EASY START GUIDE
The following items are included in your Aztech PSD500 package.
Package Contents
Device Overview
Device Setup
A
B
C
Aztech
PSD500
Micro USB
Power
Adapter
Ethernet
Cable
Easy Start
Guide
Power Button
Network LED
Power LED
WAN Port
Reset Button
USB Port
Micro USB
Port
Name Description
Power
Button
• Press this button to turn ON the device.
• Press and hold to turn OFF the device .
Network
LED
Blue
OFF Device is not connected to the Internet.
ON Device has successfully connected to the Internet.
Power
LED
Green
Blinking Device is initializing / booting.
ON Device has finished initializing / booting.
WAN Port Using an Ethernet cable, connect this port to your router’s Ethernet port.
Reset
Button
Press this button for three (3) seconds to reset the device to its factory default
settings.
USB
Port
Connect your flash / hard disk drive to this port.
Micro USB
Port
Connect the Micro USB Power Adapter to this port.
To set up your device, simply follow the steps provided below. A diagram
has also been provided for reference.
1. Connect your External Hard Disk Drive (HDD) or USB Storage to
the USB Port of your PSD500.
2. Connect your Aztech PSD500 to your router using an Ethernet
cable.
3. Connect the Micro USB Power Adapter to the Micro USB port of
your Aztech PSD500 and plug it into a power outlet.
4. Press the Power button of your Aztech PSD500 to turn it ON.
5. Download & install the Aztech Storage application from the App
Store or Playstore then launch the installed application.
• WARNING: The Aztech Storage app requires Wi-Fi / 3G / 4G Data
connectivity. In using your data plan, standard data rates will apply.
• The Aztech PSD500 Personal Storage Dongle is highly recommended for
Fibre Broadband Subscribers
• 20Mbps is the recommended bandwidth for (a) PSD500 to router
connectivity and (b) in using the Aztech Storage application.
IMPORTANT NOTES :
Aztech Storage
Router
PSD500
IP Cameras
USB
CABLE
ETHERNET
CABLE
HDD
Upload, Download
or access your
External HDD’s
videos, audios, &
other files
Have your Aztech
IP cameras record
directly on your
External HDD
1
2
4
3
5
Warranty
Policy
This Easy Start Guide is also downloadable from our Aztech
Support Website (www.aztech.com/support).
PLEASE KEEP THIS EASY START GUIDE FOR FUTURE USE
PSD500
Personal Storage
Dongle
EASY START GUIDE
The Aztech Storage Application
D
To access an attached external storage, you need to add your Aztech
PSD500 first on the Aztech Storage application.
A. To add your Aztech PSD500 device on your Aztech Storage app:
1. On the Home page, tap the button to
begin adding your Aztech PSD500 device.
2. Press the QR Code button and scan the QR
Code of your PSD500.
3. Enter your Aztech PSD500’s Password
(default Password is admin) and assign a
Name for your device (e.g. Dongle 1).
4. Press Confirm to add your Aztech PSD500.
You may now download or view any of the
connected external storage’s files.
ADDITIONAL NOTES :
• The Aztech PSD500 only supports
Aztech WIPC408HD, WIPC409HD, and
WIPC410 Enhanced HD IP cameras.
• Ensure that your camera’s settings are
configured.
• You may use a camera connected
to a different network, granted that
this camera is (a) any of the models
mentioned above, and (b) that you have
properly configured its settings.
Storage Location: sda1/CameraRecord
Record Time: Full Time
3
4
B. To view / download files from your External HDD:
1. On Home, select the Aztech PSD500 device
(e.g. Psd 1) where you want your IP cameras
to directly record on.
1. On Home, tap the PSD500 device that you
want to access (e.g. Dongle 1) then tap the
connected storage (e.g. BD1).
1
3
2
C. To upload files on your External HDD:
1. On the folder that you want to upload your
files on, tap , then tap Upload here.
D. (OPTIONAL) To add your Aztech IP Cameras :
2. Press the button, scan the QR code
of your Aztech IP Camera, correctly enter its
password, then press Confirm.
3. Ensure to set the following camera settings
below:
4. Click Save to apply settings. Your Aztech IP
Camera’s video feeds will now automatically
record on Aztech PSD500’s external storage.
2
2. Locate and tap the file that you need to view
/ stream / download.
3. To download any of your external storage’s
files, long press any of the files, tick the
file(s) that you want to download, then press
the Download button
1
1
2
3
2. Select the file type and tick the files that you
want to upload then tap Upload.
1
2
2
2
4
As an optional feature, you may also use your Aztech PSD500’s external
storage as a video recording storage of your Aztech IP Cameras.
1
2
PSD500
Personal Storage
Dongle
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Aztech FG7003GRV-AC Owner's manual
-
-
-
-
Aztech DSL5018EN User manual
-
-
-
-
-
Aztech DSL7000GR User manual
