Panasonic KX-F900 User manual

Brand: Panasonic

Model: KX-F900

Category: Telephones

Type: User manual

This manual is also suitable for

Fax Machine KX-F900

900MHz Cordless FAX

Model No. KX-F900

OPERATING

INSTRUCTIONS

Please read these Operating Instructions

before using the unit and save for future

reference.

¡This product is designed for use in the United States of

America, and may not operate in other countries. (See

page 68 for more details.)

¡Este producto ha sido diseñado para su uso en los

Estados Unidos de América, y puede no funcionar

correctamente en otros países. (Consulte la página

68 para tener más detalles.)

FOR OPERATION ASSISTANCE,

CALL 1-800-HELP-FAX (1-800-435-7329)

Contents

Installation and ConnectionRR p. 8

Initial Preparation RRRRRR p. 14

Basic OperationsRRRRRRR p. 20

Advanced Operations RRRR p. 29

Troubleshooting and

Routine Care RRRRRRRR p. 55

General Information RRRRR p. 64

For your future reference

Date of purchase Serial No.

(found on the bottom of the unit)

Dealer’s name and address

Dealer’s telephone number

Thank you for purchasing the Panasonic 900MHz Cordless FAX.

Things you should keep records of

Attach your sales receipt here

Caution:

The Telephone Protection Act of 1991 requires the following information to be clearly stated either at the top or

bottom margin of the ﬁrst message page when transmitting messages via telephone facsimile;

—Date and time of transmission,

—Identiﬁcation of the business, entity or person(s) sending the facsimile, and

—Telephone number of the business, entity or person(s).

To program this information into your facsimile machine, complete all the instructions on pages 14 through 16.

This manual is copyrighted by Kyushu Matsushita Electric Co., Ltd. (KME) and its licensee. Under the

consent of KME and its licensee.

j Kyushu Matsushita Electric Co., Ltd. 1996

Included accessories (To order, call toll free 1-800-332-5368.)

PQJA200Z

PQJA59V

PQUS10136Z

¡See page 67 for replace-

ment of the recording paper.

¡If any items are missing, check with place of purchase.

¡The part numbers listed above are subject to change without notice.

¡Save the original carton and packaging.

Power cord RRR 1 pc.

(p. 12)

Telephone line

cord RRRRRR 1 pc.

(p. 12)

Cordless handset 1 pc.

(p. 11)

Battery cover RR 1 pc.

(p. 11)

Battery RRRRR 1 pc.

(p. 11, 61)

Paper stacker RR 1 pc.

(p. 11)

Recording paper R 1 pc.

(p. 10)

Spare battery

cover RRRRRR 1 pc.

(p. 11)

PQKK10066Z1

PQKK10065Z1

KX-A92

For best performance

Battery charge

To power the handset, install the battery (p. 11) and charge it for about 15 hours before initial use (p. 13).

Operating distance/noise

Calls are transmitted between the main unit and the handset using wireless radio waves. For maximum

distance and noise free operation, the recommended main unit location is:

In a HIGH and CENTRAL

location with no obstructions

such as walls.

Away from electrical

appliances such as a TV,

radio, or personal computer.

Raise the

antenna.

Important safety instructions

When using this unit, basic safety precautions

should always be followed to reduce the risk of ﬁre,

electric shock, or personal injury.

1. Read and understand all instructions.

2. Follow all warnings and instructions marked on

this unit.

3. Unplug this unit from AC outlets before

cleaning. Do not use liquid or aerosol

cleaners. Use a damp cloth for cleaning.

4. Do not use this unit near water, for example,

near a bath tub, wash bowl, kitchen sink, or

the like.

5. Place this unit securely on a stable surface.

Serious damage and/or injury may result if the

unit falls.

6. Do not cover slots and openings on the unit.

They are provided for ventilation and

protection against overheating. Never place

the unit near radiators, or in a place where

proper ventilation is not provided.

7. Use only the power source marked on the unit.

If you are not sure of the type of power

supplied to your home, consult your dealer or

local power company.

8. For Safety purposes this product is equipped

with a three prong grounded plug. If you do

not have this type of outlet, please have one

installed. Do not use any type of adaptor plug

to defeat this safety feature.

9. Do not place objects on the power cord. Install

the unit where no one can step or trip on the

cord.

10. Do not overload wall outlets and extension

cords. This can result in the risk of ﬁre or

electric shock.

