AMT AMT662 Assembly Instructions

AMT
Brand
AMT
Model
AMT662
Type
Assembly Instructions

AMT AMT662

This highly-detailed kit features precision-tooled parts for ease of assembly. It has been designed to assemble via snap assembly. The kit can also be glued together if desired. It is recommended to apply paint and decals to sub-assemblies before completing final assembly.

The kit includes extensive water slide decals. The large areas of aztec paneling decals are applied first, allowed to dry, and a second set of smaller decals (primarily marking decals) are placed on top. These decals are compatible with setting solution which can be applied to conform around surface details.

AMT AMT662

This highly-detailed kit features precision-tooled parts for ease of assembly. It has been designed to assemble via snap assembly. The kit can also be glued together if desired. It is recommended to apply paint and decals to sub-assemblies before completing final assembly.

The kit includes extensive water slide decals. The large areas of aztec paneling decals are applied first, allowed to dry, and a second set of smaller decals (primarily marking decals) are placed on top. These decals are compatible with setting solution which can be applied to conform around surface details.

Special thanks to E. James Small for developing the aztec decals included in this kit.
For excellence in model building, visit his web site at
smallartworks.ca
AMT is a registered trademark of Learning Curve Brands, Inc. used under license to Round 2, LLC. © 2010 Learning Curve Brands, Inc. All rights reserved.
TM,
®
& © 2010 CBS Studios Inc. All rights reserved. STAR TREK and related marks are trademarks of CBS Studios Inc. © 2010 Paramount Pictures Corp. All rights reserved.
© 2010 Round 2, LLC South Bend, IN 46628 USA. Product and packaging designed in the USA. Made in China. All rights reserved.
GENERAL ASSEMBLY:
This highly-detailed kit features precision-tooled
parts for ease of assembly. Care and patience must be exercised to achieve
optimal results. The kit has been designed to assemble via snap assembly.
GLUE ASSEMBLY:
If a modeler chooses to glue their model, it is
recommended that the instructions be examined carefully before
applying cement. You will find this very helpful, as it will allow you to gain a
clear understanding of how the parts fit together in order to best plan painting
and final assembly. If doing a test fit, scraping the attachment pins with a knife
blade may be beneficial to separate parts before re-assembling with glue.
SUB-ASSEMBLIES:
Note that this kit is intended to be built in
sub-assemblies. This makes building the kit far more manageable. It is very
important to note that it can be extremely advantageous to apply paint and
decals to sub-assemblies before completing final assembly.
DECALS & PAINT:
This kit includes extensive water slide decals. Note that
the large areas of aztec paneling decals are applied first, allowed to dry,
and a second set of smaller decals (primarily marking decals) are placed on
top. These decals are compatable with setting solution which can be applied to
conform around surface details. Paint is not required to produce satisfactory
results. However, some modelers prefer to add additional painted detail to their
kits. See the diagrams on this sheet for instructions regarding decal placement
and optional paint specs. For best results apply dull coat for final finish.
For more model building tips and techniques, visit the Workbench section of our
website at round2models.com/workbench
round2models.com
®
ASSEMBLY INSTRUCTIONS
U.S.S. ENTERPRISE NCC-1701-D
TM
®
AMT662
DECAL & PAINT INSTRUCTIONS
U.S.S. ENTERPRISE NCC-1701-D
TM
HINT: If painting
ship an overall base
color, allow paint to
dry thoroughly before
applying decals.
HINT: To seal decals, and for a more
finished look, apply a clear dullcoat spray
after paint and decals are completely dry.
HINT: For more details on
paint and decal placement,
refer to box art.
Kit is molded in
correct base
color; however, if
you desire to paint
your model,
Enterprise-D is a
base color of
Light Gray
KEY TO NUMBERING KEY TO PAINT COLOR
000
000
000
First Layer Decal Application
Second Layer Decal Application
Opposite Side Decal Application
Paint Color (optional)
A
Light Gray
Medium Gray
Black
White
Red
D
E
C
B
A
Copper
Yellow
Pearl White
Light Blue
Medium Blue
I
J
H
G
F
A
36
40
38
30
51
65646062
42
32
33
34
22
24 23
21
28
27
61
63
35
39
37
29
52
65646163
41
31
60
62
53
43
66
67
26 25
50
x2
54
x2
70
x4
44
71
55
69
69
J
GB E
B
B
J
B
B
B
B
A662-200
B
B
B
B
7
13
12
3
1
2
8
4
9
5
11
19
10
6
20
16
17
45
48
47
46
18
49
58
59
58
59
14
15
72
68
68
69
56
57
69
DECAL & PAINT INSTRUCTIONS
U.S.S. ENTERPRISE NCC-1701-D
TM
U.S.S. ENTERPRISE
NCC-1701-D
1
SAUCER
3
SECONDARY HULL
4
FINAL ASSEMBLY
4A
4B
30
31
35 37
36
&
38
&
32
33
34
Snap the upper
saucer half (30)
and lower saucer
half (31) together,
being sure to press
together tightly for
a snug fit.
Snap the starboard
nacelle in place on
starboard strut. Press
tightly until nacelle
clicks into place.
Repeat assembly
with port nacelle
and port strut.
Snap saucer assembly
in place on secondary
hull. Seat the rear tab
and slot first, then
press saucer down
until it snaps securely
into place.
2
NACELLES
Snap the port nacelle halves
(35 & 36) together.
Repeat assembly with starboard
nacelle halves (37 & 38).
Snap the secondary hull
halves (32 & 33) together,
trapping deflector dish
(34) in place.
HINT: If painting ship an overall
base color, allow paint to dry
thoroughly before applying decals.
Kit is molded in correct base color; however, if
you desire to paint your model, Enterprise-D is
a base color of Light Gray
IMPORTANT: For keys to decal numbering and
paint color, see back page.
A
Starboard (right)
Port (left)
HINT: It is helpful to apply paint and decals to
subassemblies before completing final assembly.
  • Page 1 1
  • Page 2 2

AMT AMT662 Assembly Instructions

AMT
Brand
AMT
Model
AMT662
Type
Assembly Instructions

AMT AMT662

This highly-detailed kit features precision-tooled parts for ease of assembly. It has been designed to assemble via snap assembly. The kit can also be glued together if desired. It is recommended to apply paint and decals to sub-assemblies before completing final assembly.

The kit includes extensive water slide decals. The large areas of aztec paneling decals are applied first, allowed to dry, and a second set of smaller decals (primarily marking decals) are placed on top. These decals are compatible with setting solution which can be applied to conform around surface details.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents