HL19KN2
Contents
-1-
Safety and warnings...................................................................................... 2-3
Introduction..................................................................................................4
Installation...................................................................................................5-8
R
Operation.....................................................................................................10-11
Trouble Shooting..........................................................................................12
Warranty............
emote Control............................................................................................9
.......................................................................................... 13
-2-
SAFETY AND WARNINGS
IMPORTANT SAFETY INSTRUCTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN!
CAUTION
CAUTION
The symbol indicates that dangerous
voltages constituting a risk of electric shock
are present within this unit.
The symbol indicates that there are
important operating and maintenance
instructions in the literaturaccompanying this
unit.
To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
WARNING:
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, install
in accordance with the instructions.
8) Do not install near any heat sources such as
radiations, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9) Do not defeat the safety purpose of the
polarized plug. If the provided plug does not fit
into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protected the power cord from being walked
on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11) Only use attachments/accessories specified
by the manufacturer.
12) Unplug this apparatus during lighting
storms or when unused for long periods of time.
13) Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
14) Mains plug is used as the disconnect device,
the disconnect device shall remain readily
operable.
15) The ventilation should not be impeded by
covering the ventilation openings with items,
such as newspapers, table-cloth, curtains, etc.
16) No naked flame sources, such as lighted
candles, should be placed on the apparatus.
17) Attention should be drawn to the
environmental aspects of battery disposal.
18) The use of apparatus in moderate climate.
19) The apparatus shall not be exposed to
dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on
the apparatus.
This symbol indicates that this product
incorporates double insulation between
hazardous mains voltage and user accessible
parts. When servicing use only
identical replacement parts.
This marking indicates that this product should
not be disposed with other household wastes
throughout the EU. To prevent possible harm to
the environment or human health from
uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of
material resources. To return your used device,
please use the return and collection systems or
contact the retailer where the product was
purchased. They can take this product for
environmental safe recycling.
The batteries shall not be exposed to
excessive heat such as sunshine, fire or the
like.
WARNING:
-3-
High voltages are used in the operation of this television
receiver. Do not remove the cabinet back from your set.
Refer servicing to qualified service personnel.
SAFETY AND WARNINGS
To prevent fire or electrical shock hazard, do not expose
the television receiver to rain or moisture.
Do not drop or push objects into the television cabinet
slots or openings. Never spill any kind of liquid on the
television receiver.
Do not block the ventilation holes in the back cover.
Adequate ventilation is essential to prevent failure of
electrical components.
Do not trap the power supply cord under the television
receiver.
Never stand on, lean on, or suddenly push the television or
its stand. You should pay special attention to children.
Serious injury may result if it falls.
Do not place your television on an unstable cart, stand,
shelf or table. Serious injury to an individual , and damage
to the television, may result if it falls.
When the television receiver is not used for an
extended period of time, it is advisable to disconnect
the AC power cord from the AC outlet.
Avoid exposing the television receiver to direct sunlight
and other sources of heat. Do not stand the television
receiver directly on other products which give off heat,
e.g. video cassette players and audio amplifiers. Do not
place naked flame sources, such as lighted candles on
the television.
Dim:515*320mm(）
If the television is to be built into a compartment or similar
enclosure, the minimum distances must be maintained. Heat
build-up can reduce the service life of your television, and
can also be dangerous.
-4-
INTRODUCTION
Main parameter
Accessories
Remote Control.................................
1
User s Manual .................................’
1
Batteries (AAA)................................ 2
Accessories
Resolution: 1366x768
Aspect Ratio: 16:9
TV System:
NTSC
Video Signal System:
Input Power Voltage:
Power consumption: 30W
Audio Output Power(THD 7%): 2x1.5W
NTSC/PAL/SECAM
AC 100V-240V 50/60Hz
Analog RGB(VGA) Input x 1
Rear High-Definition Multimedia Interface(HDMI) Input x 1
Rear Audio Input x 2
Composite Video Input >=350
YCb(Pb)Cr(Pr) Input x 1
Horizontal definition(TV line)
YCb(Pb)Cr(Pr) >=400
Video Input >=400
Viewing Picture Size(diagonal) 19 inch
Rear Video Input x 1Composite
-5-
Front panel
INSTALLATION
Side buttons
1 SOURCE．：
“”“”
“”“”
Display the input source menu.
CH+ or CH- to select
items .
press VOL+ or VOL- to
Press this button to turn the unit ON from
STANDBY mode.
Press it again to turn the set back to STANDBY mode.
2MENU
D
3 CH+/CH-
4VOL+/VOL-
5.
．：
．
，“”“”
．
isplay the main MENU.
In TV mode press CH+ or CH- to change
the channel up and down.
In MENU mode, press
Adjust sound level.
In MENU mode,
adjust the item that you selected.
POWER/STANDBY
REAR AV Connection
All the terminals are (from left to right):
AC POWER, ANTENNA SOCKET, PC AUDIO input, Audio input, YPbPr input,
AV input, VGA, HDMI input.