11. Never push any objects through slots in this

unit. This may result in the risk of ﬁre or

electric shock. Never spill any liquid on the

unit.

12. To reduce the risk of electric shock, do not

disassemble this unit. Take the unit to an

authorized servicenter when service is

required. Opening or removing covers may

expose you to dangerous voltages or other

risks. Incorrect reassembly can cause electric

shock when the unit is subsequently used.

13. Unplug this unit from the wall outlet and refer

servicing to an authorized servicenter when

the following conditions occur:

A When the power supply cord or plug is

damaged or frayed.

12. B. If liquid has been spilled into the unit.

12. C. If the unit has been exposed to rain or

water.

12. D. If the unit does not work normally by

following the operating instructions. Adjust

only controls covered by the operating

instructions. Improper adjustment may

require extensive work by an authorized

servicenter.

12. E. If the unit has been dropped or physically

damaged.

12. F. If the unit exhibits a distinct change in

performance.

14. During thunderstorms, avoid using telephones

except cordless types. There may be a remote

risk of an electric shock from lightning.

15. Do not use this unit to report a gas leak, when

in the vicinity of the leak.

CAUTION:

To reduce the risk of ﬁre or injury to persons, read

and follow these instructions.

1. Use only the battery(ies) speciﬁed.

2. Do not dispose of the battery(ies) in a ﬁre. They

may explode. Check with local waste

management codes for special disposal

instructions.

3. Do not open or mutilate the battery(ies).

Released electrolyte is corrosive and may

cause burns or injury to the eyes or skin. The

electrolyte may be toxic if swallowed.

4. Exercise care in handling batteries in order not

to short the battery to conductive materials such

as rings, bracelets, and keys. The battery

and/or conductor may overheat and cause

burns.

5. Charge the battery(ies) provided with or

identiﬁed for use with this product only in

accordance with the instructions and limitations

speciﬁed in this manual.

INSTALLATION:

1. Never install telephone wiring during a lightning

storm.

2. Never install telephone jacks in wet locations

unless the jack is speciﬁcally designed for wet

locations.

3. Never touch uninsulated telephone wires or

terminals unless the telephone line has been

disconnected at the network interface.

4. Use caution when installing or modifying

telephone lines.

WARNING:

To prevent the risk of ﬁre or electrical shock, do

not expose this product to rain or any type of

moisture.

SAVE THESE INSTRUCTIONS

OTHER INFORMATION

¡Keep the unit away from electrical noise-

generating devices, such as ﬂuorescent lamps

and motors.

¡The unit should be kept free from dust, high

temperature, and vibration.

¡The unit should not be exposed to direct sunlight.

¡Do not place heavy objects on top of this unit.

¡Do not touch the plug with wet hands.

Automatic security code setting

Whenever you place the handset on the main unit,

the unit automatically selects one of a million

security codes. These codes help to avoid

unauthorized use of your telephone line by another

cordless telephone.

