2. Artsound
  3. PWR09
PWR09

Artsound PWR09 User manual

  • Hello! I've reviewed the user manual for the artsound PWR09 loudspeaker and I'm ready to assist you. This document provides instructions on using the speaker, including its features, connections like Bluetooth and AUX, and usage of the remote control. It also details the device's technical specification and safety precautions.
  • What is included in the box?
    How do I connect to Bluetooth?
    How to use Stereo Bluetooth Connection?
    What are the available EQ modes?
1
3. GENERAL DESCRIPTION
The PWR09 includes high-output compression drivers, and a double 6.5” woofer that produces an even and
smooth studio quality sound at all levels. With accurate playback, smooth dispersion of mid and high frequen-
cies, and an ergonomic design for easy transport and setup.
• PWR09
• User instructions
• Power cable
• Remote control (AAA)
4. FEATURES
1. WARNINGS AND SAFETY
2. CONTENTS OF THE BOX
• Steel basket woofer
• Auxiliary line input
• Stereo Bluetooth Pairing
• Built-in DSP Processor
• USB Playing and Charging
• Built-in Rechargeable Battery (2 x 4500 mAh)
• High Temperature Voice Coil
• LED light eects
• Remote Control
• To prevent fire or electric shocks, the device must
not be exposed to rain or humidity.
• For your own safety: to prevent electric shocks do
not remove the housing.
• Do not try to repair any malfunctioning parts of the
device yourself. Ask a professional expert to do this
for you.
• When plugged into the mains, the device remains
electrically charged even when switched o.
Dear Customer, congratulations on the purchase of this loudspeaker. Please read these instructions carefully
and keep them for further reference.
PWR09
MANUAL
PWR09
2
123
5 9
4
6
7
8
10 11
12
13
123
5 9
4
6
7
8
10 11
12
13
1. Pairing button
Press this button to switch between Bluetooth/
USB input/Aux input.
Note: The default is the Bluetooth mode.
2. EQ button
Press this button to change through the dierent
EQ modes (Rock/Pop/Classic/Country/Jazz/Bass).
Press and hold this button for 2-3 seconds to
enter LINK OUT mode (Aux light flashes slowly).
3. Light control button
Press this button to change through the dierent
light modes. Press and hold this button for 2-3
seconds to turn o the light.
4. Volume Control
5. TWS button
Press this button for stereo Bluetooth connection
with a 2nd PWR09.
6. Volume control
Used to adjust the volume of the connected
microphone (not included).
7. Bass control
Used to adjust the bass of the microphone (not
included).
8. Mic Input
Use 1/4” jack connector balanced or unbalanced.
9. USB Port
to play music files from a USB drive or to charge
your external device.
10. Aux in
to connect an external audio source.
11. Link out.
Note: If you use the RCA cable link to the next
speaker, the sound may not be synchronized, please
press and hold EQ button for 2-3 seconds on the
first PWR09 to synchronize the speaker
automati-
cally.
12. Power Supply Input Connector
Use with power cord.
13. Battery level LED indicator
Warning: Make sure speaker is o and all LEVEL
controls are down (counterclockwise) before every
use.
5. FUNCTIONS
PWR09
3
1
3
6
7
9
10
2
4
5
8
11
6. REMOTE CONTROL
7. CONNECTIONS
1. Connect the output from your signal source (mixing
console, microphone, preamp, or other mic- or
line-level source) directly to the INPUT connector
on the back of the speaker. It accepts balanced
line-level signals from mixers, preamplifiers, CD
players, tape decks, etc., and accepts direct con-
nections from dynamic microphones through the
MIC input.
2. There is also RCA Output connector labeled LINE
OUT. This allows you to connect more than one
PWR09 to the output of your sound source. Simply
plug RCA cable from the Line Out connector of one
speaker to the input connector of another speaker,
and so on, daisy-chaining multiple speakers.
3. Turn on your signal source. (Make sure volume is
turned down) Turn on PWR09. Start signal source
and adjust volume controls on the signal source
and PWR09 speaker.
BLUETOOTH CONNECTION
1. When Power on, Bluetooth mode is automatically
activated.
2. Search for “PWR09” on your device and connect.
Note: You can’t start a new pairing request while
a device is already connected. Press and hold
the “PAIRING MODE” button for 2-3 seconds to
disconnect the previous pairing, then you can
start a new pairing.
STEREO BLUETOOTH CONNECTION
1. Power on the two PWR09, press the TWS button on
both speakers to link two PWR09 speakers.
2. Search for “PWR09” on your device and connect.
After successful connection, you can enjoy stereo
sound.
1. On / O: Used to turn the speaker on or o.
2. Mute: Press to mute the sound of the speaker.
3. Repeat: Used for repeat play in USB mode.
4. EQ button: Switch between 6 EQ profiles: Rock / Pop / Classical / Country
/ Jazz / Extra Bass
5. Play / Pause.
6. Next / Previous.
7. Volume: Volume down, Volume up.
8. Bluetooth / USB / AUX: Press to change source.
9. LED Switch Button: Turns the illumination on or o.
10. LED Mode button: Press this button to cycle through the dierent LED
modes.
11. Folder function: Used for folder navigation in USB mode.
PWR09
House of Music nv, Schoonboeke 10, BE-9600 Ronse
8. TECHNICAL SPECIFICATIONS
system 2-way active filter
range <75m2
woofer 2 x 6.5” polypropylene cone
speaker 2 x 2” titanium driver with 0.52” VC
bass reflex yes
amp power max. 160W, class D
sensitivity 90dB
frequency range 60Hz-20KHz
sources stereo Bluetooth [TWS] RCA stereo input
MIC input ¼” TRS USB, Type A
wireless Bluetooth 5.0
battery with LED-indication 2 x 4500 mAh (up to 8 hour)
weight/piece 12kg
composition ABS plastic
colour Black
dim. (hxwxd) 675 x 328 x 320mm
accessoires remote control
9. WARRANTY CONDITIONS
2 year warranty from date of purchase. The warranty is limited to the repair of replacement of the defective
material insofar as this defect is a result of normal use and the device has not been damaged. Artsound is not
responsible for any other costs that ensue as a result of the defect (e.g. transport). For details, please consult our
general terms and conditions of sale.
This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE).
This means that this product must be handled pursuant to European Directive 2002/96/EC in order to
be recycled or dismantled to minimize its impact on the environment.For further information, please
contact your local or regional authorities.
I, House Of Music NV, hereby declare that the type of radio equipment ARTSOUND complies with Direc-
tive 2014/53/EU. The full text of the EU Declaration of Conformity can be found at the following internet
address: http://www.artsound.be/en/support/downloads
Disclaimer: All trademarks are the property of their respective owners. All specifications and information are
subject to change without further notice. Slight variations and dierences might appear between printed photos
and actual product due to product enhancement.
House Of Music NV - Schoonboeke 10 B-9600 Ronse - Belgium
/