Artsound PWR09 User manual

Brand: Artsound

Model: PWR09

Type: User manual

Artsound PWR09 is a high-performance portable speaker system designed to deliver exceptional sound quality for a wide range of applications. With its powerful 160W Class-D amplifier, dual 6.5" woofers, and 2" titanium compression drivers, the PWR09 produces a rich, detailed sound with deep bass and crystal-clear highs.

Its built-in DSP processor offers six EQ presets (Rock, Pop, Classic, Country, Jazz, Extra Bass) to tailor the sound to your preference or the specific requirements of your event.

3. GENERAL DESCRIPTION

The PWR09 includes high-output compression drivers, and a double 6.5” woofer that produces an even and

smooth studio quality sound at all levels. With accurate playback, smooth dispersion of mid and high frequen-

cies, and an ergonomic design for easy transport and setup.

• PWR09

• User instructions

• Power cable

• Remote control (AAA)

4. FEATURES

1. WARNINGS AND SAFETY

2. CONTENTS OF THE BOX

• Steel basket woofer

• Auxiliary line input

• Stereo Bluetooth Pairing

• Built-in DSP Processor

• USB Playing and Charging

• Built-in Rechargeable Battery (2 x 4500 mAh)

• High Temperature Voice Coil

• LED light eects

• Remote Control

• To prevent ﬁre or electric shocks, the device must

not be exposed to rain or humidity.

• For your own safety: to prevent electric shocks do

not remove the housing.

• Do not try to repair any malfunctioning parts of the

device yourself. Ask a professional expert to do this

for you.

• When plugged into the mains, the device remains

electrically charged even when switched o.

Dear Customer, congratulations on the purchase of this loudspeaker. Please read these instructions carefully

and keep them for further reference.

PWR09

MANUAL

PWR09

123

5 9

10 11

123

5 9

10 11

1. Pairing button

Press this button to switch between Bluetooth/

USB input/Aux input.

Note: The default is the Bluetooth mode.

2. EQ button

Press this button to change through the dierent

EQ modes (Rock/Pop/Classic/Country/Jazz/Bass).

Press and hold this button for 2-3 seconds to

enter LINK OUT mode (Aux light ﬂashes slowly).

3. Light control button

Press this button to change through the dierent

light modes. Press and hold this button for 2-3

seconds to turn o the light.

4. Volume Control

5. TWS button

Press this button for stereo Bluetooth connection

with a 2nd PWR09.

6. Volume control

Used to adjust the volume of the connected

microphone (not included).

7. Bass control

Used to adjust the bass of the microphone (not

included).

8. Mic Input

Use 1/4” jack connector balanced or unbalanced.

9. USB Port

to play music ﬁles from a USB drive or to charge

your external device.

10. Aux in

to connect an external audio source.

11. Link out.

Note: If you use the RCA cable link to the next

speaker, the sound may not be synchronized, please

press and hold EQ button for 2-3 seconds on the

ﬁrst PWR09 to synchronize the speaker

automati-

cally.

12. Power Supply Input Connector

Use with power cord.

13. Battery level LED indicator

Warning: Make sure speaker is o and all LEVEL

controls are down (counterclockwise) before every

use.

5. FUNCTIONS

PWR09

6. REMOTE CONTROL

7. CONNECTIONS

1. Connect the output from your signal source (mixing

console, microphone, preamp, or other mic- or

line-level source) directly to the INPUT connector

on the back of the speaker. It accepts balanced

line-level signals from mixers, preampliﬁers, CD

players, tape decks, etc., and accepts direct con-

nections from dynamic microphones through the

MIC input.

2. There is also RCA Output connector labeled LINE

OUT. This allows you to connect more than one

PWR09 to the output of your sound source. Simply

plug RCA cable from the Line Out connector of one

speaker to the input connector of another speaker,

and so on, daisy-chaining multiple speakers.

3. Turn on your signal source. (Make sure volume is

turned down) Turn on PWR09. Start signal source

and adjust volume controls on the signal source

and PWR09 speaker.

BLUETOOTH CONNECTION

1. When Power on, Bluetooth mode is automatically

activated.

2. Search for “PWR09” on your device and connect.

Note: You can’t start a new pairing request while

a device is already connected. Press and hold

the “PAIRING MODE” button for 2-3 seconds to

disconnect the previous pairing, then you can

start a new pairing.

STEREO BLUETOOTH CONNECTION

1. Power on the two PWR09, press the TWS button on

both speakers to link two PWR09 speakers.

2. Search for “PWR09” on your device and connect.

After successful connection, you can enjoy stereo

sound.

1. On / O: Used to turn the speaker on or o.

2. Mute: Press to mute the sound of the speaker.

3. Repeat: Used for repeat play in USB mode.

4. EQ button: Switch between 6 EQ proﬁles: Rock / Pop / Classical / Country

/ Jazz / Extra Bass

5. Play / Pause.

6. Next / Previous.

7. Volume: Volume down, Volume up.

8. Bluetooth / USB / AUX: Press to change source.

9. LED Switch Button: Turns the illumination on or o.

10. LED Mode button: Press this button to cycle through the dierent LED

modes.

11. Folder function: Used for folder navigation in USB mode.

PWR09

House of Music nv, Schoonboeke 10, BE-9600 Ronse

8. TECHNICAL SPECIFICATIONS

system 2-way active ﬁlter

range <75m2

woofer 2 x 6.5” polypropylene cone

speaker 2 x 2” titanium driver with 0.52” VC

bass reﬂex yes

amp power max. 160W, class D

sensitivity 90dB

frequency range 60Hz-20KHz

sources stereo Bluetooth [TWS] RCA stereo input

MIC input ¼” TRS USB, Type A

wireless Bluetooth 5.0

battery with LED-indication 2 x 4500 mAh (up to 8 hour)

weight/piece 12kg

composition ABS plastic

colour Black

dim. (hxwxd) 675 x 328 x 320mm

accessoires remote control

9. WARRANTY CONDITIONS

2 year warranty from date of purchase. The warranty is limited to the repair of replacement of the defective

material insofar as this defect is a result of normal use and the device has not been damaged. Artsound is not

responsible for any other costs that ensue as a result of the defect (e.g. transport). For details, please consult our

general terms and conditions of sale.

This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE).

This means that this product must be handled pursuant to European Directive 2002/96/EC in order to

be recycled or dismantled to minimize its impact on the environment.For further information, please

contact your local or regional authorities.

I, House Of Music NV, hereby declare that the type of radio equipment ARTSOUND complies with Direc-

tive 2014/53/EU. The full text of the EU Declaration of Conformity can be found at the following internet

address: http://www.artsound.be/en/support/downloads

Disclaimer: All trademarks are the property of their respective owners. All speciﬁcations and information are

subject to change without further notice. Slight variations and dierences might appear between printed photos

and actual product due to product enhancement.

House Of Music NV - Schoonboeke 10 B-9600 Ronse - Belgium

Artsound PWR09 User manual

Brand: Artsound

Model: PWR09

Type: User manual

Its built-in DSP processor offers six EQ presets (Rock, Pop, Classic, Country, Jazz, Extra Bass) to tailor the sound to your preference or the specific requirements of your event.

Download PDF

report

Artsound PWR09 User manual

Artsound PWR09 User manual

Related papers

Other documents