Location of controls RRRRRRRRRRRRRRRRRRRRRRRRR 8

Installing your unit RRRRRRRRRRRRRRRRRRRRRRRRRR 10

Connections RRRRRRRRRRRRRRRRRRRRRRRRRRRR 12

Battery charge RRRRRRRRRRRRRRRRRRRRRRRRRRR 13

Table of Contents

Installation and Connection

Initial Preparation

Setting the date, time, logo and facsimile telephone number RRRRRRR 14

Adjusting volumesRRRRRRRRRRRRRRRRRRRRRRRRRR 17

Selecting the receive mode RRRRRRRRRRRRRRRRRRRRRR 18

Making/answering voice calls RRRRRRRRRRRRRRRRRRRRR 20

Making calls with the handsetRRRRRRRRRRRRRRRRRRRR 20

Answering calls with the handset RRRRRRRRRRRRRRRRRR 20

Making calls with the main unit RRRRRRRRRRRRRRRRRRR 21

Answering calls with the main unitRRRRRRRRRRRRRRRRRR 21

Transmitting documents RRRRRRRRRRRRRRRRRRRRRRR 22

Receiving documents RRRRRRRRRRRRRRRRRRRRRRRR 24

Making a copy RRRRRRRRRRRRRRRRRRRRRRRRRRR 28

Basic Operations

Advanced Operations

Automatic dialing

Storing phone numbers for automatic dialing RRRRRRRRRRRRRR 29

Storing phone numbers in the main unit RRRRRRRRRRRRRRR 29

Storing phone numbers in the handsetRRRRRRRRRRRRRRRR 30

Making voice calls using automatic dialing RRRRRRRRRRRRRRR 31

Dialing with the handset RRRRRRRRRRRRRRRRRRRRRR 31

Dialing with the main unitRRRRRRRRRRRRRRRRRRRRRR 31

Transmitting documents using automatic dialingRRRRRRRRRRRRR 32

Electronic telephone directoryRRRRRRRRRRRRRRRRRRRRR 33

Telephone

Intercom between the handset and the main unit RRRRRRRRRRRR 34

Transferring a call using intercom RRRRRRRRRRRRRRRRRRR 35

Voice contact

(talking to the caller during or after fax reception or transmission) R 36

TONE, FLASH and PAUSE buttons RRRRRRRRRRRRRRRRRR 37

Installation and

Connection

Installation and

Connection

Facsimile transmission

Polling (retrieving fax documents) RRRRRRRRRRRRRRRRRRRR 38

Delayed transmission

(sending a fax at a later time) RRRRRRRRRRRR 39

Sending documents overseasRRRRRRRRRRRRRRRRRRRRR 40

Changing the logo print positionRRRRRRRRRRRRRRRRRRRR 40

Facsimile reception

Remote fax receiving (using an extension to receive a fax message) RRRRR 41

Junk mail prohibitor

(preventing the reception of unwanted fax documents) RRR 42

Receiving with distinctive ring service RRRRRRRRRRRRRRRRR 43

Signaling your pager that you have received a fax document RRRRRRR 44

Setting the friendly reception RRRRRRRRRRRRRRRRRRRRR 45

Others

Using an external telephone answering machine RRRRRRRRRRRR 46

Changing the display contrastRRRRRRRRRRRRRRRRRRRRR 50

Resetting the advanced features RRRRRRRRRRRRRRRRRRR 50

Summary of user programmable featuresRRRRRRRRRRRRRRRR 51

Printing reports and lists RRRRRRRRRRRRRRRRRRRRRRR 52

Error messages on the display RRRRRRRRRRRRRRRRRRRR 55

Before requesting help RRRRRRRRRRRRRRRRRRRRRRRR 56

Clearing a recording paper jam RRRRRRRRRRRRRRRRRRRR 59

Clearing a document jamRRRRRRRRRRRRRRRRRRRRRRR 60

Adjusting the feeder pressure RRRRRRRRRRRRRRRRRRRRR 60

Optional spare battery RRRRRRRRRRRRRRRRRRRRRRRR 61

Cleaning the unit RRRRRRRRRRRRRRRRRRRRRRRRRR 63

FCC informationRRRRRRRRRRRRRRRRRRRRRRRRRRR 64

Limited warranty RRRRRRRRRRRRRRRRRRRRRRRRRR 65

Service center directory RRRRRRRRRRRRRRRRRRRRRRR 66

Information for usersRRRRRRRRRRRRRRRRRRRRRRRRR 67

Accessory order information RRRRRRRRRRRRRRRRRRRRR 67

SpeciﬁcationsRRRRRRRRRRRRRRRRRRRRRRRRRRRR 68

Speed dialer list for the main unit RRRRRRRRRRRRRRRRRRR 69

Memory station list for the handset RRRRRRRRRRRRRRRRRR 69

Index RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR 71

Troubleshooting and Routine Care

General Information

Initial Preparation Basic Operations

Advanced

Operations

Troubleshooting

and Routine Care

General

Information

Location of controls

Handset

Antenna

INTERCOM indicator

(p. 34)

INTERCOM

(p. 34)

AUTO (p. 30, 31)

FLASH

(p. 37)

VOLUME/RINGER

(p. 17)

CH (p. 20)

Charge contacts (p. 63)

TALK/BATT (Battery)

LOW indicator

(p. 13, 20, 30)

TALK (p. 20)

TONE (p. 37)

PROGRAM (p. 30)

REDIAL/PAUSE

(p. 20, 37)

Installation and

Connection

SPARE CHARGE CHARGE

Main unit

Paper stacker (p. 11)

Document feeder

tray (p. 22)

Document guide(s)

(p. 22)

Front lid open button

(p. 60)

Document exit

Document entrance

Microphone (p. 21)

Spare battery

cover (p. 11, 61)

