2. Computers & electronics
  3. Computer cables
  4. Cable interface/gender adapters
  5. peak design
  6. M-CS-BK

peak design M-CS-BK Operating instructions

  • Hello! I've reviewed the instructions for the Peak Design Wireless Charging Stand. This document outlines how to use the magnetic stand, connect the USB-C cable and remove the phone after charging. I'm ready to answer any questions you have about it.
  • What is required to use the wireless charging stand?
    How do I connect the charging stand to power?
    How do I remove my phone from the charging stand?
Cable Clips
x3
USB-C to
USB-C Cable
(2m)
requires
Power Adapter
(sold separately).
Wireless
Charging
Stand
WIRELESS CHARGING STAND
INSTRUCTIONS
more info
pkdsn.com/stand
WHAT’S IN THE BOX
requires Peak Design Case
or MagSafe Phone/Case
not included
USE
Attach USB-C Cable to the back of your Stand and
plug into wall using your Peak Design Power Adapter
(sold separately).
Attaching Phone
Wireless Charging Stand magnetically connects to the
back of your phone. Requires Peak Design Case or
MagSafe Phone/Case. Once connected, confirm phone
is charging via phone screen.
Removing Phone
To remove phone, peel from the bottom up.
/