The Handy Bed HB-44TGW Installation guide

ASSEMBLY INSTRUCTIONS

Instucciones de montaje

STEP 1 STEP 2 STEP 3

Lay out 4 boards Attach corner brackets square Attach shorter boards square and

(2-long; 2-short) and flush to both ends of the flush to other side of each bracket

2 longest boards Being sure the tongue is always up

Coloque cuatro tablas Fije los soportes a mas juntas adjuntar tablas cortas

STEP 4 STEP 5 STEP 6

Secure all 4 corners Be sure all 4 corners are square Place bed at desired location

Asegurar las cuatro esquinas Cuadrados de las cuatro esquinas ubicar la cama

Tools Needed

Phillips Screwdriver Cordless Drill with Phillips Drive (recommended)