Front view

2 3

4 5 6

7 8 9

TONE

REDIAL/PAUSEFLASH

MUTE

ABC DEF

GHI JKL MNO

PRS TUV WXY

OPER

MIC

HELP DIRECTORY

MENU RESOLUTION

AUTO RECEIVE

FAX

4 5

6 7 8

9 10

LOWER

VOLUME

STOP START/COPY/

SET

RINGER

SP-PHONE

1 2 3

SP-PHONE

Dial keypad

HELP (p. 12)

START/COPY/SET

STOP

VOLUME

(p. 17)

AUTO RECEIVE

(p. 18)

SP-PHONE

(p. 21, 36)

MUTE

(p. 21)

REDIAL/PAUSE

(p. 21, 37)

FLASH

(p. 37)

TONE

(p. 37)

LOWER (p. 29, 31, 32)

Direct call stations

RESOLUTION (p. 22)

Display panel

DIRECTORY

(p. 31, 32, 33)

LOCATOR/

INTERCOM

IN USE

LOCATOR/INTERCOM (p. 34, 35)

IN USE indicator (p. 34)

Control panel

SPARE CHARGE indicator

CHARGE indicator

Battery charger (beneath

the cover) (p. 61)

Charge contacts

(p. 63)

Antenna

A Open the back lid by lifting up the tabs

located on both sides.

B Install a recording paper roll in the main

unit.

¡Make sure that the shiny side of the

paper is facing down and there is no

slack, tape, or glue residue on the paper

roll.

Note:

¡Only use the included roll of paper or speciﬁed recording paper, or else the print quality may be affected

and/or excessive thermal head wear may occur.

¡The beginning of some recording paper rolls are secured with glue or tape.

Cut approximately 150 mm (6 inches) from the new roll of paper prior to installation.

¡To order recording paper, see page 67.

Insert the leading edge of the recording paper

between the recording paper roller and the

silver plate.

Close the back lid by gently pressing down

on both ends.

correct

incorrect

Recording paper roller

Silver plate

Tab

Installing your unit

Installing the recording paper

Paper stacker

Install the paper stacker.

Installing the paper stacker

Installation and

Connection

Installing the battery in the handset

Install the battery as shown observing the

proper polarity.

Install the battery cover.

Installing the spare battery cover on the main unit

Close the spare battery cover.

Spare battery cover

Battery

Battery cover

Note:

¡For additional equipment protection, we recommend the use of a surge protector. The following types are

available; TELESPIKE BLOK MODEL TSB (TRIPPE MFG. CO.), SPIKE BLOK MODEL SK6-0 (TRIPPE

MFG. CO.), SUPER MAX (PANAMAX) or MP1 (ITW LINX).

¡You can connect an extension phone or a telephone answering machine to the unit after removing the tab on

the external telephone jack (EXT). See page 46.

¡When you operate this product, the power outlet should be near the product and easily accessible.

Connections

Power outlet

(120 V, 60 Hz)

Single telephone line

(RJ11C)

Power cord

Connect to

“LINE”.

Helpful hint:

¡If assistance is needed, press (HELP). The unit will print a quick reference.

Power surge

protector

Line surge

protector

(

)

( )

(HELP)

Telephone line cord

Dialing mode switch:

Set to TONE.

¡If you cannot dial,

set to PULSE.

TONE

DIALING MODE

PULSE

Installation and

Connection

Battery charge

Place the handset on the main unit for about 15 hours.

¡The CHARGE indicator lights.

Recharge

When the TALK/BATT LOW indicator ﬂashes

slowly or the unit beeps intermittently, recharge the

battery.

If you do not want to wait until the battery is

fully recharged, we recommend you purchase

an optional spare battery (page 61).

Standard battery life

If your Panasonic battery is fully charged;

¡Battery life may vary depending on usage conditions and ambient temperature.

¡Clean the handset and the main unit charge contacts with a dry soft cloth once a month, or the battery

may not charge properly (see page 63).

¡Once the battery is fully charged, you do not have to place the handset on the main unit until the TALK/BATT

LOW indicator ﬂashes slowly.

¡The battery cannot be overcharged.

While in use (TALK)

While not in use (Stand-By)

Up to about 4.5 hours

Up to about 14 days

TALK/BATT LOW

indicator

CHARGE indicator

Handset

456

789

Setting your logo

Usually the logo is a company, division or personal name in an abbreviated form.