Note: 1.AV and YPbPr share the Audio input .
2. When the HDMI port receives a DVI signal, the audio signal be from the PC
Audio .
(component)
jacks
used will
input jack
1: Remote control sensor.
2: Indicator LED: GREEN POWER ON.
RED STANDBY.
3: Side buttons
SOURCE
MENU
CH+
CH-
VOL+
VOL-
POWER/STANDBY
1 2 3
4 5 6
7 8 9 0
+
CH
_
+
_
VOL
30 30
1
2
3
RF INPUT
PC
AUDIO INPUT
COMPONENT
Y
Pb
AV
Pr
R
L
VGA INPUT
HDMI
RF INPUT
PC
AUDIO INPUT
COMPONENT
Y
Pb
AV
Pr
R
L
VGA INPUT
HDMI
-6-
INSTALLATION
STEPS:
PC
Both the TV and computer are off before making any connections.
1.Connect the VGA and the audio cable.
2.Connect the power cord.
3.Power on the TV, switch to VGA mode.
4.Power on the VGA.
This sequence is very important.
PRESET MODE
1
2
3
4
640*480
800*600
1024*768
1280*1024
60
60
60
60
31.47
37.88
48.36
63.98
RESOLUTION
V.Freq.(Hz) H.Freq.(KHz)
ANTENNA
Note:
Aerial connections:IEC(female).
Input impendance:75 unbalanced.
INSTALLATION
-7-
RF INPUT
PC
AUDIO INPUT
COMPONENT
Y
Pb
AV
Pr
R
L
VGA INPUT
HDMI
To audio outputs
VIDEO EQUIPMENT
TO VIDEO
output
Yellow (video)
White(audio L)
Red(audio R or Pr)
Y
W
R
W R
G
B
R
Blue(Pb)
Green(Y)
B
G
HDMI
VIDEO EQUIPMENT with YPbPr
W
R
G
B
R
W
R
W R
-8-
INSTALLATION
AV EQUIPMENT
It can be connected to the following devices: VCR, multi disc player, DVD, camcorder, video game
or stereo system, etc.....
YPbPr can support these video formats:480i,576i,480p,576p,720p,1080i,1080p,
This TV provides one AV, and one YPbPr (component) input for convenient connection to VCR,DVD or
other video equipment. Please refer to the owner s manual of the equipment to be connected as well.
-9-
REMOTE CONTROL
REMOTE CONTROL
1:
TV on/off
2: :
For direct access to program. For
a 2 (3) digit program number,
The second (third) digit must be
entered before the dash disappears.
The number, the name (and the sound
mode, in analogue mode) are displayed
for a few seconds.
3:
To display TV menu or to return to the
previous menu.
4:
To move within the menu.
5:
To exit menu.
6:
To adjust the sound level.
7: P
To switch the picture mode.
8:
Auto adjust in PC mode.
9:
Set the time to turn off the TV.
10:
Set the V-chip level .
11:
To disable or enable the sound.
12:
Switch the sound: stereo, SAP or mono.
13:
To access the previously viewed
program.
14:
Change the input source.
15:
Confirms selection.
16:
Displays/hides the program
information
17:
To switch the sound mode.
18:
To access the next or previous
Program.
19:
To change the picture aspect ratio.
20:
Switch the closed caption mode (CC1-
CC4,Text1-Text4)
21:
Please refer to the user manual for
DVD player if DVD mode is available.
POWER
NUMBER KEY
MENU
CURSOR
EXIT
VOL+/-
.M
AUTO
SLEEP
V-CHIP
MUTE
MTS/SAP
RECALL
SOURCE
ENTER
TV DISPLAY
S.M
CH+/CH-
ASPECT
CC
DVD keys :(optional)
1
ENTER
RETURN
DISPLAY
2
3
4
5
6
7
8
9 0
+
CH
_
+
_
VOL
SUBTITLE
AUDIO
SLEEP V-CHIP CC
AUTO
S.M
EXIT
P. M
TV DISPLAY
SOURCE
MENU
MTS/SAP
MUTE
POWER
ASPECT
DVD/USB
RECALL
GOTO
MENU
SETUP
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
OPERATION
-10-
CONTRAST
BRIGHTNESS
SATURATION
SHARPNESS
COLOR TEMP .
SCALE
PICTURE MODE
HUE
PICTURE
50
50
50
50
32
COOL
FULL
STANDARD
SELECT ADJUST
MENU
EXIT
BASS
TREBLE
BALANCE
SOUND MODE
AUDIO
5052
51
50
STANDARD
SELECT ADJUST
MENU
EXIT
LANGUAGE
H - POSITION
V - POSITION
DURATION
HALETONE
OSD
15
50
50
ENGLISH
SELECT ADJUST
MENU
EXIT
100
SLEEP TIMER
DLC
NOISE REDUCTION
MEMORY RECALL
FUNCTION
OFF
OFF
ON
SELECT ADJUST
MENU
EXIT
1. PICTURE MENU
The first item of the MENU is the picture menu.
