CPS-PWD-90AW24-01 User’s Guide iii
Safety Precautions
Understand the following definitions and precautions to use the product safely.
Safety Information
This document provides safety information using the following symbols to prevent accidents resulting
in injury or death and the destruction of equipment and resources. Understand the meanings of these
labels to operate the equipment safely.
DANGER indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury or in property damage.
Handling Precautions
Indicates dos and don'ts that are assumed to result in possible death or serious injury if they are
inappropriately handled i gnoring this icon.
- Do not use the product in locations exposed to a flammable or corrosive gas. It may cause explosion,
fire, electrical shock, or malfunction.
- If you sense abnormality (smoke, odor, or noise), immediately unplug the po wer cord from the wall
outlet and contact the CONTEC sales representative or sales office.
- To avoid electrocution do not use the product with a wet hand.
- Be sure to connect the product to the stipulated power suppl y voltage. Connecting to a different
voltage might cause a fire or electrical shock.
- Do not use the product with the other power device. It may cause fire or malfunction.
- When the cable or main body is damaged, stop using and repair it immediately. Using it as it is may
cause fire, electrical shock or malfunction.
- Never disassemble or modify the product or replace its parts in order to prevent electrical shock, fire,
or malfunction. CONTEC reserves the right to refuse servicing the product modified by the user. When
any part of the product needs to be replaced at the expiration of its life or due to breakdown, please
contact the CONTEC sales representative or sales office.
- Use the product with the specified models by the CONTEC. Not doing so may cause fire or
malfunction.
- Use the product in the specified operating condition (temperature and humidity)
- This product is a de vice embedded products, it is not a final product.
- If you use other than our specified models, please check detailed information of KH series
(Basic characteristics data * Instruction manual) at the po wer supply maker web.
https://www.cosel.co.jp/en/products/sub01-26.html