsetheI/Oconnectorwithexternaldevicesincombinationwith,forexample,motiondetection,eventtriggering,andalarm
notications.Inadditiontothe0VDCreferencepointandpower(DCoutput),theI/Oconnectorprovidestheinterfaceto:
17
AXISD2050-VENetworkRadarDetector
Specifications
Digitalinput-Forconnectingdevicesthatcantogglebetweenanopenandclosedcircuit,forexamplePIRsensors,door/window
contacts,andglassbreakdetectors.
Digitaloutput-ForconnectingexternaldevicessuchasrelaysandLEDs.ConnecteddevicescanbeactivatedbytheVAPIX®
ApplicationProgrammingInterfaceorfromtheproduct’swebpage.
6-pinterminalblock
FunctionPinNotes
Specications
DCground
1
0VDC
DCoutput
2
Canbeusedtopowerauxiliaryequipment.
Note:Thispincanonlybeusedaspowerout.
12VDC
Maxload=50mA
Digitalinput–Connecttopin1toactivate,orleaveoating
(unconnected)todeactivate.
0tomax30VDC Congurable
(InputorOutput)
3–6
Digitaloutput–Connecttopin1toactivate,orleaveoating
(unconnected)todeactivate.Ifusedwithaninductiveload,e.g.,a
relay,connectadiodeinparallelwiththeload,toprotectagainst
voltagetransients.
0tomax30VDC,opendrain,
100mA
Example
1
DCground
2
DCoutput12V,max50mA
3
I/Oconguredasinput
4
I/Oconguredasoutput
5
CongurableI/O
6
CongurableI/O
Relayconnector
18
AXISD2050-VENetworkRadarDetector
Specifications
CAUTION
Usesinglecorewiresfortherelayconnector.
Function
Specications
TypeNormallyopen
Rating
24VDC
Max.current5A
Isolationfromothercircuitry2.5kV
Electricalendurance
24VDC,25000operationsat+70°C(158°F)
Operatingconditions
Product
Classication
TemperatureHumidity
AXISD2050-VEIEC60529IP66
NEMA250Type4X
-40°Cto60°C
(-40°Fto140°F)
10–100%RH(condensing)
Powerconsumption
NO NO
NO
TICE TICE
TICE
UseaSafetyExtraLowVoltage(SELV)compliantlimitedpowersource(LPS)witheitheraratedoutputpowerlimited
to≤100Woraratedoutputcurrentlimitedto≤5A.
ProductPoweroverEthernetPower
AXISD2050-VEIEEE802.3at,Type2Class4
Typical9W
Max.15W
19
UserManualVer.M3.4
AXISD2050-VENetworkRadarDetector
Date:June2018
©AxisCommunicationsAB,2017-2018
PartNo.T10099502
/