PLEASE FOLLOW THESE SIMPLE

ASSEMBLY INSTRUCTIONS

Instucciones de montaje

STEP 1 STEP 2 STEP 3

ON AN ELEVATED FLAT TABLE:

Lay out 4 boards Attach corner brackets square Attach shorter boards square and

(2-long; 2-short) and flush to both ends of the flush to other side of each bracket

2 LONGEST boards Being sure the tongue is always up

Secure all 4 corners Be sure all 4 corners are square Place bed at desired location

Asegurar las cuatro esquinas Cuadrados de las cuatro esquinas ubicar la cama

Tools Needed

Cordless Drill with a #2 Phillips Drive Bit

+

You can also see these instructions online at:

www.thehandybed.com or YouTube at Handy Bed raised garden bed