Press (MENU).

Press K, then @B.

Press (START/COPY/SET).

Enter your logo up to 30 characters.

¡Refer to the instructions on page 15.

Press (START/COPY/SET).

Press (MENU).

LOGO=

YOUR LOGO

SYSTEM SET UP

(START/COPY/SET)

(MENU)

Dial keypad

456

789

Setting the date, time, logo and facsimile

telephone number

Before using your unit, program the correct date and time, your logo and your facsimile telephone

number.

This information will be printed on the top of each page transmitted from your unit.

To change the print position, see page 40.

Setting the date and time

Press (MENU).

Press K, then @A.

Press (START/COPY/SET).

Enter the correct month/day/year/hour/minute

by selecting each 2 digits.

Then press J for AM or K for PM.

Example: Aug. 10 1996, 3:00PM

Press @H A@ IF @C

@@, then press K for PM.

Press (START/COPY/SET).

Press (MENU).

SET DATE & TIME

SYSTEM SET UP

(MENU)

(STOP)

(START/COPY/SET)

Dial keypad

Note:

¡If you make a mistake while programming,

press (STOP) then make corrections.

¡The accuracy of the clock will be

approximately L60 seconds a month.

Initial Preparation

Number of times

Keys

How to enter characters and symbols

The dial keypad and the direct call stations can be used as character input keys and command keys. Pressing

0–9 and direct call station 1 will alternately select a character as shown below.

INSERT key (Used to insert one character or one space.)

SPACE key (Used to replace one character with a space.)

DELETE key (Used to delete one character.)

¤ key (Used to move the cursor to the right.)

⁄ key (Used to move the cursor to the left.)

’

–

}

{

]

)

[

(

;

For example, when entering “Mike” as your logo:

To correct a mistake while

programming

Use K and J to move the cursor to the incorrect

character, then make the correction.

Press (STOP) to delete the character to the left of

the cursor.

To see the layout of the direct call

station keys

Remove the directory card cover with a pencil or

similar object and turn the directory card over.

Note:

¡If you use the same number key continuously to enter the next character, press K to move the cursor.

Press E ﬁve times.

Press C ﬁve times.

LOGO=Mike

LOGO=Mik

Press F.

Press D six times.

LOGO=Mi

LOGO=M

2 3

4 5 6

7 8 9

Setting your facsimile telephone number

Press (MENU).

Press K, then @ C.

Press (START/COPY/SET).

Enter your facsimile telephone number up to

20 digits.

¡The K button inserts a space and the J

button a “+”.

¡If you make a mistake, press (STOP) to

delete the wrong number to the left of the

cursor.

Press (START/COPY/SET).

Press (MENU).

NO.=

YOUR TEL NO.

SYSTEM SET UP

(MENU)

(START/COPY/SET)

Dial keypad

(STOP)

Initial Preparation

Adjusting volumes

Main unit

»»

Ringer volume

»»

3 levels (high/low/off) are available.

Press (VOLUME) (Z/Y) while the unit is idle.

»»

To turn the ringer off:

1. Press (VOLUME) (Z) repeatedly.

¡The following message will be shown.

»»

2. Press (START/COPY/SET).

»»

While the ringer volume is set to off:

The display will show the following message and the

unit will not ring when receiving a call.

»»

Speaker volume

»»

8 levels (high to low) are available.

Press (VOLUME) (Z/Y) while using the

speakerphone.

Handset

»»

Ringer volume

»»

3 levels (high/low/off) are available.

Be sure the TALK/BATT LOW indicator light is off.

To set to high or low:

Press (VOLUME/RINGER).

»»

To turn the ringer off:

While pressing (VOLUME/RINGER), press @ until

2 beeps sound.

»»

To turn the ringer on:

Press (VOLUME/RINGER).

¡The ringer sounds at the high level.

»»

Handset volume

»»

2 levels (high/normal) are available.

Press (VOLUME/RINGER) while talking.

»»

Selecting the ringer tone (2 types)

»»

When the TALK/BATT LOW indicator light is off,

press (VOLUME/RINGER), then press J within

5 seconds. The selected ringer tone sounds.

RINGER OFF

RINGER OFF=OK?

(VOLUME)

(START/COPY/SET)

(VOLUME/RINGER)

TALK/BATT LOW

indicator

AUTO RECEIVE

FAX

Selecting the receive mode

This unit has two types of receive modes; AUTO RECEIVE and MANUAL RECEIVE.

