BDI ERAS User manual

ERAS
BDI
Brand
BDI
Model
ERAS
Category
Coffee & end tables
Type
User manual

BDI ERAS tables are designed for indoor use and feature a wood veneer that can be cleaned with a moist cloth. These distinctive tables come with sliding doors, handles, and a base that can be assembled easily using the included hardware. ERAS tables are available in two models: the Eras 1441 Coffee Table and the Eras 1446 End Table. The coffee table model includes two sliding doors, while the end table model has one. Both models are engineered for easy assembly and come with a 4mm Hex Driver, Phillips Screwdriver, 5mm Hex Wrench, cam and cam bolts, dowels, and screws for assembly.

BDI ERAS tables are designed for indoor use and feature a wood veneer that can be cleaned with a moist cloth. These distinctive tables come with sliding doors, handles, and a base that can be assembled easily using the included hardware. ERAS tables are available in two models: the Eras 1441 Coffee Table and the Eras 1446 End Table. The coffee table model includes two sliding doors, while the end table model has one. Both models are engineered for easy assembly and come with a 4mm Hex Driver, Phillips Screwdriver, 5mm Hex Wrench, cam and cam bolts, dowels, and screws for assembly.

Eras 1441 Coffee Table
Eras 1446 End Table
B - 5mm Hex Wrench x 1
For Cam and Bolt
G - Handle
1446 x 1
F - M4 x 25mm Screws
1446 x 2
A - 4mm Hex Driver x 1
For Screws
D - 8 x 40mm Dowels x 4
A2 - Phillips
Screwdriver x 1
C1 - Cam and C2 - Cam Bolt x 4
C1
E - 1/4-20 x 63mm Screws
1441 x 8
1446 x 6
ERAS
Designed by: Noah Packard
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc.
All Rights reserved. © 2012 BDI
1441 1446 Revision: 05-11-12
Component List
ERAS tables are engineered for easy assembly. Carefully follow this procedure to prevent any damage.
Unpack and identify the components. The assembl
y workspace should be a non-marri
ng surface such as clean carpet.
For missing hardware pieces, please contact BDI Customer Service at customerse[email protected].
For all other concerns, please contact your BDI Retailer.
1441 1446
ASSEMBLY INSTRUCTIONS
1
BDIUSA.COM CUSTOMER[email protected]
Placement and Maintenance
ERAS tables are designed for indoor use on level floors. Clean wood veneer with a moist cloth.
H - Table x 1
I - Long Base Rails x 2
J - Short Base Rails x 2
K - Sliding Doors 1441 x 2
K
K
J
J
I
I
H
Please Note:
Eras 1441 Coffee Table illustration shown.
Other Eras model's components will differ in appearance.
C2
ERAS
1441 1446
ASSEMBLY INSTRUCTIONS
2
BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
Step 1
Assemble Base
Insert Cams (C1) into Short Base Rails (J) with
the hole opening facing the
Long Base Rail (I).
Insert
Dowels (D) into Long Base Rails (I). Insert
threads of
Cam Bolt (C2) into inserts in Long Base
Rails (I)
.
Step 2
Tighten Cams in Base
Tighten Cams (C1) in Short Base Rails (J)
using
Phillips Screwdriver (A2).
J
J
I
I
J
J
I
I
J
J
D
I
C1
C2
Threads
A2
ERAS
1441 1446
ASSEMBLY INSTRUCTIONS
3
BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
Step 3
Attach Base to Table Bottom
Place assembled base onto table bottom.
Insert
Screws (E) into Base Rails (I and J)
and tighten using
4mm Hex Driver (A).
After all screws are tightened, turn table
over right side up.
Recommended
2-person Step
Eras 1446 End Table Only
Step 4
Attach Handle
Attach Handle (G) to Drawer using Screws (F)
and tighten with Phillips Screwdriver (A2).
To turn Table over
A2
G
F
F
A
E
Eras 1447 Open End Table
Eras 1448 Console
ERAS
1447 1448
ASSEMBLY INSTRUCTIONS
BDIUSA.COM CUSTOMERSERVIC[email protected]
Placement and Maintenance
ERAS tables are designed for indoor use on level floors. Clean wood veneer with a moist cloth.
Designed by: Noah Packard
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc.
All Rights reserved. © 2011 BDI
1447 1448 Revision: 01-17-11
1
C1
E - 1/4-20 x 63mm Screws
1447 x 6
1448 x 10
B - 5mm Hex Wrench x 1
For Cam and Bolt
A - 4mm Hex Driver x 1
For Screws
D - 8 x 40mm Dowels x 4
C1 - Cam and C2 - Cam Bolt x 4
Component List
ERAS tables are engineered for easy assembly. Carefully follow this procedure to prevent any damage.
Unpack and identify the components. The assembly workspace should be a non-marring surface such as clean carpet.
For missing hardware pieces, please contact BDI Customer Service at customerservic[email protected].
For all other concerns, please contact your BDI Retailer.
H - Table x 1
I - Long Base Rails x 2
J - Short Base Rails x 2
K - Sliding Doors 1441 x 2
K
K
J
J
I
I
H
Please Note:
Eras 1441 Coffee Table illustration shown.
Other Eras model's components will differ in appearance.
C2
ERAS
1447 1448
ASSEMBLY INSTRUCTIONS
2
BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
Step 1
Assemble Base
Insert short threads of Cam Bolt (C2) into inserts
in
Long Base Rails (I). Turn Cam Bolts (C2) by
hand COUNTERCLOCKWISE to tighten.
Insert
Dowels (D) into Long Base Rails (I).
Insert
Cams (C1) into Short Base Rails (J) with
arrow pointing toward
Long Base Rail (I).
Step 2
Tighten Cams in Base
Tighten Cams (C1) in Short Base Rails (J)
using
5mm Hex Wrench (B).
J
J
I
I
B
C1
J
C1 Cam
Align Arrow towards
Long Base Rails.
J
I
I
J
C1
Short Threads
C2
J
D
I
ERAS
1447 1448
ASSEMBLY INSTRUCTIONS
3
BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
Step 3
Attach Base to Table Bottom
Place assembled base onto table bottom.
Insert
Screws (E) into Base Rails (I and J)
and tighten using
4mm Hex Driver (A).
After all screws are tightened, turn table
over right side up.
Recommended
2-person Step
A
E
To turn Table over
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

BDI ERAS User manual

ERAS
BDI
Brand
BDI
Model
ERAS
Category
Coffee & end tables
Type
User manual

BDI ERAS tables are designed for indoor use and feature a wood veneer that can be cleaned with a moist cloth. These distinctive tables come with sliding doors, handles, and a base that can be assembled easily using the included hardware. ERAS tables are available in two models: the Eras 1441 Coffee Table and the Eras 1446 End Table. The coffee table model includes two sliding doors, while the end table model has one. Both models are engineered for easy assembly and come with a 4mm Hex Driver, Phillips Screwdriver, 5mm Hex Wrench, cam and cam bolts, dowels, and screws for assembly.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents