Seville Classics OFF65903-4 Assembly Instructions

Brand
Seville Classics
Model
OFF65903-4
Type
Assembly Instructions

Seville Classics OFF65903-4 is a mobile desk with an adjustable height. It can be used as a standing or sitting desk, and it has a cup holder for convenience. The desk is easy to assemble and disassemble, making it perfect for people who need a portable workspace. The desk is made of durable materials and can hold up to 33 lbs. of weight. It is also easy to clean and maintain. Overall, the Seville Classics OFF65903-4 is a versatile and convenient mobile desk that is perfect for people who need a flexible workspace.

Seville Classics OFF65903-4 is a mobile desk with an adjustable height. It can be used as a standing or sitting desk, and it has a cup holder for convenience. The desk is easy to assemble and disassemble, making it perfect for people who need a portable workspace. The desk is made of durable materials and can hold up to 33 lbs. of weight. It is also easy to clean and maintain. Overall, the Seville Classics OFF65903-4 is a versatile and convenient mobile desk that is perfect for people who need a flexible workspace.

Customer Service Informaon
Telephone: (800) 323-5565
Fax: (310) 533-3899
Hours: 8:30 AM – 4:30 PM (PST)
Email: Suppor[email protected]
Homepage: www.SevilleClassics.com
052019
AIRLIFT® XL Sit-Stand Mobile Desk
with Cup Holder
Model #: OFF65903, OFF65904
Thank you for choosing Seville Classics! We hope that you enjoy your new
Airli mobile desk. Please read through this user guide for parts list, assembly
instrucons, frequently asked quesons and further contact informaon.
052019
1
Parts List
L. Top (1)
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at
(800) 323-5565 or send an email to Support@SevilleClassics.com
A. Split washers (4)
M. Cylinder (1)
N. Airli lever (1)
O. Top mount (1)
P. Base mount (1)
Q. Base (1)
B. Washers (4)
C. Tooth washers (3)
E. M6x12 bolts (3)
(for Airli lever)
D. M6x15 bolts (8)
(for Top Mount)
J. M6x20 bolts (3)
(for Base)
R. Casters (2)
T. Hook (1)
F. M8x15 bolts (4)
H. Wrench (1)
G. 5mm hex key (1)
K. 6mm hex key (1)
S. Locking casters (2)
Use Instrucons
1. Roll desk into desired posion.
2. Lock casters to prevent the table from rolling.
3. To li, pull up on the Airli lever.
4. To lower, pull up on the adjustment lever while pressing down on
the table top.
5. Release adjustment lever to lock-in table height.
FAQs
Q. Can I use it without the wheels?
A. No. The base is not at and will wobble without wheels.
Q. How high and how low can my desk go?
A. Maximum height is 45.6 inches. Minimum height is 30.5 inches.
Q. Why won’t my desk adjust its height?
A. The adjustment wire may not be clipped into the adjustment lever
correctly. Reference the diagram in STEP 3 for an example.
Q. Why is my desk adjusng slowly?
A. Desk may adjust slowly aer being unused for a me. To x this,
pull up on the adjustment lever and lightly "pump" the desk top up
and down. The desk should now rise smoothly.
Safety
Do not p the desk over or place upside down.
Do not place more than 33 lbs. on the desk top.
Specicaons
Dimensions: 21.6" W x 25.6" D x (30.5" to 45.6") H
Weight capacity: 33 lbs.
Weight: 32.34 lbs.
6
STEP 8.
Screw CASTERS (R) through
SPLIT WASHERS (A) and
WASHERS (B ) into rear of
BASE (Q).
Repeat for LOCKING
CASTERS (S).
Tighten unl snug with
wrench (H).
STEP 9.
Turn desk over to nish!
Congratulaons!
Enjoy your new AIRLIFT
Mobile Desk!
5
/
Assembly Instrucons
2
STEP 1.
Pull AIRLIFT LEVER (N) on
CYLINDER (M) through
TOP MOUNT (O).
STEP 2.
Aach TOP MOUNT (O)
to CYLINDER (M) with
M8x15 BOLTS (F) and
6 mm hex key (K).
Press cable on AIRLIFT
LEVER (N) through
guides in mount.
STEP 3.
Press cable rmly into
the bracket on the back
of AIRLIFT LEVER (N).
IMPORTANT: Lever will
not work and height will
not adjust if wire is not
clipped in correctly.
Before Aer
STEP 4.
Fit HOOK (T) into grooves
on TOP MOUNT (O).
NOTE! Set hook into
groove on the same side as
the AIRLIFT LEVER (N) cable
to install to the front-side
of desk .
Use the other posion to
install to the rear.
STEP 5.
Align screw holes on
assembly with TOP (L).
Aach assembly with
M6x15 BOLTS (D) and
5 mm hex key (R).
Aach AIRLIFT LEVER (C)
with M6x12 BOLTS (M) and
5 mm hex key (R).
Tighten unl snug.
3
Or
STEP 6.
Fit BASE MOUNT (P)
between BASE (Q) and
CYLINDER (M).
Align holes on BASE (Q)
with BASE MOUNT (P).
IMPORTANT: Make sure
arrows on BASE (Q) and
TOP MOUNT (O) point
toward each other.
Screws on BASE (Q)
should "point" toward
the AIRLIFT LEVER (N).
STEP 7.
Aach BASE (Q) with
M6x20 SCREWS (J)
through TOOTH
WASHERS (C) and
5 mm hex key (G).
Tighten unl snug.
4
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Seville Classics OFF65903-4 Assembly Instructions

Brand
Seville Classics
Model
OFF65903-4
Type
Assembly Instructions

Seville Classics OFF65903-4 is a mobile desk with an adjustable height. It can be used as a standing or sitting desk, and it has a cup holder for convenience. The desk is easy to assemble and disassemble, making it perfect for people who need a portable workspace. The desk is made of durable materials and can hold up to 33 lbs. of weight. It is also easy to clean and maintain. Overall, the Seville Classics OFF65903-4 is a versatile and convenient mobile desk that is perfect for people who need a flexible workspace.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents