Thank you for buying an Angelo Decor Fountain!
We ho
p
e
y
ou will find these instructions hel
p
ful in settin
g
u
p
y
our fountain. If
y
ou need mor
e
information to
p
ro
p
erl
y
care for
y
our fountain,
p
lease DO NOT return the unit to
p
lace of
p
urchase.
Please visit our web site, www.an
g
elodecor.com, for assistance and warrant
y
information.
First unpack carton carefully, arranging parts safely in your working area.
Pump comes pre-installed Set pump to desired Feed the cord down through the Twist and Lock bowl in place.
with cord seal,Check to see setting. pedestal and align with groove at base.
the cord seal is tight
Connect tubing to pump.
Run tubing up through the riser. "Twist and lock" riser in place. Run tubing through the 2nd tie
r
Connect tubing to top sectio
n
"Twist and lock" bowl in place. "Twist and lock" top piece into
place.
Install pump access door. The final assembly should
look like this
This fountain comes complete with
our innovative splash reduction
system. If splash is a concern,
simply drape the splash line over
each spill point to dramatically
reduce splash.
Now sim
p
l
y
fill with clean water and
p
lu
g
into a
g
rounded GFCI outle
t
We recommend keeping bowl 3/4 full of water to avoid pump burnout.
/