You can adjust picture settings here, such as
contrast, brightness, etc. Press to move, press
to adjust.
Note:
1
2. Four picture modes: STANDARD,MOVIE,
VIVID,USER.
3.HUE is available in NTSC system only.
.Three color temperatures: NORMAL,
WARM,COOL.
2.AUDIO MENU
The second item of the MENU is the audio menu.
You can adjust the sound settings here. Press to
move, press to adjust.
4.FUNCTION MENU
The fourth item of the MENU is the function
menu.You can adjust the following settings:
1.SLEEP TIMER
2.
3.
4.MEMORY RECALL
: adjust the sleep time
: Reset all of the settings to
the factory default value.
。
DLC:
NOISE REDUCTION:
Dynamic luminance control. Set the
option to ON, which can enhance the contrast
and brightness.
adjust this item to
reduce noise in TV mode.
3.OSD MENU
The third item of the MENU is the OSD Menu.
Press to select, press to adjust.
adjust the language by
Pressing .
adjust the horizontal position
of the OSD.
adjust the vertical position of
the OSD.
adjust the duration, which
indicates how long the OSD is displayed.
adjust the transparency of the
OSD.
LANGUAGE:
H-POSITION:
V-POSITION:
DURATION:
HALFTONE:
OPERATION
-11-
In PC mode, there are two special menu
You can adjust the PC picture, settings, such as
contrast, brightness, etc
Press to select, press to adjust.
You can choose the color
NORMAL, WARM, COOL
or USER.
Press to adjust R/G/B value according to your
personal taste under user mode.
You can choose the VGA scale mode:
FULL and 4:3.
adjust the horizontal position
of the PC image.
adjust the vertical position of
the PC image.
fine tune the PC image width.
fine tune the phase of the PC image.
Usually, there is no need to adjust the above
options.
adjust the PC image to fit the
screen automatically
：
1. PICTURE MENU
COLOR TEMP:
temperature:
SCALE:
2. GEOMETRY MENU
H-POSITION:
V-POSITION:
CLOCK:
PHASE:
AUTO ADJUST:
CONTRAST
BRIGHTNESS
COLOR TEMP .
SCALE
PICTURE
50
55
FULL
SELECT ADJUST
MENU
EXIT
CEOMETRY
SELECT ADJUST
MENU
EXIT
H - POSITION
V - POSITION
CLOCK
PHASE
AUTO ADJUST
100
100
100
0
AUTO SCAN
ADD/ERASE
SOURCE
C.CAPTION
PARENT CTRL
CHANNEL
ADD
CATV STD
OFF
SELECT ADJUST
MENU
EXIT
5.CHANNEL MENU
The fifth item of the MENU is the channel menu
(Only in TV mode).You can complete the channel
scan and set TV channel settings here.
1.AUTO SCAN: Search all the channels
automatically.
2.ADD/ERASE: Display or skip a channel.
3.SOURCE:
4.C.CAPTION: adjust c.c. Type.
5.PARENTAL CTRL: enter parent ctrl menu,
The default password is 6666.
AIR,CABLE STD,CABLE IRC
CABLE HRC. Choose the right TV Source for Auto
scan.
，
CHANGE PASSWORD
V-CHIP
TV-RATING
MOVIE-RATING
ENGLISH-RATING
FRENCH-RATING
CHANNEL
OFF
NONE
SELECT ADJUST
MENU
EXIT
EMPTY
EMPTY
1.CHANGE PASSWORD: you can change the
current PARENTAL CTRL password.
2.V-CHIP: you can set the V-CHIP function
ON/OFF.
3.TV-RATING: you can enter the TV rating Menu.
4.MOVIE-RATING: you can adjust the movie
rating.
5.ENGLISH-RATING: you can adjust the english
rating.
6.FRENCH-RATING: you can adjust the french
rating.
Picture Audio
Snow Noise
antenna position, direction
or connection
Inspection Check
Interference
Noise
electronic equipment,car/
motorcycle,fluorescent light
Normal Picture
Mute
Volume(check if mute is
activated or if the audio system
connections are not correct)
No picture Mute
Power cord is not inserted
Contrast and brightness/volume
setup
Press standby key on the remote
control for inspecting
No colour Normal audio Color control
Picture
breaking up
Normal audio
or weak
retune channel
No colour
Noise
TVsystem
Normal audio
antenna position, direction
or connection
Trouble shooting
Trouble phenomenon Symptom
Ghost
-12-
The LCDTV panel is built with very high precision technology giving you fine picture details
in vibrant color. Occasionally, a few non-active pixels may appear on the screen as a fixed
point of red, green, blue, black or white. Please note this does not affect the performance of
the product.
WARRANTY
-13-
01
0090506421A
/