JESCO Lighting WS215-BU/SN Installation guide

Connect wires from wall sconce to 120V

power feed in junction box with wire nuts

Companion Wall Sconces

INSTALLATION INSTRUCTIONS

Secure ground lead from wall sconce to

ground wire or a grounded surface

Secure universal mounting bracket to the

junction box with 2 screws (not provided)

Install lamp and turn on power

LAMP MUST NOT EXCEED THE MAXIMUM

WATTAGE AS INDICATED ON THE FIXTURE

LABEL

Mount wall sconce to universal mounting

bracket with the provided screws

www.jescolighting.com

1. Turn o power at fuse box before installing/maintaining/servicing/modifying the system

2. Do not install in damp or wet locations

3. Do not attempt to energize anything other than a qualied lighting xture

4. Check with a qualied electrician before wiring

5. Conrm installation shall be in accordance with NEC and all local codes

NOTE: If you need to shorten the pendant length, please refer to the quick pendant

eld cut instructions below

Save these installation instructions and refer to them when

additions or changes to congurations are made

CAUTION

Read all of these instructions before installation:

This manual is also suitable for

Download PDF