1. Ensure your phone is MagSafe compatible (iPhone 12 and later), and ensure you are
not using a phone case thicker that 3mm or with metal components.
2. Connect the car’s dashboard USB port to the USB-C cable on the device. If your
car does not come fitted with a USB port, a car adapter may be required. Ensure
the adapter is rated for QC 3.0 use.
3. Fit the charger to your car’s vent. Loosen the Mount Adjust knob so the mount is
flexible, and pull down on the lever to open the vent clips. Insert the clips into your
car’s air vent, and release the lever to close the clips (securing to the air vent.
4. Position the charger into you desired angle, then tighten the Mount Adjust knob to
set the angle.
5. Ensure that the wireless charging surface and the rear of the mobile device are
unobstructed and free of metallic matter (remove any phone cases containing
metal), then place the you phone onto magnetic ring of the wireless charger.
6. The mobile device will automatically hold in place and begin to charge.
