SPT 40062 Installation guide

How to replace control board instruction:

1. Open left side door, pull back top part of door seal. (See IMG-01)

2. Remove the screw. (See IMG-01).

3. Front control panel shall loosen. (See IMG-02)

4. Pull out the control panel. (See IMG-03)

5. Unscrew the two screws. (See IMG-4)

6. Undo wire harness and install new control board. (See IMG-5)

Follow the same instructions in reverse to install new control board.

Please let me know if this helps. Thanks.

<IMG-01> <IMG-02>

<IMG-03> <IMG-04>

<IMG-05>