—When you are unable to answer, set the AUTO RECEIVE mode.

—When you are available, set the MANUAL RECEIVE mode.

Press (AUTO\RECEIVE) to switch to the desired mode.

» AUTO RECEIVE mode

The FAX indicator light goes on.

» MANUAL RECEIVE mode

The FAX indicator light goes off.

AUTO RECEIVE

FAX

AUTO RECEIVE

FAX

EXT.TAM mode:

Select this mode when you connect a telephone

answering machine to the external telephone

(EXT) jack and leave the home or office (see

page 46).

Display:

¡If your external telephone does not have an

answering/recording feature, do not select this

mode. We recommend that you select the

TEL mode.

EXT.TAM MODE

¡You can select the TEL/FAX mode instead of the

TEL mode as a MANUAL RECEIVE mode

(page 19).

FAX mode: (pre-selected setting)

Select this mode when you use the unit solely

as a fax machine (see page 25).

Display:

FAX MODE

TEL/FAX mode:

Select this mode when you are near the unit

and do not want to hear the unit ring when

faxes are received but wish to answer voice

calls (see pages 26, 27 and 28).

Display:

TEL/FAX MODE

Note:

¡Regardless of the mode you select, you can always place calls and send faxes.

TEL mode: (pre-selected setting)

Select this mode when you wish to answer all

calls manually.

Display:

¡When no one answers an incoming call by 15

rings, the unit will temporarily activate the fax

function to receive documents.

TEL MODE

¡You can select the EXT.TAM mode instead of the

FAX mode as an AUTO RECEIVE mode (page 19).

Initial Preparation

2 3

4 5 6

7 8 9

2 3

4 5 6

7 8 9

Changing the setting of the AUTO RECEIVE mode

You can select either FAX mode (pre-selected setting) or EXT.TAM mode in the AUTO RECEIVE mode.

If you want to change the setting, follow the steps below.

Press (MENU).

Press K, then @ E.

Press (START/COPY/SET).

Press (‹) or (›) to select the desired

setting.

Press (START/COPY/SET).

Press (MENU)

MODE=FAX [LM]

AUTO RECEIVE

SYSTEM SET UP

Dial keypad

(‹) (›) (START/COPY/SET)

(MENU)

Changing the setting of the MANUAL RECEIVE mode

You can select either TEL mode (pre-selected setting) or TEL/FAX mode in the MANUAL RECEIVE mode.

If you want to change the setting, follow the steps below.

Press (MENU).

Press K, then @ H.

Press (START/COPY/SET).

Press (‹) or (›) to select the desired

setting.

Press (START/COPY/SET).

Press (MENU)

MODE=TEL [LM]

MANUAL RECEIVE

SYSTEM SET UP

Dial keypad

(‹) (›)

(START/COPY/SET)

(MENU)

Making/answering voice calls

Making calls with the handset

Press (TALK).

¡The TALK/BATT LOW indicator lights.

Dial a phone number.

¡If you misdial, hang up and dial again.

To hang up, press (TALK) or place the

handset on the main unit.

¡The indicator light goes out.

To redial the last number

Press (TALK), then press (REDIAL/PAUSE).

Note:

¡If an alarm tone sounds in step 1, move towards

the main unit or place the handset on the main

unit. Then try again.

Answering calls with the handset

If noise interferes with the

conversation

Press (CH) to select a clear channel or move

closer to the main unit.

Lighted keypad

The dialing buttons will light while dialing and ﬂash

when a call is received.

The lights will go out about 10 seconds after

dialing or answering the call.

If the handset is off the main unit, press

(TALK).

¡You can also answer a call by pressing any

dialing button 0 to 9, *, or # (—Any key

talk).

If on the main unit, just lift it.

To hang up, press (TALK) or place the

handset on the main unit.

(TALK)

(REDIAL/PAUSE)

(CH)

TALK/BATT LOW

indicator

(TALK)

Dial keypad

Page is loading ...

Panasonic KX-F900 User manual

Brand: Panasonic

Model: KX-F900

Category: Telephones

Type: User manual

This manual is also suitable for

Fax Machine KX-F900

Download PDF

report

Panasonic KX-F900 User manual

This manual is also suitable for

Panasonic KX-F900 User manual

Related papers

Other documents