peak design M-CM-AA-WEB-1 User manual

Brand
peak design
Model
M-CM-AA-WEB-1
Type
User manual

Peak Design M-CM-AA-WEB-1 is a versatile car mount designed to magnetically hold and wirelessly charge your phone while you drive. It easily attaches to your dashboard or console with a strong adhesive base and can be positioned to provide the perfect viewing angle. The mount also comes with cable clips to help you neatly route the charging cable, ensuring a tidy setup in your car.

Peak Design M-CM-AA-WEB-1 is a versatile car mount designed to magnetically hold and wirelessly charge your phone while you drive. It easily attaches to your dashboard or console with a strong adhesive base and can be positioned to provide the perfect viewing angle. The mount also comes with cable clips to help you neatly route the charging cable, ensuring a tidy setup in your car.

Car Mount
Mount Head
USB-C Port
Base Plate
Charging
Port
USB-C to
USB-C
Cable (1m)
WIRELESS CHARGING CAR MOUNT
INSTRUCTIONS
more info
pkdsn.com/carmount
GET TO KNOW
YOUR MOUNT
requires Peak Design Case
or MagSafe Phone/Case
not included
Allow 24 hours for Base Plate to adhere
to surface before use! REALLY!
INSTALLATION
1. Locate a spot on your dash or console to
attach your Car Mount. For ideal adhesion,
mount to a hard, smooth, flat surface. Soft plastics
and leathers with texture should be avoided to
ensure a ideal bond.
Test fit to ensure the Base Plate can match the
contours of the dash.
Installation takes 24 hours!
2. Clean surface with provided wipe.
Wait five minutes for the surface to dry.
Not allowing surface to fully dry may
result in failure to bond.
!
Cable
Clips x3
Attaching Phone
Car Mount magnetically connects to the back of your
phone. Requires Peak Design Case or MagSafe
Phone/Case. Once connected, confirm phone is
charging via phone screen.
Removing Mount
We recommend breaking the adhesive bond using dental
floss. Wrap floss behind mount and cinch down.
USE
3. Remove adhesive backing and attach the Car
Mount by pressing and holding firmly.
ADHESIVE FAILURE
In the event the adhesive fails, remove the
adhesive from the mount using your thumb
by slowly peeling from the plastic base.
Apply a new adhesive pad to the base of the
mount.
Install the mount again following the
installation steps exactly.
Wait five minutes for the surface to dry.
Not allowing surface to fully dry may
result in failure to bond.
!
Wait 24 hours before use. Failure to wait
a full 24 hours will result in a weak bond.
!
Press only on
Base Plate
WARNING: If not attached correctly, product
and/or phone may dislodge or be thrown
into air in event of crash. Consult your car’s
manual to ensure mount does not cover or
interfere with operation of airbag.
Stay safe. Follow local regulations for
phone use while driving.
!
4. Repeat steps 2-3 to install Cable Clips routing the
Cable to the Charging Port.
  • Page 1 1
  • Page 2 2

peak design M-CM-AA-WEB-1 User manual

Brand
peak design
Model
M-CM-AA-WEB-1
Type
User manual

Peak Design M-CM-AA-WEB-1 is a versatile car mount designed to magnetically hold and wirelessly charge your phone while you drive. It easily attaches to your dashboard or console with a strong adhesive base and can be positioned to provide the perfect viewing angle. The mount also comes with cable clips to help you neatly route the charging cable, ensuring a tidy setup in your car.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents